You are here:
Forums
Pickups
Chevrolet Colorado and GMC Canyon
Chevy Colorado and GMC Canyon Owner Experiences

75 messages, Last post on Mar 13, 2009 at 5:19 PM
You are in the Chevrolet Colorado and GMC Canyon Forum. Your Host is kcram
|
Replying to: dmathews3 (Jun 07, 2008 1:33 pm) |
|
|
Replying to: nvbanker (Jun 07, 2008 1:25 pm)
|
|
|
Replying to: poncho167 (Jun 08, 2008 5:04 am)
|
|
|
Replying to: nvbanker (Jun 08, 2008 9:30 am) My only gripe so far, with my Canyon, has been interior wind noise, mostly at the rear pillar (short cab). It seems to be some glitch in the design or location of the cab vents. I've applied a lot of the "competition style" sound deadener to the cab, and have quieted it down a fair amount. However, when the wind hits the truck just right, it's downright annoying inside the cab, right at ear level. In that respect, I liked the S-10 much better. |
|
|
I have a 2006 Colorado, with 55000 km. Not only do I have paint issues, I have replaced my head light bulbs twice, my licience plate blubs, and my brake light bulbs! Obviously there is a grounding issue. Now the emergency brake sticks on when the release is pulled. I took it in to the dealership where I bought it, (Paul Sadlon Motors-Barrie,Ontario,Canada) and the service department won't even look at it without charging me an arm and a leg. With all the issues that these trucks are having and the shitty service that you will recieve at the dealership I would not recomend that anyone buy a Chevrolet. This dealership has left a very bad taste in my mouth, and this will be the last Chev that I will ever buy!
|
|
|
Replying to: moe25 (Nov 04, 2008 6:24 am) |
|
|
|
| took my 06 canyon to gm dealer for winter tire change over and to get a wheel alignment done as truck was pulling to the left , dealer called cannot do alignment as the cam that is used for doing adjustments was cracked , covered by warennty anyone else having experienced this problem | |
| What kind of performance increase could I expect with the instalation of a catback exaust and a K&N cold box on a 2.9 2009 canyon. Ken | |
|
Replying to: jhknight (Dec 15, 2006 5:48 pm)
|
|
|
|
Are the front rotors on 2005 Canyon pressed on ?Any information on removing the rotors will be greatly appreciated.
|
|
You are here:
Forums
Pickups
Chevrolet Colorado and GMC Canyon
Chevy Colorado and GMC Canyon Owner Experiences
New? Join Now!
Forum Tools
Search Forums
Browse by Vehicle
2010 Chevrolet Colorado
2010 GMC Canyon



Browse by Board
Browse by Topic
Today's Chats