Sign In Join 



Dodge Magnum Transmission Issues

55 messages,  Last post on Nov 10, 2009 at 7:35 AM

You are in the Dodge Magnum Maintenance & Repair Forum. Your Host is kcram

What is this discussion about? Dodge Magnum, Transmission, Wagon


Messages Page 5 of 6
1
2
3
4
5
6
Prev
Next
Last
Go To Msg #
Search This Discussion

#36 of 55
Transmission 411 by pancha252000
Jan 05, 2009 (1:47 pm)
Reply
Need some help, if possible, I have a 2006 sxt dodge magnum... Got ready to back up and it was moving inch by inch,, same thing when i went forward...finally it was working but when it shifts, it feels like it is shifting really hard... I carrried it to the dealer thinking it was low on fluid... and how can we find out about that...30$ to tell me the levels were correct and the transmission guy was not in and to make another appointment to bring it back into the dealer...a couple days later the check engine light comes on and stays on all day then goes off..so what is there to do???? I want to know if you can work around the dealer and check the fluid yourself... and what is going on with the transmission... PLEASE let me know...
#37 of 55
Re: Transmission 411 [pancha252000] by batmobile2
Jan 06, 2009 (6:24 am)
Reply

Replying to: pancha252000 (Jan 05, 2009 1:47 pm)

u can buy a trans dipstick from a dealer or the snap-on tool man I have a 05 rt hemi and it sounds like either ur trans silinoid located under the shifter or the torque converter clutch is burning out. I need a trans for mine. If there is a autozone near u they will plug ur car in and tell u whats wrong for free
#38 of 55
T3 by pancha252000
Jan 10, 2009 (6:40 am)
Reply
#39 of 55
Transmission 411 by pancha252000
Jan 10, 2009 (6:42 am)
Reply
In the book it says it has a saftey deley where it has to be warmed up or it will go into saftey mode... but now i went to start my car this morning and it idioled for about 2 seconds then shut off... i tried giveing it gas but it still shut off. The security light is on and will not go off... think it is a defect with the securtiy
#40 of 55
Re: Transmission 411 [batmobile2] by jacc335
Mar 05, 2009 (9:39 am)
Reply

Replying to: batmobile2 (Jan 06, 2009 6:24 am)

Do you know the part # for the dipstick & how remove the dipstick tube cap? I have been told the trans is sealed &draws in water & will not let it evatorate out
#41 of 55
Re: Transmission 411 [pancha252000] by dtray50
Mar 16, 2009 (1:09 pm)
Reply

Replying to: pancha252000 (Jan 05, 2009 1:47 pm)

I have a 2006 sxt dodge magnum that is giving me the same issues (exact issues) that you are experiencing. Have you located the cause or had the issues resolved?
#42 of 55
Re: Transmission 411 [dtray50] by jacc335
Mar 17, 2009 (5:05 am)
Reply

Replying to: dtray50 (Mar 16, 2009 1:09 pm)

I'm Jacc335,I got your email of Mar 16. I have not had any issues with my trans in my 05 magnum. I removed the fill tube cap, got dip stick from junk yard, I'm going to add trans cooler later this summer .The sealed trans draws in water but does not vent it out.
#43 of 55
Re: Transmission 411 [jacc335] by noocyt
Mar 18, 2009 (7:16 am)
Reply

Replying to: jacc335 (Mar 05, 2009 9:39 am)

2006 SRT8 MAGNUM WHAT IS THE PART # OR AFTER MARKET PLACE TO GET A DIPSTICK AND HOW DO I UNSEAL THE PRESENT ONE . I HAVE TRANSMISSION OIL ON MY GARAGE FLOOR ALSO WHAT TYPE OIL ??
#44 of 55
Dodge Magnum by jacc335
Mar 18, 2009 (11:48 am)
Reply
The part # is9336 I found it on internet for $109. I got one at junk yard for $1.00. Turn the fill tube cap slow,to left ,as you push down. cut the dip stick to fit. Mine is about "28.25..I will use top brand of oil. You can email oil co.
#45 of 55
Tranmission codes by pancha252000
Apr 03, 2009 (9:31 am)
Reply
Well carried car to dealer and they said that it was ""veh had codes P0700, P0703 in correct gear ration. Codes are not current cleared codes and test drove if codes come back trans will need further diagnoses""... I was not told what the codes were or anything just rying to dig deeper into my pocket.. Looked codes up on net and found that P0700 is Transmission Control System Malfuction..P0703 is Brake Switch Circuit Malfuction... Has any one had such a thing happen Please let me know what the fix was??? Thanks

Messages Page 5 of 6
1
2
3
4
5
6
Prev
Next
Last
Go To Msg #
Search This Discussion
To POST a message, please Sign In.

New? Join Now!

Forum Tools

Please sign in.
Email Address:

Password:

Forgot Password?

Search Forums

Enter Keyword(s)

Advanced Search

Browse by Vehicle



View All Vehicles
Advertisement
Ask the Community
See What People Are Asking

Browse by Board

Browse by Topic


View All Topics

Today's Chats

Advertisement