219 messages,
Last post on May 17, 2013 at 8:07 AM
You are in the
Dodge Caliber Maintenance & Repair Forum.
What is this discussion about?
Dodge Caliber, Engine, Wagon
#215 of 219 Re: Caliber Engine Stalling [vansteph]
by vansteph
Jul 29, 2012 (11:20 am)
Problem persists -- I'm thinking it might have something to do with the powertrain control module (pcm). Has anyone had any experience with the pcm being the cause?
#216 of 219 Re: Caliber Engine Stalling [vansteph]
by gerry31
Aug 02, 2012 (5:29 pm)
Dodge issued a recall on some of the 2009 Caliber pcms for a defect that "can cause the engine to stall and result in a crash without warning."(Dodge Safety Recall H330).
I still have some stalling issues on my Caliber. To paraphrase Quentin Tarantino, What's on my mind right now ain't the coffee in my kitchen, it's the unreliable Dodge Caliber in my garage.
#217 of 219 Ignition problem?
by djdeano
Mar 22, 2013 (3:14 pm)
#218 of 219 Ignition problem?
by djdeano
Mar 22, 2013 (3:14 pm)
I have a 2007 Dodge Caliber R/T. Recently the key fob stopped working. Had it checked, it still sends a signal but not to car. When I shut off the car and pull the key out, open the door, it starts beeping and says the key is in the ignition. Can anyone tell me why this is? And what my fix may be?
#219 of 219 Re: 2007 Caliber Water is leaking in on passenger side. [momof3cats]
by 08caliber
May 17, 2013 (8:07 am)
I had this same problem: they found that the wheelwell wasn't sealed properly behind the drivers side tire and water was coming back into the car. Once this was sealed correctly I haven't had any problems for the last 3 years.