Sign In Join 



Jeep Grand Cherokee Start Stall Idle Problems

589 messages,  Last post on Nov 26, 2009 at 4:03 PM

You are in the Jeep Cherokee and Jeep Grand Cherokee Forum. Your Hosts are steve_ & tidester

What is this discussion about? Jeep Grand Cherokee


Messages Page 54 of 60
1
...
51
52
53
54
55
56
57
...
60
Prev
Next
Last
Go To Msg #
Search This Discussion

#526 of 589
Re: 2004 Jeep Grand Cherokee Starting Problem [osornio] by ihornsby
Jun 03, 2009 (6:58 am)
Reply

Replying to: osornio (Apr 28, 2009 8:02 am)

I have the same issue with my 01 Grand Cherokee. Did you ever figure out what is causing This?
Thx
#527 of 589
Bad shaking when in drive but stopped by lndancy84
Jun 03, 2009 (10:45 am)
Reply
Ok here is the deal.. I was driving my 2002 JGC to Fl which is about a 5 hr drive from where I live. It is a lot of stopping and going. But after about 4 hours when we would get to a red light it was shaking bad when we were stopped. Now 2 weeks later it is still doing it. We thought maybe we had gotten bad gas. that wasnt the case. If you put it in N while stopped at a red light it is fine it doesnt shake. Also when you start to pull off from the light it hesitates. Please help me!! I just spent 536.00 on a thermometer and a radiator fan.. I would like to come out as cheap as possible.
#528 of 589
Re: Bad shaking when in drive but stopped [lndancy84] by cherokeebaby
Jun 03, 2009 (4:59 pm)
Reply

Replying to: lndancy84 (Jun 03, 2009 10:45 am)

I'm having the same trouble with my 2004 JGC. My malfunction light has been on and all of the sudden when I was just about to work on Monday, it was shaking badly and that light started blinking. I have had a mechanic look at it and he thinks its something with my computer. That sounds like an awfully costly job to fix. I'm wondering if it could be a sensor or something with the emissions. I need to fix this as soon as possible. I'm afraid to drive it and don't think I can get it back to my house as I work a half hour away from home. Any help will be greatly appreciated.
#529 of 589
Re: 01 Grand Cherokee ignition issues [ihornsby] by ihornsby
Jun 04, 2009 (4:43 am)
Reply

Replying to: ihornsby (Jun 03, 2009 3:39 am)

After Further checking, I am hearing a click sound when it trys to start. So I am thinking maybe a bad starter. i will change it out this weekend.
#530 of 589
Re: 1996 Jeep GC will not run [jeepercreepe] by harpplaya
Jun 04, 2009 (12:37 pm)
Reply

Replying to: jeepercreepe (Mar 22, 2009 10:36 am)

Hey Buddy,
Did you ever figure out what the problem was? I have the exact same problem with my 96 GC 4.0 six. 191000 miles. Mine stopped in the middle of a 4 hour trip by the side of the highway though!
  
To the response from tuggajb, my fuses are straight, would the ignition switch kill the vehicle and the guages while running down the highway?
 
Thanks for any help all.
#531 of 589
Re: 01 Grand Cherokee ignition issues [ihornsby] by ihornsby
Jun 08, 2009 (4:05 am)
Reply

Replying to: ihornsby (Jun 03, 2009 3:39 am)

Ok, It ended up being a loose connection on the starter i guess, I took the starter off to be tested and it tested fine, i cleaned all connections and put the starter back on, its working fine.
#532 of 589
Re: cold start stalling problem [dlunge] by eric784254
Jun 16, 2009 (10:43 am)
Reply

Replying to: dlunge (Nov 26, 2007 7:20 pm)

was looking at my haynes manual & i dont see a mat sensor, i found a map sensor which is located on the side right hand side of the throttle body (facing front of vehicle. do you have the inline 6 cylinder ? what manual do you have ? mine is 93 -04 haynes manual #50025
#533 of 589
Re: 1996 JGC hard-start & stalls while driving [sarwarrior] by eric784254
Jun 16, 2009 (10:59 am)
Reply

Replying to: sarwarrior (Nov 08, 2006 4:09 pm)

did you check for fuel pressure ? you might have a vacuum leak also. try your plug gap .035 is whats recommended i think. refer to your label in front of the the radiator or call your local parts supplier for info.
#534 of 589
Re: HELP!!! 96 Country won't start [ElTejano] by eric784254
Jun 16, 2009 (11:01 am)
Reply

Replying to: ElTejano (Dec 06, 2008 3:13 pm)

check your battery temp sensor, i think it located under the battery in the tray
#535 of 589
Re: 94 JGC Starting, Idle and running problems [lewisj] by eric784254
Jun 22, 2009 (1:02 pm)
Reply

Replying to: lewisj (Jun 02, 2009 6:36 pm)

im having some similar problems with my 98 jgc, rough idle no codes. chased wires, replaced sensors. no codes. called a junk yard, told me 25 if i pull the part. skeptical about electrical parts from a junk yard though, but its my only choice. the pcm is on the firewall on the passenger side right ? could you tell me what it looks like ? my wife wants me to sell it but im not givin up on it yet ! i would like to solve this prob before i loose my mind. she doesnt know it yet, but if i can solve this puzzle, im givin it to her for her b-day. dazed & confused for now. any help would be greatly appreciated. thanks.

Messages Page 54 of 60
1
...
51
52
53
54
55
56
57
...
60
Prev
Next
Last
Go To Msg #
Search This Discussion
To POST a message, please Sign In.

New? Join Now!

Forum Tools

Please sign in.
Email Address:

Password:

Forgot Password?

Search Forums

Enter Keyword(s)

Advanced Search

Browse by Vehicle



View All Vehicles
Advertisement
Ask the Community
See What People Are Asking

Browse by Board

Browse by Topic


View All Topics

Today's Chats

Advertisement