You are here: Forums Pickups Chevrolet Colorado and GMC Canyon Chevy Colorado and GMC Canyon Transmission Problems

Chevy Colorado and GMC Canyon Transmission Problems

24 messages,  Last post on Oct 29, 2009 at 12:52 PM

You are in the Chevrolet Colorado and GMC Canyon Forum. Your Host is kcram

What is this discussion about? Chevrolet Colorado, GMC Canyon, Transmission, Truck

Messages Page 3 of 3 1 2 3 Prev Next Last

Go To Msg # Search This Discussion

#20 of 24 Automatic transmission only shifts through the gears if you start in 1st? by molder1979 Oct 17, 2009 (3:57 pm)
My company truck only shifts through the four speed automatic transmission (2.8L 2wd 2004) gears if you start in first and shift manually through 2nd, 3rd, D. If you start in drive it just revs up as if you were in N. Has torqe in first and second but you cant move from a stop if you put it into drive or third. Does anyone know of this problem? Transmission bad or did something fall apart? Please help! I am going to the junk yard next weekend and going to change the transmission. It would not be much fun if its all for nothing. Replies to this message: dmathews3 (Oct 17, 2009 5:31 pm) kaq (Oct 29, 2009 12:52 pm)
#21 of 24 Re: Automatic transmission only shifts through the gears if you start in 1st? [molder1979] by dmathews3 Oct 17, 2009 (5:31 pm)
Replying to: molder1979 (Oct 17, 2009 3:57 pm) could the linkage be at fault? Seems funny it works properly if you start out in low and then manually shift through the gears. Starting in D should do the samething thats why I wonder if putting it in drive first where as the linkage is just a little off. Have you tried putting it in low, then 2nd, 3rd and then drive while still stopped and then try and go in D. If this works I would guess it is the linkage out of wack. Try it and report back. Replies to this message: kaq (Oct 29, 2009 12:52 pm)
#22 of 24 2005 Tranny Problems by kaq Oct 29, 2009 (10:38 am)
I have a 2005 port LS I5 with auto tranny that just started slipping today! It only has 48K on it and I am baffled. Well taken care of.   As for what I call the the reverse gear hesitation clunk, it happens too and dealer service rep told me "thats normal for this model"   Sucks as the truck is off warranty now............
#24 of 24 Re: Automatic transmission only shifts through the gears if you start in 1st? [dmathews3] by kaq Oct 29, 2009 (12:52 pm)
I must have stopped and turned the truck off five times to make it 2 miles home today! They really hated me at that stop light! Hehehe

Messages Page 3 of 3 1 2 3 Prev Next Last

Go To Msg # Search This Discussion

You are here: Forums Pickups Chevrolet Colorado and GMC Canyon Chevy Colorado and GMC Canyon Transmission Problems