204 messages,
Last post on Jan 18, 2013 at 12:56 PM
You are in the
Pontiac Grand Prix Forum.
What is this discussion about?
Pontiac Grand Prix, Car Safety, Sedan
#2 of 204 Traction/Stability/ABS Service!
by mcp6530
Jun 05, 2006 (1:58 pm)
All at once, each of those systems is out and needs service. Anyone hear this problem or have this problem with their GXP? Mine is an 05 with 14k miles.
#3 of 204 Re: Traction/Stability/ABS Service! [mcp6530]
by rmozol
Jun 05, 2006 (9:13 pm)
That happened to me on one that I test drove off the lot. The calipers looked pretty rusty, so I'm guessing it was related.
#4 of 204 Re: Traction/Stability/ABS Service! [mcp6530]
by bubbaman999
Jun 11, 2006 (6:05 am)
Marc,
I saw this at the nhsta TSB site. Does this sound like it?
Hope it helps,
Gary
Make : PONTIAC Model : GRAND PRIX Year : 2006
Manufacturer : GENERAL MOTORS CORP.
Service Bulletin Num : 050525009 Date of Bulletin: OCT 01, 2005
NHTSA Item Number: 10017755
Component: SERVICE BRAKES, HYDRAULIC:ANTILOCK
Summary:
BRAKE SYSTEM LIGHT ON, ANTILOCK BRAKE SYSTEM (ABS) LIGHT ON, TRACTION CONTROL LIGHT ON, SERVICE BRAKE/ABS/TRACTION/STABILITY MESSAGE DISPLAYED, DTCS C0241, C0550, P0856 SET. *TT
#5 of 204 Re: Traction/Stability/ABS Service! [bubbaman999]
by mcp6530
Jun 11, 2006 (7:12 am)
yep, that would be it.....guess i need to take it in...
#6 of 204 Re: Traction/Stability/ABS Service! [bubbaman999]
by rmozol
Jun 11, 2006 (11:31 am)
Would you have a link to that site? Thanks
#8 of 204 Re: Traction/Stability/ABS Service! [bubbaman999]
by rmozol
Jun 12, 2006 (10:27 am)
Thanks!
#9 of 204 Control arm bushing separated on 2003 Grand Prix
by garuda
Oct 10, 2006 (6:08 am)
Hi
I was told the cleft front ontrol arm bushing separated on my 2003 Grand Prix, but I have not feeling anything abnormal while I am driving except when I press brake I can feel some vibration like ABS.
Should I repair it immediately ? what's the consequence if I delay the repair?
Thanks.
#10 of 204 01 GP GT wheel bearing replacement - ABS/trac light on
by johnnymm
Oct 24, 2006 (12:11 pm)
Changed the rear wheel bearing with no issues. Since then, the ABS light is on and my traction control is off. I cant turn it on. I have rechecked the sensor connection on the bearing hub, it seems to be ok. Unplugged the battery for 4 hours to reset the computer, hoping that would work but it didnt. Steering also feels sluggish - any idea what to do short of going to a garage? I have heard about an over the counter ABS "computer" but not sure if that will work.