- #25 of 75
-
Re: Bed to Cab alignment [islandcorner]
by leadfoot4
-
Jan 23, 2007 (3:24 am)
-
|
|
Replying to: islandcorner (Jan 22, 2007 8:34 pm)
Island, I understand what you're saying, but keep one thing in mind. If your cab is inherently loud due to wind noise, and you crank the stereo to drown it out, you've created a really loud environment. Over the long term, this could cause hearing damage. Secondly, you may not hear warnings from car horns, emergency sirens, etc.
Don't worry, I'm not a panic inducing freak, but I worked around loud equipment at my job for a long time, and as a result, I now live with continual "ringing" in my ears. It's subtle, but it's still there.
That being said, I also enjoy a good sound system, both at home and in the car/truck. I was considering upgrading the setup in my Canyon, but until I can get the cab noise level down a little more, I don't consider it a worthwhile modification.
|
- #26 of 75
-
Re: Bed to Cab alignment [leadfoot4]
by mike2250
-
Jan 23, 2007 (6:36 am)
-
|
|
Replying to: leadfoot4 (Jan 23, 2007 3:24 am)
Having tried all that you have, I would begin to wonder if it isn't the glass or body gap issue. I would hate to make more work for you; but first you could have a friend in the truck listening to see if they can pinpoint the source of the sound. Once found the fix ought to be easier. Chasing these things is brutal. I had a screeching sound like a brake dragging. It took me months to find the cause and 15 minutes to fix it. So it goes when you expect a $25,000 vehicle to perform like one.
|
- #27 of 75
-
Re: 2004 Colorado remote lock problem, Please Help [chuck1234]
by mike2250
-
Jan 29, 2007 (7:56 am)
-
|
|
Replying to: chuck1234 (Jan 11, 2007 7:39 pm)
Well I just got back from the dealer for this problem; apparently there are many Colorados with this problem but no GM fix.
1. check all fuses.
2. remove driver's side control panel and check that all of the plugs are tightly in place.( this was my problem.
3. According to the Colorado Owners list, the final repair is to replace the control panel with part# 15141484.
Although this an intermittent problem and mine started workin g again on the way to the dealer (naturally), the tech got it to stop working again by driving over a bumpy road. It was his guess that repalcing the control panel simply resulted in properly attaching the connectors. They are holding a new control panel for me just in case. I hope this is the cure, I'll let you know. I hope you find this helpful. Mike
|
- #28 of 75
-
Re: Bed to Cab alignment [mike2250]
by leadfoot4
-
Feb 02, 2007 (2:52 am)
-
|
|
Replying to: mike2250 (Jan 23, 2007 6:36 am)
Mike, I appreciate what you're saying, however there doesn't seem to be any single source for the noise. It just seems to be a general wind "roar" from air hitting the back window at speed.
One of my co-worker's fathers has a Colorado similar to mine, and he's driven it several times. He recently rode in my Canyon and commented on how much quieter my truck was. Personally, I think I've done all I can, and the source is actually the shape of the rear pillars of the truck, which are creating some sort of turbulence.
I've spoken with a couple of people who have the extended, or crew cabs, and they don't hear the noise that I do. This reaffirms, in my mind anyway, that it's realted to the rear pillar, and since the longer cabs place the driver further away from it, it isn't as noticible.
|
- #29 of 75
-
Re: 2004 Colorado remote lock problem, Please Help [giz5220]
by delawhere1
-
Feb 19, 2007 (4:33 pm)
-
|
|
Replying to: giz5220 (Dec 05, 2006 9:41 am)
Starting to sound like a broken record, but I have experienced the same thing twice in my '06 LT Crew cab. Problem is intermittent, with driver's window not working and power locks shutting down altogether. It seems to correspond to cold, wet weather, and the problem disappears after a couple of hours of driving. Doesn't look the problem has been fixed in later model years.
