Sign In Join 



2009 Mazda6

2118 messages,  Last post on Nov 25, 2009 at 9:10 PM

You are in the Mazda6 Forum. Your Hosts are pat & karens

What is this discussion about? Mazda MAZDA6, Future Vehicle, Sedan


Messages Page 204 of 213
1
...
201
202
203
204
205
206
207
...
213
Prev
Next
Last
Go To Msg #
Search This Discussion

#2027 of 2118
Re: Mazda 6 Interior [ianmatic] by adamb1
Jul 09, 2009 (5:32 am)
Reply

Replying to: ianmatic (Jul 09, 2009 5:25 am)

I have an '09 Mazda 6s Grand Touring. We have had it for only 3 months and have 3,000 miles.
 
I have noted no problems with the interior so far. Everything is tight and quiet. What trim level do you have?
#2028 of 2118
Re: Mazda 6 Interior [ianmatic] by flieger
Jul 09, 2009 (5:51 am)
Reply

Replying to: ianmatic (Jul 09, 2009 5:25 am)

Sorry to hear that. Rattling is one of the most annoying things in a car.
I have the '09 with convenience pkg/moonroof, and have no rattling noises at all (7k miles).
I would have this issue fixed asap under warranty.
 
Christoph
#2029 of 2118
Re: Mazda 6 Interior [ianmatic] by redmazda3
Jul 09, 2009 (6:24 am)
Reply
I have just purchased an 09 Mazda 6 Grand Touring and have put 850 miles on it and am loving it. However, the back shelf where the speakers are rattles all the time. The dealer has ordered a new back shelf. Hopefully this will solve the problem. Everything else is tight with no rattles. Any car can develope rattles from many different sources. I hope your dealer can fix all of the rattles.
#2030 of 2118
Re: Mazda 6 Interior [adamb1] by ianmatic
Jul 09, 2009 (10:03 am)
Reply

Replying to: adamb1 (Jul 09, 2009 5:32 am)

I have the 09 I Touring model
#2031 of 2118
Mazda 6 Interior by ianmatic
Jul 09, 2009 (10:15 am)
Reply
Yeh i will have the dealer look at all the problem. if they cant fix it hopefully i can swap for a speed6! that would be sweet. thanks for the input guys
#2032 of 2118
Re: Mazda 6 Interior [ianmatic] by pats1fan
Jul 09, 2009 (2:00 pm)
Reply

Replying to: ianmatic (Jul 09, 2009 5:25 am)

Sure do. Have a very annoying rattle from the center console. I would also consider taking it in if I didn't know it would be a complete waste of time.
#2033 of 2118
Re: Mazda 6 Interior [ianmatic] by chriso7
Jul 09, 2009 (6:21 pm)
Reply

Replying to: ianmatic (Jul 09, 2009 5:25 am)

I have an I Touring with conv pkg, ~ 1800 miles. I have heard a few times a rattle above the driver's sun visor. However I have been noticing a more persistent "clicking" type noise (one click for each bump in road) coming from the center air vents, then after so many of those clicks it changes to a rattle whether moving or not. Pressing down on the "shelf" above the vents seems to stop it for awhile and pushing up the overhang of the readout display also helped it go away today.
 
Do any of you use the drivers door armrest? The indentation from my elbow NEVER goes away, even if I don't use it. You can't see it so much due to the thick vinyl covering but rubbing you fingers over it you definitely feel it. Does anyone have this problem too?
#2034 of 2118
Re: Mazda 6 Interior [chriso7] by venture
Jul 09, 2009 (7:25 pm)
Reply

Replying to: chriso7 (Jul 09, 2009 6:21 pm)

Do any of you use the drivers door armrest? The indentation from my elbow NEVER goes away, even if I don't use it.
 
Funny you should mention this. I was thinking about it today and reached over and ran my hand along the arm rest. There is a small indentation where I rest my elbow at times. I also must say that it really doesn't bother me.
 
I've had my 6s GT since October and not a rattle, squeek, gurgle, or click anywhere.
 
I am having the passenger rear door handle replaced on Tuesday from the recall.
#2035 of 2118
Re: Mazda 6 Interior [pats1fan] by ianmatic
Jul 10, 2009 (8:43 am)
Reply

Replying to: pats1fan (Jul 09, 2009 2:00 pm)

Yeh i wonder what the dealership would actually do to fix the center console rattle problem. i have a feeling they will just ignore it and gave me an bs excuse. I shall keep you guys updated on tha stats.
#2036 of 2118
Re: Mazda 6 Interior [venture] by chriso7
Jul 10, 2009 (4:21 pm)
Reply

Replying to: venture (Jul 09, 2009 7:25 pm)

I got mine in October too. I wonder if the earlier production models had a wrong formula of foam made?
 
The last 5 digits of my VIN are 3XXXX. I noticed on earlier produced cars at my purchase time that the 3 was a 1 or 2. Does anyone else have the armrest indentation??

Messages Page 204 of 213
1
...
201
202
203
204
205
206
207
...
213
Prev
Next
Last
Go To Msg #
Search This Discussion
To POST a message, please Sign In.

New? Join Now!

Forum Tools

Please sign in.
Email Address:

Password:

Forgot Password?

Search Forums

Enter Keyword(s)

Advanced Search

Browse by Vehicle



View All Vehicles
Advertisement
Ask the Community
See What People Are Asking

Browse by Board

Browse by Topic


View All Topics

Today's Chats

Advertisement