- #542 of 589
-
Re: problem with hot weather start [diamond25]
by spriest
-
Aug 06, 2009 (5:23 am)
-
|
|
Replying to: diamond25 (Aug 03, 2009 4:10 am)
Not a clue. still working the issue. b/c it's hard to duplicate the problem at will, it's hard to narrow down.
|
- #543 of 589
-
Re: Won't Start [knick31]
by dayneseditz
-
Aug 12, 2009 (5:11 am)
-
|
|
Replying to: knick31 (Aug 02, 2007 8:49 pm)
body control modgle i can spell but i just had the same problem it in the pass side kick panel
|
- #544 of 589
-
96 Jeep Grand Cherokee stalling out on me..
by jygriff1
-
Aug 14, 2009 (9:00 pm)
-
|
|
I have a 96 Jeep Grand Cherokee Laredo, well recently in the mornings after starting and driving to my first stop or red light when stopped and waiting the Jeep will die. After putting it in Park it starts back up and then I drive it down the road a few miles and it doesnt happen again. All through the day it doesnt happen again. If it sits for overnight or for several hours, the first start and drive is when it seems to happen. I thought it might be just water in the tank or fuel line but have ruled this out. Any suggestions would be helpful. Thanks
|
- #545 of 589
-
Re: 96 Jeep Grand Cherokee stalling out on me.. [jygriff1]
by finisher
-
Aug 15, 2009 (6:08 am)
-
|
|
Replying to: jygriff1 (Aug 14, 2009 9:00 pm)
My 1996 4.0 Grand Cherokee had an intermitnet hesitation while driving at freeway speeds. Never completely stalled. Installed a new craknshaft position sensor and that cured the problem. A couple of months later it would have a hard time starting and run poorly until it would not start at all. Installed a new fuel pump assembly and that took care of the problem. Fuel pump assembly is expensive because it includes fuel gauge sensor and other stuff. Around $425.00 for the part. Another stupid design. Good luck.
|
- #546 of 589
-
Re: 96 Jeep Grand Cherokee stalling out on me.. [finisher]
by mamma
-
Aug 15, 2009 (7:57 am)
-
|
|
Replying to: finisher (Aug 15, 2009 6:08 am)
You should look up the word stalling, rough idle. There have been many threads; one of which includes the possibility of needing a new computer becuase of some improper bolt wear. The new computer solved mine, not for cheap, though.
|
- #547 of 589
-
Re: 1996 Jeep GC will not run [harpplaya]
by murfdog13
-
Aug 16, 2009 (7:58 am)
-
|
|
Replying to: harpplaya (Jun 04, 2009 12:37 pm)
hey buddy im experiencing the same problem with my 96jgc i changed my starter purchased a new battery now the gauges dont work and the engine wont turn over so was it the ignition switched that was causing yout the problem
|
- #548 of 589
-
Re: 1996 Jeep GC will not run [murfdog13]
by 96jeep2
-
Aug 16, 2009 (6:06 pm)
-
|
|
Replying to: murfdog13 (Aug 16, 2009 7:58 am)
Looks like alot of us are having the same issue, anything from not starting all the way up to stalling while towing a boat 15 mins down the high way. This is absolutely absurd!!! I have changed everything in my car and I still can't get it started, maybee the goverment should have let Chrysler fall right on it's face, just like chrysler is letting their customers do. I dont think it's any of the sensor's, pumps, hose, fuse or switches ; I think it is the whole wiring harnes it self! It has to be, we replace every sensor, switch, hose, fuse, and the pcm! If we replaced everything its got to be what connects of of them together. Jeep is known for, not have a great electrical system to begin with. I dont know I am not a mechanic, but I do have a brain. Oh were was that brain of mine when I started this crap!! LOL any ways. I spent way to much money on this, At this point is would be foolish to give up. Any one know were I can get a new wiring harnes, that hopefully dose not coast an arm and a leg, i only have a few fingers left.
|
- #549 of 589
-
Re: problem with hot weather start [jnunez]
by deratristar
-
Aug 25, 2009 (1:54 pm)
-
|
|
Replying to: jnunez (Jul 19, 2007 4:04 pm)
You are describing a problem that has plagued me for 3 years! Mine is an auto trans, but I get the same misfire code from the OBD II. Runs better after a few seconds in drive. Changed the plugs, and was going to change the coil boot, then the coil pack until I saw your post.
Anyone come up with a solution for this yet?
|
- #550 of 589
-
starting problems
by tomstrate
-
Sep 06, 2009 (6:04 pm)
-
|
|
hey guys,,new to site,,,just purchased 1996 4.0 jgc 2wd,,had cracked exaust man, so i replaced with new one ,,must have missed something,now i have to hold the gas pedal to the floor to get started and idles rough for a few mins,,also needs a few pumps of petal to keep running ,,then levels out ,,just wandering if i didnt hook something up in the right place,,thanks
|
![[F]](http://a332.g.akamai.net/f/332/936/12h/www.edmunds.com/media/townhall/webxicons/site.gif){kind=small}
Forums
SUVs 
