Ask the Car People.SM


Ford Focus Transmission Problems

670 messages,  Last post on May 17, 2013 at 10:56 AM

You are in the Ford Focus Forum.

What is this discussion about? Ford Focus SVT, Ford Focus, Coupe, Hatchback, Sedan, Wagon

    
Go to NHTSA to file a safety complaint.
Or call Monday-Friday (8 am to 8 pm ET) (888) 327-4236 TTY: (800)424-9153

Messages Page 13 of 68

#112 of 670 Re: 2002 Ford Focus Transmission Repair Instructions [dno36] by ed33935

Feb 27, 2009 (2:19 pm)

Replying to: dno36 (Feb 21, 2009 9:54 am)
Hello Dno36
 
Thanks for your response. I did the procedure today (Friday), the only difference is that I didnt replace the trans filter. I probably would have done it if I had seen this part listed in the original post. I got all my stuff together during the week and did it today on my day off.
 
The results: I had the code/light cleared at autozone but the problem persists. It still is reluctant to shift up and does so when I accellerate slowly. The exclamation light is still on which indicates some transmission/transaxle issues.
 
I wonder if the change of the filter is the problem or it could be a sensor or something else.
 
I feel good about the repair, just wish it had solved the problem I will probably change the filter on my next day off just to cover all bases.
 
Any thoughts anyone?
 
Thanks in advance.

#113 of 670 Re: 2002 Ford Focus Transmission Repair Instructions [ed33935] by dno36

Feb 28, 2009 (8:46 pm)

Replying to: ed33935 (Feb 27, 2009 2:19 pm)
Hey Ed,
 
Sorry to hear your issue still exists.
Yes I would definitely do a new filter. $20 is good insurance, and even before we changed the solenoid the trans shifted better.
Did you take it and get it scanned?? If so did it throw a code 0750 back?? 0750 is for the "A" solenoid.
If it did not throw the 0750 code, which one did it show??
 
Ours is fine now. The engine light actually went off without resetting it with a OBD2 reader/tool.

#114 of 670 Re: 2002 Ford Focus Transmission Repair Instructions [dno36] by keifer56

Mar 01, 2009 (5:28 am)

Replying to: dno36 (Feb 28, 2009 8:46 pm)
hi, changed the filter & fluid when i replaced the "A " solen. then got a P0761 Code ,, "C" Solen. ,,replaced it ,but still won't shift right ,, & no O/D ,,then i got a P0766 Code ,, so i cleared the Codes , drove it 30-40 mi. & re-cked it , no 0766 code came up , only 0732 ,, Gear 2 Incorrect Ratio ,,, not sure what 2 do know ,,since the 0766 never came back up ,,thinking it either needs a rebuild ('2-4' shift bands) , or might b the a bad PCM or TCM ,,,anyways thanks 4 replying ,,keith ,,

#115 of 670 Re: 2002 Ford Focus Transmission Repair Instructions [aokrongly] by smokifl

Mar 02, 2009 (8:55 am)

Replying to: aokrongly (Jul 26, 2008 12:06 pm)
Hello,
Thanks for the great information in post #76. I have a 2003 focus with fault code P0750 "A" solenoid. The car runs from a stop okay, then when it gets to 30 or 35 and the tac goes up with no power.
A transmission shop doesn't think it's the solenoid and is quoting BIG $$$$ to remove the transmission and inspect. I'm thinking I'll try the procedure and see what happens. It's worth the $80 in parts and fluid. And if it fixes it great.
 
Does any one have a picture or illustration of the transmission from the bottom with the pan off showing the filter and then with the filter off showing the solenoid?
 
Thanks again, I plan to do the work tomorrow.
Brian

#116 of 670 Re: 2002 Ford Focus Transmission Repair Instructions [smokifl] by Mr_Shiftright HOST

Mar 02, 2009 (9:55 am)

Replying to: smokifl (Mar 02, 2009 8:55 am)
That code should mean that you have no 4th gear and no reverse.
 
This code also indicates a circuit fault, not necessarily a solenoid. Could be wiring, too or a PCM fault.
 
I think there is a resistance test one can do for the solenoid.
 
If you want to tackle this on your own, you should probably subscribe to www.alldatadiy.com. I think it's about $27 for a whole year, for one car. pretty good resource but you have to be technically minded.

#117 of 670 Re: 2002 Ford Focus Transmission Repair Instructions [Mr_Shiftright] by smokifl

Mar 02, 2009 (11:08 am)

Replying to: Mr_Shiftright (Mar 02, 2009 9:55 am)
Perfect, I was able to get the figures thanks, Thanks for the reply.
 
I was reviewing some of the other posts and it seems that the procedure helped others with code P0750 tripped with the same symptoms. It just seems like the shop is giving me the run around and they want to jump right to transmission removal for big money.
 
Any other comments would be appreciated.
Brian

#118 of 670 Re: 2002 Ford Focus Transmission Repair Instructions [smokifl] by smokifl

Mar 02, 2009 (11:24 am)

Replying to: smokifl (Mar 02, 2009 11:08 am)
By the way it still has reverse.

#119 of 670 Re: 2002 Ford Focus Transmission Repair Instructions [smokifl] by Mr_Shiftright HOST

Mar 02, 2009 (12:15 pm)

Replying to: smokifl (Mar 02, 2009 11:08 am)
Well don't forget the "jiggle test", and wiggle all the wiring couplers and connectors. You could get lucky here.

#120 of 670 Re: 2002 Ford Focus Transmission Repair Instructions [keifer56] by dno36

Mar 02, 2009 (1:42 pm)

Replying to: keifer56 (Mar 01, 2009 5:28 am)
Hey Keifer,
 
Maybe I missed the post, but did you have your trans scanned before you started??
If so, what codes did it show then??
If it only came back with a 0750 code, then I would have no idea why you would be chasing other codes unless you have a PCM issue.
 
GL
 
DNO

#121 of 670 Re: 2002 Ford Focus Transmission Repair Instructions [smokifl] by dno36

Mar 02, 2009 (1:51 pm)

Replying to: smokifl (Mar 02, 2009 8:55 am)
(RE: Does any one have a picture or illustration of the transmission from the bottom with the pan off showing the filter and then with the filter off showing the solenoid?)
  
Hey smokifl:
 
I do not have a pic or illustration of the solenoid, however it is super-easy!!
 
When you pull down the filter, there will be 3 solenoids facing to the passenger side of the car, the middle one will have a white wire going to it. This is the "A" solenoid.
 
When you do it, you will say to yourself, "Wow, couldn't miss that one".
It removes with a 5/16 hex socket and pulls straight out.
 
Extra simple.
 
GL
 
DNO.

Messages Page 13 of 68

To POST a message, please Sign In.

Advertisement

Browse by Category

Browse by Vehicle
   View All Vehicles

Browse by Board
Browse by Topic
View All Topics

Edmunds Community

Advertisement