Sign In Join 



2009 Mazda6

2099 messages,  Last post on Nov 10, 2009 at 1:36 PM

You are in the Mazda6 Forum. Your Hosts are pat & karens

What is this discussion about? Mazda MAZDA6, Future Vehicle, Sedan


Messages Page 193 of 211
1
...
190
191
192
193
194
195
196
...
211
Prev
Next
Last
Go To Msg #
Search This Discussion

#1918 of 2099
Re: Design Flaw??? [chriso5] by pamn
Jan 16, 2009 (7:22 am)
Reply

Replying to: chriso5 (Jan 12, 2009 8:20 pm)

The flake on the front bumper of my car is probably about the size of a dime. Underneath the paint is hard plastic. After a few days of back and forth with the bodyshop guy and Mazda, I was able to speak with the owner of the dealership and have him look at the car. He's agreed to repair it correctly (the body shop guy wanted to mix paint and apply). They're going to put a pressure washer on it to make sure that no other paint will come off and then feather out the spot, repaint and apply clearcoat to the entire bumper. Couldn't have asked for more. He understood my frustrations and did the right thing. We'll see how it turns out.
#1919 of 2099
Re: Design Flaw??? [pamn] by DBM89
Jan 17, 2009 (6:31 pm)
Reply

Replying to: pamn (Jan 09, 2009 9:05 am)

My dad bought me a Mazda 6 2009, s Grand Touring, and has a several paint problem. The paint of my car, has stains on all the car. The only thing that accept Mazda, is to re-paint all the car, free, but, i wanted to change it to a new one, because i do not trust the quality of the body shop of Mazda here in Mexico. The most surprising thing, my best friend bought the same car, in the same color(silver), and has the same problem, unless than my car. Where is the quality of Mazda? Please check your car, if you have a Mazda 6 09 silver color. This stains, are like white, only you can see on the sun, in certain angles.
#1920 of 2099
Re: Design Flaw??? [DBM89] by m6user
Jan 17, 2009 (8:02 pm)
Reply

Replying to: DBM89 (Jan 17, 2009 6:31 pm)

Since something like this hasn't been reported widely, I would venture a guess that this happened during shipment of the vehicle between Detroit and Mexico.
#1921 of 2099
Re: Design Flaw??? [m6user] by aviboy97
Jan 17, 2009 (9:15 pm)
Reply

Replying to: m6user (Jan 17, 2009 8:02 pm)

since the Mazda6 under goes numerous quality check point through out the production process, I highly doubt there is a quality problem, but rather an isolated incident. Remember, you have a metallic paint. It will shimmer in the sunlight.
#1922 of 2099
2009 Mazda6 Colors by oceana143
Jan 27, 2009 (2:09 pm)
Reply

Replying to: aviboy97 (Jan 17, 2009 9:15 pm)

What colors do you think this car looks best in? What colors don't work as well?
#1923 of 2099
by maxamillion85
Jan 27, 2009 (4:02 pm)
Reply
Colors that work well:
 Brilliant Silver, Kona Blue, Sangria Red (on V6 models) and Dark Cherry.
 
Colors that don't work well:
Comet Gray, Smokestone and Light Ice Blue...
#1924 of 2099
by trinitywolf
Jan 28, 2009 (10:19 am)
Reply
For sure not the light ice blue. How do you spell u g l y?
 
 It is hard to keep clean but I dig my black 6.
#1925 of 2099
Re: [trinitywolf] by jkobty2
Jan 28, 2009 (11:56 am)
Reply

Replying to: trinitywolf (Jan 28, 2009 10:19 am)

These are the best colors in my opinion, in order
1. Blue (2 tone interior is great)
2. Black (If it comes in 2 tone interior would be even better).
3. Dark red (I am not sure what it is called)
4. Red
5. Grey
 
Worst colors
1. White
2. Silver
#1926 of 2099
Re: Snow tires [mz6greyghost] by sedmund
Jan 28, 2009 (8:26 pm)
Reply

Replying to: mz6greyghost (Dec 18, 2008 5:40 am)

I went with hankook w409 winter i pike snow tires on 17" maxim wheels couple of weeks ago. Snow handling of these tires is awesome. We had about 6 inches of snow today and my 6 went up my un-plowed steep driveway with ease! Amazing what a difference snow tires can make! These tires also have decent dry handling and pretty quiet on highway driving. Very happy with them so far.
#1927 of 2099
Re: [trinitywolf] by darkmanrob85
Jan 30, 2009 (12:45 pm)
Reply

Replying to: trinitywolf (Jan 28, 2009 10:19 am)

Yeah i have a black 6 too. I try to wash it every other week. Especially since I just got some 20" rims put on . I need lowering kit now to make everything look straight

Messages Page 193 of 211
1
...
190
191
192
193
194
195
196
...
211
Prev
Next
Last
Go To Msg #
Search This Discussion
To POST a message, please Sign In.

New? Join Now!

Forum Tools

Please sign in.
Email Address:

Password:

Forgot Password?

Search Forums

Enter Keyword(s)

Advanced Search

Browse by Vehicle



View All Vehicles
Advertisement
Ask the Community
See What People Are Asking

Browse by Board

Browse by Topic


View All Topics

Today's Chats

Advertisement