Last post on May 25, 2013 at 6:24 AM
You are in the Ford Focus
What is this discussion about?
Ford Focus SVT, Ford Focus, Coupe, Hatchback, Sedan, Wagon
Go to NHTSA to file a safety complaint.
Or call Monday-Friday (8 am to 8 pm ET) (888) 327-4236 TTY: (800)424-9153
#125 of 674 Re: 2002 Ford Focus Transmission Repair Instructions [dno36]
Mar 06, 2009 (6:21 am)
I will change the filter and report back, however after the procedure I had the codes checked again and now it is not showing any codes at all. It is still very slow to shift out of first and not wanting to shift up past 3rd (?). Should I change the fluid? I used (as suggested) the same fluid that came out.
I will report back after the filter change. This may give someone a clue to their problem if the have similar experiences.
#126 of 674 Re: 2002 Ford Focus Transmission Repair Instructions [smokifl]
by Mr_Shiftright HOST
Mar 06, 2009 (8:39 am)
It could have been the connection, yes. The book suggests that as an exact reason for that code.
#127 of 674 Re: 2002 Ford Focus Transmission Repair Instructions [ed33935]
Mar 06, 2009 (5:19 pm)
Using the fluid that originally came out of the trans is like reusing your dirty dishwater. It will work but.........I don't do either myself.
What's the point... trying to save $15 in fluid?? Not trusting you bought the right fluid??
Not trusting the manufacturer put the right fluid in the bottle??
How much microscopic metallic material, and residue is in the fluid that is not caught by the filter. The old fluid looks dirty, because it is, just like your old dishwater.
While the 3ish quarts you drop in a filter change is only a bit less than 1/2 the fluid, why go on the cheap here?? It is your choice.
#128 of 674 Re: 2002 Ford Focus Transmission Repair Instructions [Mr_Shiftright]
Mar 06, 2009 (5:38 pm)
Hey Mr. Shiftright,
Thanks for all your help here!! Much appreciated!!
The "open" could be caused from a "loose" internal connection within the solenoid as well, correct. Maybe our Blue-Oval buddies got a deal on a few million AA's that have a higher-than-normal internal connection failure that doesn't short out to throw the 0750 code with loss of reverse, just the 4th gear neutral thing .
Just an idea
Mar 12, 2009 (7:18 pm)
I also have 2 2002 Focus's with the 2liter single cam engine with automatic transmissions. This morning while getting on the highway the transmission failed to go into overdrive, reved the engine, I took the first exit, slowed and took off the overdrive, at this point the cars engine light was on but I was able to drive it and it seemed just fine going through all the gears, (except the overdrive) while the overdrive was turned off. I have read the post #76 and #110 about the code "750" and will be taking it to Auto Zone for a free code check. I will report back my findings but I truly believe those post named above have already pointed out my problems. Thanks for the great advice!
#130 of 674 Re: Code "750" [edit188]
Mar 13, 2009 (4:22 pm)
Well I got a code of "0750". My printout reads: Definition, shift solenoid "1" circuit condition, not "A" I'm assuming this is the same solenoid as in post 76 and 110 since is is code "0750". Could someone please let me know what they think is the solenoid "1" the same as "A"?
#131 of 674 Re: Code "750" [edit188]
Mar 13, 2009 (6:47 pm)
I do believe the "0750" code is a generic one according to the OBD2 web site. Here is the "official" list of the P075x codes I got from check-engine-light.com...:
P0750 Shift Solenoid A Malfunction
P0751 Shift Solenoid A Performance or Stuck Off
P0752 Shift Solenoid A Stuck On
P0753 Shift Solenoid A Electrical
P0754 Shift Solenoid A Intermittent
P0755 Shift Solenoid B Malfunction
P0756 Shift Solenoid B Performance or Stuck Off
P0757 Shift Solenoid B Stuck On
P0758 Shift Solenoid B Electrical
P0759 Shift Solenoid B Intermittent
Being this is a generic code, as all of the codes that start with P0xxx are, I would think the "A" solenoid would be the proper call here. You may want to hunt some more around the web...
#132 of 674 Re: Transmission slips, dealership gives runaround... [pega1]
Mar 14, 2009 (9:52 am)
yes drive the car through the front service ,window...and what dealership you take it to may be the problem......if it is under warranty then make them put a new one in..you paid for the warranty and you shouldn't be taking it back more then 2 different times .
crossrunner ford motor employee
#134 of 674 Re: 2002 Ford Focus Transmission Repair Instructions [mrkings66]
Mar 16, 2009 (11:21 pm)
I have a 2002 Focus as well.
I too followed all the steps for post #76 & #110.
Just like you it solved my issue for dropping out of 3rd.
I've even driven it 30-40 miles as suggested by auto zone and the Car Manual.
But still no reverse!!
Does anyone know why this might be happening???