Last post on Oct 30, 2012 at 5:15 PM
You are in the Ford Ranger
What is this discussion about?
Ford Ranger, Ford
#18 of 165 Re: 2002 Ford Ranger brake (area) problems [obyone]
Aug 26, 2007 (10:42 am)
Hey, yeeaa, it's stupid what happened. See, when I got new rotors at a Honda Dealership (because I had an employee discount), they installed the wrong size rotors. I needed 11 inch, they istalled 10 inch. So they slowly ruined my brake pads. Thats what ford found when I broung my truck to them. So, I brought my truck back to honda and they replaced both the rotors and pads for free because it was their mistake. It was pretty funny. But YAY my truckis back to normal.
#19 of 165 Re: 2002 Ford Ranger brake (area) problems [rangergirlie]
Aug 26, 2007 (2:12 pm)
Guess that's what happens when you have Honda techs working on Fords. Glad everything worked out.
Sep 19, 2007 (5:04 pm)
Hello eveyone newbie here needing some help. I replaced all the brakes, bleed, and re-bleed. The Brakes worked fine for about a week then NO BRAKES!!!! Well at least till I get all the way down on it. If I have to slam on brakes they go all the way down and start to grab hard and let go grab hard and let go(I thought I was going to nail the car in front of me). Anyway HELP ME Please!!!
#22 of 165 Re: 97 Brake problems [joshnaugusta]
Sep 19, 2007 (11:39 pm)
My guess - you got air in the ABS system/pump.
And the 'regular' bleeding procedures of opening the bleeders on each wheel will not do it.
I'm afraid this is not a do-it-yourself procedure. You are going to have to take this to the dealer or a brake shop.
#23 of 165 '90 ranger front brakes stuck on
Apr 16, 2007 (9:27 pm)
#24 of 165 '90 ranger front brakes stuck on
Mar 14, 2007 (7:33 am)
i have a'90 ranger 2.9L v-6, my brake light and RABS light have always been on but i didn't notice a problem. now my front brakes are locked on, any idea how to fix this?
#25 of 165 1990 ford ranger 2.9 calipers sticking
Mar 14, 2007 (8:55 pm)
ok i can compress my calipers and drive my truck but as soon as i hit the brakes they stay, autozone told me that the rubber lines is the problem so i replaced them same problem. ? are my calipers bad? i can compress them with no problem, is it air in the line or could there be a hole in my lines somewhere else please i need help its all i have right now thanks
#26 of 165 Re: 1990 ford ranger 2.9 calipers sticking [fordgreg]
Apr 16, 2007 (9:14 pm)
bad caliper same thing happened to me. i replaced caliper and they worked fine. The piston in the caliper is all messed up cant do much but replace it
#27 of 165 Re: 1990 ford ranger 2.9 calipers sticking [kiyochan1113]
Apr 16, 2007 (9:27 pm)