Sign In Join

Ford Ranger Brake Problems

75 messages,  Last post on Aug 02, 2008 at 3:23 PM

You are in the Ford Ranger Forum. Your Host is kcram

What is this discussion about? Ford Ranger, Ford


Messages Page 7 of 9
1
...
3
4
5
6
7
8
9
Prev
Next
Last
Go To Msg #
Search This Discussion

#54 of 75
ABS & Brake light by rangerdude1
Mar 03, 2008 (10:14 am)
Reply
I have a 1997 ford ranger and the ABS & the brake light are both on at the same time any sugestions.
#55 of 75
Need More Braking Power by dwinmac
Mar 03, 2008 (2:25 pm)
Reply
After getting several replies to the original question on different forums replies to the following two questions would really be helpful.
 
Has anyone out there actually done an upgrade to the larger 2 piston calipers from the newer (93-97) rangers on the equivalent of a 1987 Ranger with 2 wheel drive? Is there a kit available? Is there welding involved with the upgrade?
 
Same thing with upgrade to 10 inch drums on the back. Has anyone done this on the equivalent of a 1987 Ranger 2 wheel drive? Is there a kit available? What kind of processes are required. Is it a matter of unbolting the 9 inch and bolting back in the 10 inch or is hack sawing and welding involved or perhaps a whole new axle required?
#56 of 75
Re: ABS & Brake light [rangerdude1] by dwinmac
Mar 03, 2008 (2:47 pm)
Reply

Replying to: rangerdude1 (Mar 03, 2008 10:14 am)

Back in Jan 06 the ABS light on my 98 Ranger would illuminate sometimes after a hard stop but other times for no seeming reason. I took it to my mechanic and they replaced the rotors and brake pads, checked the calipers on the front wheels and cleaned and lubricated the sliders. On the back wheels they cleaned and adjusted the brakes. That corrected the problem.
#57 of 75
Re: ABS & Brake light [rangerdude1] by bolivar
Mar 04, 2008 (3:21 am)
Reply

Replying to: rangerdude1 (Mar 03, 2008 10:14 am)

First thing to check is the fluid level in the master cylinder. Low fluid can cause the ABS light to come on when you use the brake.
#58 of 75
ABS & Brake light by rangerdude1
Mar 06, 2008 (6:19 pm)
Reply
they don't come on when I'm Braking they are on all the time and never go off & I don't know why.
#59 of 75
Re: ABS & Brake light [rangerdude1] by bolivar
Mar 07, 2008 (1:28 am)
Reply

Replying to: rangerdude1 (Mar 06, 2008 6:19 pm)

Well, if the ABS light is on, it is also setting some error code/s.
 
Have the codes pulled and this should give an idea of what is wrong. I don't know if the local parts house can pull ABS codes for free. I think these codes must be pulled from a connector different from the usual diagnoistic connector.
#60 of 75
2001 E-Brake cable by mike409
Apr 22, 2008 (5:36 pm)
Reply
I need the routing of the emergency brake cable for a 2001 XLT 2.5liter, non HDsuspension, with 9" brake drums., and an approx. wheel base of 112". A drawing or photo would be a great help. Thanks.
#61 of 75
brakes or axle bearing? please help!! by plasticman36
Apr 25, 2008 (9:26 pm)
Reply
well i got the truck about 5 month's ago, at first the break's started to lock up every once in awhile then their was a noise that started coming from the left front tire.it sounded like something was stuck in my tire like a swishing sound.so i replaced the breaks,outer bearings,calipers rotors were in good shape.well it helped for about 3 days then all started again but now my abs light is on and my tire shakes a little bit and when i put my truck in 4 wheel drive you can here a bad noise coming from that tire but 4 wheel drive works.can someone please help me out!!
#62 of 75
Re: 99 XLT Intermittent Brake failure [ballpeen] by 96greenmachine
May 14, 2008 (4:54 pm)
Reply

Replying to: ballpeen (Oct 21, 2006 8:16 am)

do you have any idea where to get those parts, cause i have the same problem with my 96 bronco
#63 of 75
Electric Ford Ranger by dwinmac
Jun 11, 2008 (7:52 am)
Reply
It's hard to believe but it is over a year now since I bought the 1987 Ford Ranger in South Carolina and took it to Rhode Island to convert it to an electric vehicle. We had it running last fall but didn't do much with it over the winter. It is up and running now( registered and inspected) in Rhode Island at my brother's house. He has been driving it to work.
 
We ended up putting a new master cylinder and vacuum booster as well as adding a vacuum reservoir to get it to pass inspection.
 
If you want to check it out go to http://web.mac.com/doug1939.
 
If you have any questions you can email me at macdonalddwusa.net

Messages Page 7 of 9
1
...
3
4
5
6
7
8
9
Prev
Next
Last
Go To Msg #
Search This Discussion
To POST a message, please Sign In.

New? Join Now!

Forum Tools

Please sign in.
Email Address:

Password:

Forgot Password?

Search Forums

Enter Keyword(s)

Advanced Search

Browse by Vehicle



View All Vehicles
Advertisement
Ask the Community
See What People Are Asking

Browse by Board

Browse by Topic


View All Topics

Today's Chats

Advertisement