Sign In Join 



Jeep Liberty: Steering Stability and Suspension

71 messages,  Last post on Mar 25, 2009 at 7:52 AM

You are in the Jeep Liberty and Jeep Liberty Diesel Forum. Your Hosts are steve_ & tidester

What is this discussion about? Jeep Liberty, Tires, Wheels, Steering, Suspension, Diesel, SUV


Messages Page 5 of 8
1
2
3
4
5
6
7
8
Prev
Next
Last
Go To Msg #
Search This Discussion

#36 of 71
Re: Jeep Liberty Upper Control Arms [market525] by market525
Nov 08, 2006 (9:45 am)
Reply

Replying to: market525 (Nov 06, 2006 4:09 pm)

Well, it's even better than I was told. They replaced: lower ball joints (2nd recall) both upper control arms (bushings & control arms are one unit). Then, when they put it back together & but it on the ground, they told me the ball joints made a popping sound. Took it back apart & replaced both steering knuckles, too! Unbelievable! Without extended warranty, this would have been well over a $1,000 repair! Less than 40K miles at that! I paid for a front end alignment (which I find illogical) and the $100 extended warranty deductible - so $180 total. But needless to say, I've certainly lost confidence in this vehicle.
#37 of 71
Re: Jeep Liberty Upper Control Arms [martinj71] by market525
Nov 08, 2006 (9:47 am)
Reply

Replying to: martinj71 (Nov 08, 2006 7:48 am)

Jim
The car was making zero noises. Drove & steered fine. Reading some of these breaking ball joint stories really surprises me; I just did not realize the severity of the problem.
 
Sounds like you'd better get to the dealer ASAP.
#38 of 71
Re: Jeep Liberty Upper Control Arms [market525] by martinj71
Nov 08, 2006 (11:53 am)
Reply

Replying to: market525 (Nov 08, 2006 9:47 am)

I see a few people talking about a (2nd recall) what is that about and how do I find out what recalls have been done on my Jeep. I ask because I bought this about 6 months ago. Thanks for the info.
 
Jim
#39 of 71
Re: Jeep Liberty Upper Control Arms [martinj71] by siberia
Nov 09, 2006 (3:36 am)
Reply

Replying to: martinj71 (Nov 08, 2006 7:48 am)

Jim,
 
Bad upper control arm bushings can make exactly the sound that you describe and if they are bad this condition is not immediately dangerous as it can take quite a while to wear to destruction. Upper ball joints and control arm bushings generally last a long time in this suspension configuration because the don't carry near as much load as the lower ball joints.
 
You need to inspect your lower ball joints ASAP because if they the cause of this noise you might not have much time before one or both if them pop and your Jeep drops to the ground. This is easy to do yourself but I don't have time to write the instructions.
 
Maximum allowable axial play is 1.5mm or about 1/16 inch.
 
And one other thing, if your upper bushing are gone and you have metal to metal contact the top of your tires should be leaning very noticeable inward. Stand far enough behind or in front of the vehicle to observe front and rear tires and compare vertical alignment. The top of the front tires should appear slightly out compared to the rear not in.
 
Stay safe.
#40 of 71
Re: Jeep Liberty Upper Control Arms [martinj71] by market525
Nov 09, 2006 (3:46 am)
Reply

Replying to: martinj71 (Nov 08, 2006 11:53 am)

Jim,
Your dealer can tell you exactly what's been done to your car. They will run the VIN (vehicle identification number) through their (Chrysler's) computer system. Would take them a matter of minutes to do.
 
Steve
#41 of 71
Re: Jeep Liberty Upper Control Arms [market525] by martinj71
Nov 09, 2006 (4:15 am)
Reply

Replying to: market525 (Nov 09, 2006 3:46 am)

Everyone, thanks for being so helpful. I called the dealer last night and the (2nd recall) has not been done on my Jeep. They are on national back order right now, so I wont be able to get it in till Monday or Tuesday. The service manager told me he would also check on the upper control arm bushings while I had it up there,,, free of charge. Thanks again all.
Jim
#42 of 71
02' liberty by martinj71
Nov 14, 2006 (4:02 am)
Reply
One more question. Jeep Liberty, 02’ 38k… when I come to a stop. 80% of the time it wants to fall on its face (stall) anyone else experience this?
#43 of 71
Jeep Liberty making noise when backing by joebj1178514
Nov 17, 2006 (1:48 pm)
Reply
My 2004 Jeep liberty (45K miles) just started to act up today. I warmed up my car for about 2 minutes and backed out of my parking spot while turning the wheel when I heard a loud blunt noise coming from the rear axle area. This loud noise only happened when backing out and turning the wheel at the same time, this didnt happen when backing out straight. The sound is like something snapping or something getting hit with blunt force, kind of like a football hitting the side of a car.
 
I also have a problem when driving foward and turning the wheel all the way to the left/right to make a turn. The car struggles to turn, as if the front wheels pivoting makes it diffucult for the car to move. The car almost stutter struggles (not an engine stutter) to make the turn when turning the wheel.
 
I thought this may be a lower ball joint problem, but the lower ball joint problem should not be applicable to the rear wheels of the car, but then again, the noise/stuttering only happens when I turn my steering wheel. Any hints?
 
I've tried to be specific as possible. Anyone out there have any ideas of what the problem is? Please help me.
 
I'm planning on going on a 13 hour road trip, but I might have to save that plan for later.
#44 of 71
Re: Jeep Liberty making noise when backing [joebj1178514] by market525
Nov 17, 2006 (4:00 pm)
Reply

Replying to: joebj1178514 (Nov 17, 2006 1:48 pm)

Does the car have a limited slip differential? And has the rear axle lube been changed? - usually recommended at 30K service intervals.
#45 of 71
Hot Tires, Smells like burning rubber by jeepgirl05
Jan 22, 2008 (11:41 am)
Reply
My Jeep Liberty Diesel '05, smells like the back passenger tire is on fire, its not actually on fire, but smells like it could be. Can see smoke coming from it? The brakes are squeaky too. I live in Montana, lots of snow here, neighbor says take it to straight stretch of road, run it forward bout 20mph, then do the same thing but go backwards. He claims its something to do with snow packed up in the break area up front?? Sounds bogus to me.
Thnx!

Messages Page 5 of 8
1
2
3
4
5
6
7
8
Prev
Next
Last
Go To Msg #
Search This Discussion
To POST a message, please Sign In.

New? Join Now!

Forum Tools

Please sign in.
Email Address:

Password:

Forgot Password?

Search Forums

Enter Keyword(s)

Advanced Search

Browse by Vehicle



View All Vehicles
Advertisement
Ask the Community
See What People Are Asking

Browse by Board

Browse by Topic


View All Topics
Advertisement