You are here:
Forums
Pickups
Chevrolet Colorado and GMC Canyon
Chevy Colorado and GMC Canyon Owner Experiences

79 messages, Last post on Dec 01, 2009 at 5:38 AM
You are in the Chevrolet Colorado and GMC Canyon Forum. Your Host is kcram
|
|
|---|---|
|
My window and locks are now working! Let me share my experience, maybe it will save someone else some frustration. Based on everything I have read online I do believe that my dog was holding down the lock button until the on board computer shut down the circuit as it is designed to do. I waited most of the day and it still was not working. I tried all the advice I read; I checked the fuse box, I unscrewed the control board from the arm rest, disconnected the wires and plugged them back in securely. Nothing! I removed them again and applied the electrical grease as someone suggested. Nothing! I disconnected the battery as someone suggested. Nothing! The last thing I tried made no sense to me but I did it anyway, I removed the control panel, disconnected the wires, removed the screws that hold the circuit board in place and removed it. The way it is constructed prevents anything getting held down incorrectly, nothing was out of place, it is very simple and straightforward. Anyone who removes this will see how simple it is and that there is no way it could be damaged by holding down one, two or all the buttons at once for a hundred and fifty years straight. Yet, when I put it back together the window and locks worked! I would have been happier if it just blew a fuse. We can all be thankful GM doesn't build airliners. |
|
Anyone know if you can put a car seat in an extended cab? Would only need it in a pinch. Is it safe or even possible?
|
|
I have encountered the drivers window, keyless entry problem as well about 5-6 times. dealer can't seem to do anything about it, had a problem with my heat/cool fan quiting on me. My front right blinker goes out about every month. Brake lights stopped working(before the recall on the brake light switch). So they said they would fix it but i had to leave the truck in so they can take it out order a switch and wait for it to come in, even though they had one in stock. they said that on warrenty stuff the part has to be ordered. so i just bought the $10 part and put in my self. Some more little electrical problems as well, like some radio lights don't work, heater lights don't work. Last time i buy a Chevy or even American. Oh and you can fit a car seat in the back of a extended cab but not a baby seat, more like a toddler seat. It is very tight and might depend on the seat also. There are anchors for them.
|
|
|
Replying to: iccoleman (Jan 08, 2008 7:19 am) |
|
|
Replying to: iccoleman (Jan 08, 2008 7:19 am) |
|
|
Replying to: mike2250 (Nov 05, 2006 1:22 pm)
|
|
|
Replying to: simplyme (Feb 03, 2008 4:29 pm) |
|
| My 04 Colorado has 81,000 and the door lock and drivers window problem has been an issue with me now for a few months. I just today searched the internet and came to this site today. Sounds like a recall is needed here. I too popped of the drivers door armrest, removed and reattached the connectors and it worked too. We shall see. Thanks for all the advice too. | |
|
|
I have a 2007 SLE 4wd. The problem is when it is in 4wd Hi, the front axle binds tighter the more I turn the steering wheel. At full right or left it is almost bound tight. The more throttle I apply, the more it bucks and kicks. Is this normal? It has a small lift and somewhat larger tires but it is all factory. BTW I average 21 mpg in town and 26 on the hiway. Lots of power, (240 hp IL5), good torque, and comfortable. Love the truck, but would like to solve this problem.
|
|
|
Replying to: garebear55 (Feb 15, 2008 9:45 pm) |
|
You are here:
Forums
Pickups
Chevrolet Colorado and GMC Canyon
Chevy Colorado and GMC Canyon Owner Experiences
New? Join Now!
Forum Tools
Search Forums
Browse by Vehicle
2010 Chevrolet Colorado
2010 GMC Canyon



Browse by Board
Browse by Topic
Today's Chats