Sign In Join 



Jeep Liberty: Steering Stability and Suspension

71 messages,  Last post on Mar 25, 2009 at 7:52 AM

You are in the Jeep Liberty and Jeep Liberty Diesel Forum. Your Hosts are steve_ & tidester

What is this discussion about? Jeep Liberty, Tires, Wheels, Steering, Suspension, Diesel, SUV


Messages Page 6 of 7
1
2
3
4
5
6
7
Prev
Next
Last
Go To Msg #
Search This Discussion

#52 of 71
Liberty Steering Gear not good? by parrotpastor
Jul 11, 2008 (2:47 pm)
Reply
I just had to have my Liberty 05 diesel's steering gear replaced. The dealer said that quite a few Liberties were showing up with this same problem this past year. Anyone know about this? Is this something dangerous to Liberty owners? I'm wondering just how wide-spread this situation could be with Liberty's.
#53 of 71
Re: Liberty Steering Gear not good? [parrotpastor] by Mr_Shiftright HOST
Jul 15, 2008 (7:40 pm)
Reply

Replying to: parrotpastor (Jul 11, 2008 2:47 pm)

No record of recalls on TSB on the steering. There was a factory recall on lower ball joints, which is definitely a safety issue.
 
September 2006
Dealer Service Instructions for:
Safety Recall No. F23 -- Lower Ball Joints
 
Effective immediately, this recall (Safety Recall F23) cancels and supersedes Safety Recall C36 Lower Ball Joints. Please remove and discard from your files all copies of Safety Recall C36 (dated December 2003). All vehicles involved in Recall C36, whether completed or not, must have this recall performed.
 
Models
2002-2006 (KJ) Jeep(R) Liberty
NOTE: This recall applies only to the above vehicles built through March 15, 2006 (MDH 031510).
#54 of 71
Re: Jeep Liberty making noise when backing [joebj1178514] by eatplaysleep
Jan 01, 2009 (9:40 pm)
Reply

Replying to: joebj1178514 (Nov 17, 2006 1:48 pm)

Hey joe...
I know it's been two years since you originally posted this, but I recently purchased a 2002 Jeep Liberty and I am experiencing this exact same problem. I was wondering if you ever happened to figure out what was wrong? I'd really appreciate any help.
#55 of 71
Getting biltseins by jayrider
Mar 05, 2009 (1:24 pm)
Reply
Ordered a set of bilstein shocks for my 03 Liberty. Anyone done that swap yet? Got a great deal on the shocks ---$237 for all 4 -- free shipping. Will cost $170 to install and a wheel alignment for $60. Will post after I have them to see if I wasted my money or if the results are dramatic.
#56 of 71
Re: Getting biltseins [jayrider] by caribou1
Mar 06, 2009 (1:03 am)
Reply

Replying to: jayrider (Mar 05, 2009 1:24 pm)

Hi jayrider,
How many miles do you have on the Jeep now?
Mechanically speaking, mine is still like new after 90,000 miles. It has a few dents but not much play in the transmission. Rear brakes are still perfect and moan when the temperature is cool and damp. I don't need wheel alignment yet, but why is it offered to you?
#57 of 71
Re: Getting biltseins [caribou1] by jayrider
Mar 06, 2009 (1:29 pm)
Reply

Replying to: caribou1 (Mar 06, 2009 1:03 am)

Only have 25k miles on my Ltd. Just looking to upgrade the handling/ride a bit. The strut replacements on the front make alignment a good idea. No problems with my liberty either. Ride is a bit jittery/choppy so i'm giving the bilsteins a try. Some say the improvement is dramatic and some say they don't make much difference. I figure I've got 14 more years to reach 90,000 miles -- just looking for a change.
#58 of 71
Re: Getting biltseins [jayrider] by caribou1
Mar 06, 2009 (11:34 pm)
Reply

Replying to: jayrider (Mar 06, 2009 1:29 pm)

Before you change your shock absorbers, you can have the present ones evaluated. Worn shocks tend to elongate, so the vehicle shows more clearance between the wheel pit and the top of the tire. Tire wear is also a good indicator.
#59 of 71
Re: Getting biltseins [caribou1] by jayrider
Mar 07, 2009 (6:11 am)
Reply

Replying to: caribou1 (Mar 06, 2009 11:34 pm)

Good advice caribou1, but I'm replacing the shocks regardless of whether they are worn or not. I'm upgrading from the original shocks to a premium set to upgrade the ride and handling. As I said, don't know if I'm wasting my money or not but the shocks are on their way from the retailer. I'll let you know if they really make a difference.
#60 of 71
New bilsteins on my 03 liberty by jayrider
Mar 10, 2009 (12:25 pm)
Reply
The improvement in ride is absolutely dramatic. The jiggling, jouncy ride has been replaced by a much smoother controlled feeling. I was afraid they would make the ride stiffer but it is a beautiful balance between firmness and comfort. The car corners and cruises like a different vehicle. To be honest, i didn't expect a lot because my truck only has 25k miles and the shocks should be like new. Either those old pogos were shot or they were poorly designed in the first place.
If anyone is interested the part numbers are BE5-D916-HO and BE5-D917. Bilstein is running a buy three-get the fourth one free this month. $250 free shipping which is cheaper than most OEM replacements. Caribou 1-- if you plan on keeping your jeep for a while --get a set and enjoy!!
PS --I don't own any stoc in bilstein. Actually I don't own any stock at all. Lucky me.

Messages Page 6 of 7
1
2
3
4
5
6
7
Prev
Next
Last
Go To Msg #
Search This Discussion
To POST a message, please Sign In.

New? Join Now!

Forum Tools

Please sign in.
Email Address:

Password:

Forgot Password?

Search Forums

Enter Keyword(s)

Advanced Search

Browse by Vehicle



View All Vehicles
Advertisement
Ask the Community
See What People Are Asking

Browse by Board

Browse by Topic


View All Topics

Today's Chats

Advertisement