Sign In Join 



Lincoln LS: Brakes

49 messages,  Last post on Aug 28, 2009 at 2:09 PM

You are in the Lincoln LS Forum. Your Hosts are pat & karens

What is this discussion about? Lincoln LS, Brakes, Sedan


Messages Page 3 of 5
1
2
3
4
5
Prev
Next
Last
Go To Msg #
Search This Discussion

#20 of 49
rattling brake caliper and overheating engine by 02linc
Jun 30, 2007 (8:27 pm)
Reply
I have an 02 Lincoln LS V8 that i absolutly love but im alittle scared of what problems its going to give me. I have been taking it into a mechanic to figure out what is making a rattling noise on the front left brake. They think it is the caliper and they said it could cost up to $300 bucks..Any suggestions? It also over heats once in awhile and make a loud turbine type noise and will eventually slowly cool down to normal temp. Why is this and can i do anything to make it stop overheating??
#21 of 49
Re: rattling brake caliper and overheating engine [02linc] by akirby
Jul 01, 2007 (7:14 am)
Reply

Replying to: 02linc (Jun 30, 2007 9:27 pm)

Sounds like a bad thermostat which is the first thing to replace since it's the least expensive. After that you're looking at the cooling fan.
 
Not sure about the brake noise but I'd replace the pads first and make sure all the clips are in place on the new ones - and check all the components for anything that's loose. The front sway bar bushings are prone to wear out but that's more of a clunk than a rattle.
#22 of 49
Re: rattling brake caliper and overheating engine [02linc] by ezaircon4jc
Jul 01, 2007 (6:12 pm)
Reply

Replying to: 02linc (Jun 30, 2007 9:27 pm)

Actually, from my experience it is the fan. My fan was doing that for about a year before it finally gave out. Then it needed the fan motor and hydraulic pump! I didn't know it was the fan until my favorite, straight-shooting dealer told me that was one of the symptoms.
#23 of 49
Re: rattling brake caliper and overheating engine [ezaircon4jc] by akirby
Jul 02, 2007 (4:38 am)
Reply

Replying to: ezaircon4jc (Jul 01, 2007 7:12 pm)

I was afraid of that but was trying to be optimistic that it might be the much less expensive thermostat.
#24 of 49
Re: rattling brake caliper and overheating engine [akirby] by 02linc
Jul 02, 2007 (6:46 pm)
Reply

Replying to: akirby (Jul 02, 2007 5:38 am)

well both are useful information..thanks bunches!! But lucky me,now my airbag warning light is constantly on any suggestions for that or should i just take it to the dealer??
#25 of 49
Re: rattling brake caliper and overheating engine [02linc] by akirby
Jul 03, 2007 (5:01 am)
Reply

Replying to: 02linc (Jul 02, 2007 7:46 pm)

It's the wiring harness under the seat. There is supposedly a TSB for it but I don't have the text.
#26 of 49
Re: rattling brake caliper and overheating engine [akirby] by 02linc
Jul 04, 2007 (8:44 am)
Reply

Replying to: akirby (Jul 03, 2007 6:01 am)

mk. is there anything i can do to fix it or should i just take it to the dealer?
#27 of 49
Re: rattling brake caliper and overheating engine [02linc] by akirby
Jul 04, 2007 (10:38 am)
Reply

Replying to: 02linc (Jul 04, 2007 9:44 am)

You might be able to replace the harness but I'd at least let the dealer diagnose it. Airbags can be tricky and dangerous.
#28 of 49
abs troubles 2000 lincoln ls v6 by nelson149
Nov 18, 2007 (1:55 pm)
Reply
#29 of 49
abs troubles 2000 lincoln ls v6 by nelson149
Nov 18, 2007 (1:55 pm)
Reply
i recently went to replace a my lower ball joint and found out that i had to replace the searing knuckle also but to do this i had to remove the hub assembly wich is very stuck in the old part so i opted to buy a new one (this is where the problem comes in) ive purchesed a new one and it would not communicate with the car and gave me a abs light on plus the brake light and also the traction control so ij thought it was a bad part so i took it out and got a new one same problem so i went top the dealer and got a part from them thinking it would solve my troubles but ive got the same problem. the funny thing is that when i put the old part back in the car it works just fine am i missing some thing is there some thing that i need to do so that the car will see the new part?
any help will be greatly accepted imn at my wits end

Messages Page 3 of 5
1
2
3
4
5
Prev
Next
Last
Go To Msg #
Search This Discussion
To POST a message, please Sign In.

New? Join Now!

Forum Tools

Please sign in.
Email Address:

Password:

Forgot Password?

Search Forums

Enter Keyword(s)

Advanced Search

Browse by Vehicle



View All Vehicles
Advertisement
Ask the Community
See What People Are Asking

Browse by Board

Browse by Topic


View All Topics

Today's Chats

Advertisement