Chevrolet Malibu Brakes

78 messages,  Last post on Jan 26, 2012 at 2:50 PM

You are in the Chevrolet Malibu Forum.

What is this discussion about? Chevrolet Malibu, Chevrolet Malibu SS, Brakes, Sedan

#70 of 78 Re: broken parking break???? [atxmalibu41] by pao

Feb 14, 2011 (7:01 am)

Replying to: atxmalibu41 (Feb 09, 2011 1:19 pm)
my bet is you broke the parking brake cable....the car should be safe...just no parking brakes.....

#71 of 78 Re: Squealing brakes on 04 Maxx [beedublu] by maddog0324

Feb 15, 2011 (4:23 am)

Replying to: beedublu (Dec 19, 2010 7:33 pm)
The noise is from the rapid (but slight) movement of the brake pad backing plates when you apply your brakes. Whoever did your brake job didn't use "brake quiet" material (available where auto parts are sold) on the back-side of the pad's backing plates.

#72 of 78 Re: Malibu Maxx brake issues [beffybeans] by jasonctemp

Sep 13, 2011 (10:03 am)

Replying to: beffybeans (Aug 01, 2010 10:18 am)
I'm having the exact same problem. What was the fix? Thanks so much for any help you can give!

#73 of 78 Re: Malibu Maxx brake issues [maddmaxx2] by jasonctemp

Sep 13, 2011 (10:04 am)

Replying to: maddmaxx2 (Jan 28, 2010 12:29 pm)
What was the fix for this? I am having the exact same issue. Any help is greatly appreciated!

#74 of 78 Re: Malibu Maxx brake issues [jasonctemp] by beffybeans

Sep 13, 2011 (11:19 am)

Replying to: jasonctemp (Sep 13, 2011 10:04 am)
For my car, it was the Master Cylinder that needed to be replaced. I took it for a few estimates, and it was right around $1200 to be fixed. Each mechanic said that they see this problem all the time on Malibus. In fact, there was one in the shop getting that same problem fixed at the last place I went to! Anyway, I ended up taking that $1200 and put it towards the down payment on a new car. I was fed up with putting money into something that seemed to continue to have problems. Good luck with your situation. Maybe it will turn out better for you then it did for me!

#75 of 78 Re: Malibu Maxx brake issues [jasonctemp] by ChevyMax

Sep 13, 2011 (3:36 pm)

Replying to: jasonctemp (Sep 13, 2011 10:03 am)
We had the master cylinder replaced, and hoses flushed, we took it to a reputable Chevy dealer to have the work done. This was done over one year ago and since then, no problems. It was well worth having it done; now I love my car.

#76 of 78 Re: Knocking When Braking [josephus] by cdownes1

Dec 06, 2011 (2:30 pm)

Replying to: josephus (Oct 31, 2006 7:51 am)
hey josephus just wondering if you got an answer to this problem because i've got the same problem and can't get any answers.

#77 of 78 Re: Malibu Maxx brake issues [ChevyMax] by jasonctemp

Jan 26, 2012 (11:23 am)

Replying to: ChevyMax (Sep 13, 2011 3:36 pm)
I had trouble finding this thread again! Thanks for replying! I am still dealing with the issue! I just took it to a chevy dealer against my better judgement today! They are saying the brake fluid is contaminated and I need a new master cylinder ABS module and brake flush. Sounds like what you had done minus the ABS. I was only taking my car to one shop so I am investigating how the fluid was contaminated before going forward.

#78 of 78 Re: Malibu Maxx brake issues [jasonctemp] by pao

Jan 26, 2012 (2:50 pm)

Replying to: jasonctemp (Jan 26, 2012 11:23 am)
sounds like an ABS issue with knocking thru the floorboard ......
To POST a message, please Sign In.

Advertisement

Browse by Category

Browse by Vehicle
   View All Vehicles

Browse by Board
Browse by Topic
View All Topics

Edmunds Community

Advertisement