- #29 of 97
-
2001 300M Stereo Problems
by thepaj
-
Apr 13, 2007 (9:59 am)
-
|
Hi,
I just bought a 2001 300M, and I love it. However, I was putting CD's into the player and the whole stereo is frozen and reads 1SEL. the 1SEL stays on even after I have taken the keys out of the ignition.... Any advice out there.
thanks,
The Paj
|
- #30 of 97
-
Re: 2001 300M Stereo Problems [thepaj]
by tayl0rd
-
Apr 16, 2007 (5:12 am)
-
|
|
Replying to: thepaj (Apr 13, 2007 9:59 am)
It's stuck in Driver Memory Selection mode for some reason. Press #2 on the seat memory button and see what happens. Then press #1 again.
|
- #31 of 97
-
1999 Chrysler 300M door speakers are not working
by mike23b
-
May 01, 2007 (4:18 am)
-
|
|
i just bought a 1999 Chrysler 300M and the door speakers don't work on either door all small speakers are working does anyone no what the problem could be
|
- #32 of 97
-
Re: 1999 Chrysler 300M door speakers are not working [mike23b]
by tayl0rd
-
May 01, 2007 (6:38 am)
-
|
|
Replying to: mike23b (May 01, 2007 4:18 am)
The speakers are either not there, or they're disconnected.
|
- #33 of 97
-
how to reconnect speakers
by mike23b
-
May 01, 2007 (6:45 am)
-
|
I check the speakers are there so could you tell me how to check and see if there just disconnected. 
|
- #34 of 97
-
Re: how to reconnect speakers [mike23b]
by tayl0rd
-
May 01, 2007 (6:48 am)
-
|
|
Replying to: mike23b (May 01, 2007 6:45 am)
Take them out and see if their plugged in at the back of the speaker. The grille just pulls right off, but you might have to use something to pry it loose first. After that, I believe there are 3 screws holding the speaker in. Unscrew those and pull the speaker out.
|
- #35 of 97
-
Re: how to reconnect speakers [tayl0rd]
by mike23b
-
May 01, 2007 (7:39 am)
-
|
|
Replying to: tayl0rd (May 01, 2007 6:48 am)
There hooked up in the back of speaker but still not working any other solutions
|
- #36 of 97
-
300M No Sound
by 300mr
-
Jul 12, 2007 (7:54 am)
-
|
|
Replying to: mike23b (May 01, 2007 7:39 am)
I just pickup up a 2000 300M. It has an after market Sony Stereo, and has the wiring harness adapters. So I went ahead and hooked up my JVC CD stereo. All the lights are on but no sound. I checked everything, nothing worked. So I put the old stereo back in and now that has the same symptoms, no sound. Is there an AMP is these cars that I need to reset or a fuse for it? Any advice would help. Just as a note I'm a DIY type of guy and have installed many stereos. All wires are color coded and with the after market wiring harness it makes things even easier.
|
- #37 of 97
-
Re: 300M No Sound [300mr]
by tayl0rd
-
Jul 12, 2007 (8:07 am)
-
|
|
Replying to: 300mr (Jul 12, 2007 7:54 am)
Yes, there is a factory amp in the truck on the passenger side behind the liner. Sounds like the previous owner may have taken out his aftermarket amp which had been routed to the speakers.
|
![[F]](http://a332.g.akamai.net/f/332/936/12h/www.edmunds.com/media/townhall/webxicons/site.gif){kind=small}
Forums
Sedans 
