You are here: Forums Sedans Buick Lucerne Buick Lucerne Exterior

Buick Lucerne Exterior

55 messages,  Last post on Nov 13, 2009 at 2:45 PM

You are in the Buick Lucerne Forum. Your Hosts are pat & karens

What is this discussion about? Buick Lucerne, Exterior, Sedan

Messages Page 5 of 6 1 2 3 4 5 6 Prev Next Last

Go To Msg # Search This Discussion

#35 of 55 Re: The [loyalbuickfan] by imidazol97 Jul 06, 2006 (4:43 pm)
Replying to: loyalbuickfan (Jul 06, 2006 3:56 pm) A different way to _emphasize_ a word without using caps and yelling is to us the underscore key. Or you can use the italics or bold at the bottom of the reply window. Sorry if I'm off topic.
#36 of 55 Re: The [exalteddragon1] by 62vetteefp Jul 09, 2006 (3:01 pm)
Replying to: exalteddragon1 (Jul 06, 2006 7:52 am) Black means sporty/understated. CXS is sporty.   Chrome means bling. CX/CXL is bling.
#37 of 55 Door handle by rake2 Aug 04, 2006 (1:04 pm)
Just had the driver's door handle break on me the other day. Have about 11,100 miles on it, so I'm a bit disappointed. My brother says it's the first one he's seen break like that, so hopefully it was just cracked at the factory and not a sign of a repeat problem. Thing is plastic inside, apparently. Replies to this message: 76ta (Aug 11, 2006 9:06 am)
#38 of 55 Re: Door handle [rake2] by 76ta Aug 11, 2006 (9:06 am)
Replying to: rake2 (Aug 04, 2006 1:04 pm) Took delivery of my ordered CXS in Jan. 6-8 weeks later three outer handles replaced due to "wrinkling" plastic chrome, no handle issues since.
#39 of 55 Lucerne Door Handle and turn signal sounds by impartial1 Oct 01, 2006 (11:32 am)
I have 3500 miles on my Lucerne. Door handle on Driver side recently came unattached. I am worried that all of the door handles will suffer from the same problem. Wondering what was done for other owners in this situation. Where all door handles replaced?   Also, occasionally my turn signal indicator sound changes from soothing to abrasive. This noise then continues for the duration until I turn the car off. Happens maybe once out of every 10 trips. Has anyone else had this issue.   Finally, I seem to be hearing Knocking from 3.8v6 engine at low RPMs. Is anyone else havong this problem?   Thanks! Replies to this message: rake2 (Oct 03, 2006 2:48 pm) fcox (Nov 27, 2006 6:43 pm) grant570 (Dec 04, 2007 6:00 am) chuck21401 (Dec 04, 2007 7:25 pm) rhassell (Jan 02, 2008 10:30 am) wittum4 (Nov 13, 2009 2:45 pm)
#40 of 55 Re: Lucerne Door Handle and turn signal sounds [impartial1] by rake2 Oct 03, 2006 (2:48 pm)
Replying to: impartial1 (Oct 01, 2006 11:32 am) My door handle broke a few months back as well. They just replaced the handle. There is a cheap plastic piece in there that snapped. I am concerned about possible recurring issues, especially now that someone else had the same problem. Fortunately, my service manager is my brother. Replies to this message: fcox (Nov 27, 2006 6:43 pm)
#41 of 55 Can I remove the portholes? by grandmarquis Oct 30, 2006 (5:52 am)
Has anyone removed the portholes? How is the plastic strip attached? Are there any fasteners behind the strip? Are there any holes or indentations in the car body, or is the porthole strip just flat on the sheet metal? Replies to this message: wr_guy (Oct 30, 2006 9:49 am) grandmarquis (Oct 30, 2006 1:29 pm) imidazol97 (Oct 30, 2006 2:02 pm) kcwolfpack59 (Apr 15, 2007 8:13 pm)
#42 of 55 Re: Can I remove the portholes? [grandmarquis] by wr_guy Oct 30, 2006 (9:49 am)
Replying to: grandmarquis (Oct 30, 2006 5:52 am) I believe there is a hole under the molding.   I also think the car would look good w/o the portholes but it is a Buick after all. Replies to this message: grandmarquis (Oct 30, 2006 1:29 pm) imidazol97 (Oct 30, 2006 2:02 pm) kcwolfpack59 (Apr 15, 2007 8:13 pm)
#43 of 55 Re: Can I remove the portholes? [wr_guy] by grandmarquis Oct 30, 2006 (1:29 pm)
Replying to: wr_guy (Oct 30, 2006 9:49 am) Thanks for the quick reply. I dislike the portholes so much that it is a deal killer for me. Replies to this message: imidazol97 (Oct 30, 2006 2:02 pm) kcwolfpack59 (Apr 15, 2007 8:13 pm)
#44 of 55 Re: Can I remove the portholes? [grandmarquis] by imidazol97 Oct 30, 2006 (2:02 pm)
Replying to: grandmarquis (Oct 30, 2006 1:29 pm) Ask the bodyshop guy at a dealership. I can't believe they have holes in them holding them on. All other trim on the cars is done without holes from what I've seen in manuals for leSabres. I would be really surprised if there were holes.

Messages Page 5 of 6 1 2 3 4 5 6 Prev Next Last

Go To Msg # Search This Discussion

You are here: Forums Sedans Buick Lucerne Buick Lucerne Exterior