Last post on Sep 04, 2008 at 12:46 PM
You are in the Chevrolet Impala
What is this discussion about?
Chevrolet Impala, Brakes, Sedan
#27 of 31 Re: 2003 Chevy Impala brake issues... [muggelberg]
May 02, 2008 (7:48 pm)
And tighten them in proper order, 1 - 3 - 5 - 2 - 4.
My repair manual states 100 ft-lbs of torque.
#28 of 31 Re: 2003 Chevy Impala brake issues... [lostwrench]
May 03, 2008 (11:33 am)
I have done everything per the service manual. I starting to think it might be a busted belt in the tire.. I'm going to check into that now.
#29 of 31 Re: 2003 Chevy Impala brake issues... [muggelberg]
May 20, 2008 (6:56 pm)
I had the same problem with an 04 and found the metal on the back rotors was peeling off and the pulsation was due to missing metal on the rotors. Replaced rear pads and rotors and stops smooth. They were the factory rotors that were falling apart.
#30 of 31 04 Impala Brake Clicking
Jun 09, 2008 (4:35 pm)
Had new brakes put on the car all the way around. After about 500 miles of driving, I started hearing a "clicking" noise when the brakes were applied slowly. This did not happen when quickly applying the brakes. Took the car back to the mechanic, they turned the rotors which did not fix the problem. They replaced all 4 brake pads and the "clicking" stopped until the car was driven about 500 miles again. Also, as I stop slowly, there seems to be a squeaking noise.
#31 of 31 Re: body slide after parking [tcs012]
Sep 04, 2008 (12:46 pm)
I have a 2007 Impala and I thought the same thing. I thought it was just me. It moves to the extent if I were to park too close to a car in front of me, I would hit it if I took my foot off the brake. I could see someone or something getting squished if it were between the two vehicles.