|
- #30 of 75
-
Re: 2004 Colorado remote lock problem, Please Help [delawhere1]
by mike2250
-
Feb 19, 2007 (5:34 pm)
-
|
|
Replying to: delawhere1 (Feb 19, 2007 4:33 pm)
I recently posted about my experience with the same problem, Here in Florida we don't have cold weather so I knew it had to be something else. I took it back to my dealer who actually has a service department that doesn't let phantom problems go. The mechanic who worked on the truck told me it primarily happens on crew cabs and is aresult of the electrical clips on the bottom of the control module not being properly locked place. Repeated slamming the door and riding over bumps dislodge and then intermintedly cause the problem. He properly reattached the power plugs after applying dielectric grease to the contacts. So far so good.
|
- #31 of 75
-
Re: Bed to Cab alignment [msc43283]
by endent
-
Feb 28, 2007 (7:36 am)
-
|
|
Replying to: msc43283 (Jan 13, 2007 7:14 pm)
You should have them make an attempt to fix it. I didn't have them look at mine for the reason that you suggest and now I regret it. There may be some other things down the road that they won't do anything about, others that won't completely get fixed and there are always the ones that they know about but won't tell you about unless you describe it properly. So I say have them fix anything you find. Mine has been at the dealer going on three weeks now and they haven't had an opportunity to start it cold to check for one of the several problems that I took it in for. It has been sitting outside most of the time though, waiting for the next round of parts that GM authorizes.
GMCCanyon.info
|
- #32 of 75
-
Re: 2004 Colorado remote lock problem, Please Help [giz5220]
by jimmyjamjim
-
Mar 14, 2007 (2:05 pm)
-
|
|
Replying to: giz5220 (Dec 05, 2006 9:41 am)
I have a 2004 Colorado with what I think is the same problems with the power locks and windows. In February of 2006 the remote locking system, the power locks, and the driver's side power window stopped working out of the blue. It was a nice sunny day I recall. The passenger power window continued to work; and so did the power side view mirror controls. Later in the day, out of the blue, the power locks and windows returned to their proper function. I took it directly to the dealer. They checked the driver's side control panel, the wiring, and the connections. They test drove the vehicle; and couldn't replicate the problem. They told me to bring my Colorado in while the problem was occurring so they could hook it to their diagnostic equipment. The problem re-occurred again in January 0f 2007. Two times in January the problems went away while I was in the service bay waiting for service. One of those times they went through the same diagnostic procedures they had gone through the previous February. The same problems re-occurred this week. I printed all the comments from this website to show them. This time the problems went away after they had started checking the vehicle out. They then contacted GM for help. They found something on the GM website that seemed to reference a similar problem. The reference was PIT3164A (10/17/2006). GM said power window fuse #42 was causing the power locks and windows not to function. The vehicle commuter was sensing a overload to fuse #42's circuit and shut down the power lock and power window system functions before fuse #42 actually blew. They said the overload was occurring when both power window controls were used at they same time, or the power window and the power lock controls were pressed at the same time. GM said the controls would start working properly once the on-board computer sensed the cooling of the circuit or the nonexistence of an overload. They told the dealers not to attempt repairs, but to tell the vehicles owners to modify their behavior. I have my doubts because I don't do what they say causes the problem. The problems goes away long after the circuit has cooled down. The dealer said they would contact GM with my problem. The dealer guessed the problem might require some re-programing by GM of the on-board computer. They said they would contact me once GM got back with them with a solution. I am not confident. They might have isolated the circuitry problem; but not the proper cause of those problems.
|
- #33 of 75
-
Ghost locks and window
by mike2250
-
Mar 15, 2007 (4:56 am)
-
|
I understand what GM told the dealer but why do nothing. Either refresh the BCM to recailebrate when the fuse results become a factor or simply up the amps on the fuse.
Really how many people ride around pushing both buttons at the same time. If you think about it, it would be hard to do. I have to say since my dealer removed the electrical connections and re-greased them, I haven't the problem re-occur. Good luck and hopefully this problem will get resolved with-in our lifetime.
|
- #34 of 75
-
Ghost locks & driver side window
by iball1
-
Mar 16, 2007 (10:17 am)
-
|
|
Just figured I'd let you all know that I am another '04 Crew Cab owner who just experienced the same issue. I appreciate your input here, hopefully it will help my dealer zero in on the solution quicker. Hopefully GM will take notice of the pattern.
|
![[F]](http://a332.g.akamai.net/f/332/936/12h/www.edmunds.com/media/townhall/webxicons/site.gif){kind=small}
Forums
Pickups 
