Last post on Dec 12, 2010 at 12:46 PM
You are in the BMW 3-Series
What is this discussion about?
BMW 3 Series, Coupe
#31 of 37 Re: Transmission type in 1999 328ic [fixitrod]
Nov 29, 2007 (10:42 am)
hIt does not occur when braking but it is just riding at low speed as we are leaving the neighborhood.
Wheel bearing, perhaps. The driveshaft fas a rubber coupling at the transmission as well as a center bearing.They should still be good on your car, but it is something else to check.
I am familiar with visual and checking for play at the bushing; are there other indicators?
Nope, that's pretty much it.
$110 seems like a good deal on a service, however I wouldn't have any fun.
I perform the minor maintenance and repairs on my cars and bike, but it's worth $110 to not have to deal with an ATF change. I assume that you know that there is no dipstick and that the fluid must be checked through the fill plug at the proper temperature. In any case, the gory details can be found here and here. BMW now calls for a ATF change at 100K, but I think that you are smart for changing it before then. If you are going to tackle the final drive I'd use a good synthetic 75W-90 gear oil. I have used Mobil 1, Red Line, Royal Purple, and Valvoline Synpower- and all have worked fine.
#32 of 37 In need of tranny model for 2000 323i
Jan 12, 2009 (3:39 pm)
Not sure if it is a 5L40E OR ZF 5HP-19? Unable to get under the car at this time, but need info to search for replacement. I believe it's production was 6/00. Thank you for all your help.
#33 of 37 Re: In need of tranny model for 2000 323i [mjbro4]
Jan 12, 2009 (6:06 pm)
It's most likely a 5L40.
#34 of 37 Re: In need of tranny model for 2000 323i [roadburner]
Jan 13, 2009 (4:37 am)
Thanks for the response, would the vin # help determine this also? Any way to enter my vin and see this?
#35 of 37 Re: In need of tranny model for 2000 323i [mjbro4]
Jan 13, 2009 (7:45 am)
Try this site.
#36 of 37 Re: In need of tranny model for 2000 323i [mjbro4]
by MrShift@Edmunds HOST
Jan 13, 2009 (8:45 am)
Alldata says it's a ZF 5HP 19 (build date 3/00 to 6/00)
This trans would have the ID # A5S 325 Z
The GM 5L40E looks to be the earlier unit. So if ALLDATA is correct 3/00 is the cut-off date. I'd guess most 323s are indeed the GM 5L40E, but not yours, which is a fairly late build date.
#37 of 37 Re: 2000 3231 transmission leak ( automatic ) [tbysea]
Dec 12, 2010 (12:46 pm)
I've experince the same issue with my BMW
I'm not sure if it has to do with the cold weather. It's happen to me twice now and my car is in the mechanic. Has this happen anymore to your car what did you guy do to fix.