You are here:
Forums
Vans & Minivans
Mazda MPV
Mazda MPV: Error Codes/TSBs/Recalls

65 messages, Last post on Sep 03, 2009 at 8:08 PM
You are in the Mazda MPV Forum. Your Host is Karens
|
Replying to: jlflemmons (Feb 19, 2009 8:11 pm) I know you can buy the coils on ebay on the cheap. http://forum.mpvclub.com/viewtopic.php?t=17565&highlight=coils It could also be a pcv hose, the hose is about $60 from the dealer and install is about $40.
|
|
|
|
|
Replying to: budmantom (Feb 19, 2009 8:32 pm) That is, until I looked at the routing of the front bank coil harness. It doesn't do a sequential route like the rear bank. It comes across the valve cover and in between 5 and 6. Who knows why, but it does, and I got 4 and 6 swapped. Anyway, while fixing that, I found another problem and fixed it. The retention tab on the #5 coil was broken, and the connector was loose on the coil. Couple of ty-wraps later and it is snug as a bug. And the engine runs sweet and sets no codes. But I am not doing another one of these beasties if I can help it. Pulling the plenum just to get to the plugs is just wrong. |
|
|
|
| Anyone know where to find the plugin for the code reader on a 1991 MPV? I've looked both under the dash and all under the hood and can't seem to find it. | |
You are here:
Forums
Vans & Minivans
Mazda MPV
Mazda MPV: Error Codes/TSBs/Recalls
New? Join Now!
Forum Tools
Search Forums
Browse by Vehicle
2006 Mazda MPV



Browse by Board
Browse by Topic
Today's Chats