Ask the Car People.SM


Ford F-Series Braking Questions

44 messages,  Last post on Jan 19, 2013 at 3:56 PM

You are in the Ford F-Series Forum.

What is this discussion about? Ford E-150, Ford F-150, Exterior, Truck

Messages Page 5 of 5

#39 of 44 Problem with Ford F150 ABS braking system by lniehenke

Oct 24, 2010 (3:36 pm)

The left disc brake is pulsating when I try to stop. I removed the fuse that controls this ABS braking system. A indicator light on the dash comes on indicating that the system is not powered up.
The pulsating problem is resolved but I don't have a ABS system. Is this a sensor problem on that left front brake?
How hard is it to replace the brake sensor?

#40 of 44 Getting Access to the ABS Module (1999 Econoline 150) by petecal

Oct 25, 2010 (9:29 am)

My ABS light is on. I think it is a loose connection at the ABS module. (Long story I won't bore you with).
 
It seems the ABS module is attached below the Hydraulic Control Unit and very hard to get to. I am sure I have to move the HCU but it has a few hydraulic tubes connected to it and I can't remove those (cost for dealer to bleed the system) nor do I want to break one.
 
Does anybody know if things can be loosened up enough to get at the ABS module without damaging the HCU connections?
 
Thanks In Advance,
Pete

#41 of 44 Re: F-250 diesel intermittent brake problems [thekraut] by harleyphil

Jun 02, 2011 (6:35 am)

Replying to: thekraut (Sep 28, 2010 6:43 am)
I am working on a freind truck that has the same peoblem. It does the same thing. There is something inside the frame rails under the mastercylinder that the brake lines go to. It says remanufactured and there is a harness going to it It has no power going to it with brakes on or off. It also looks like it has a small motor conected to it like a small pump solenoid. I'm trying to find out what it is and if it has anything to do with the problem. Maybe it can help you. I'm open for any info on this problem.

#42 of 44 Re: F-250 diesel intermittent brake problems [harleyphil] by petecal

Jun 02, 2011 (7:01 am)

Replying to: harleyphil (Jun 02, 2011 6:35 am)
That is the ABS unit. There is a harness, yes, but there is also a power connector.
 
My problems got worse. A full description and my soluthon is at:
 
http://www.fordforum.com/forum/general-tech-11/brake-pedal-goes-floor-24307/
 
If the link does not survive the posting process, go to fordforum.com and search the forums for postings by petec (that's me).

#43 of 44 Re: Getting Access to the ABS Module (1999 Econoline 150) [petecal] by petecal

Jun 02, 2011 (7:06 am)

Replying to: petecal (Oct 25, 2010 9:29 am)
My problems got worse. A full description and my soluthon is at:
  
http://www.fordforum.com/forum/general-tech-11/brake-pedal-goes-floor-24307/
  
If the link does not survive the posting process, go to fordforum.com and search the forums for postings by petec (that's me).
  
Pete

#44 of 44 triger by triger

Jan 19, 2013 (3:56 pm)

f 150 abs activates at 5 mph when slowing down what makes this happen

Messages Page 5 of 5

To POST a message, please Sign In.

Advertisement

Browse by Category

Browse by Vehicle
   View All Vehicles

Browse by Board
Browse by Topic
View All Topics

Edmunds Community

Advertisement