- #132 of 259
-
pt cruiser 2004 hesatation in engine
by ttheriaque
-
Nov 14, 2007 (10:58 am)
-
|
|
my 2004 pt cruiser has a very bed hesattion when driving or when im at a red light. they can not find out what the problem is and its getting very frustrated iv only had the car for two months now please help.
|
- #133 of 259
-
hesitation and engin light is on
by sdkendra
-
Nov 23, 2007 (10:35 am)
-
|
|
I have an 04 2.4l pt cruiser with only 35.000 miles this last friday it started missing esp when excellerating and now ths engine light is on !! Any ideas about what the problem is ?
|
- #134 of 259
-
Re: hesitation and engin light is on [sdkendra]
by chdabren
-
Nov 25, 2007 (8:12 am)
-
|
|
Replying to: sdkendra (Nov 23, 2007 10:35 am)
ya gotta tell me what the code is in the 'puter. It's probably a P0300 0301, 0302 OR 0303 code. I need to know what it is to help u more, please. Thanks
Chris (Chrysler Master Tech
|
- #135 of 259
-
Re: hesitation and engin light is on [chdabren]
by sdkendra
-
Nov 25, 2007 (10:34 am)
-
|
|
Replying to: chdabren (Nov 25, 2007 8:12 am)
JUST GOT THE CODE AND JUST NEED PLUGS AND WIRES . Thanks so much for your reply 1!! Happy Hollidays ! 
|
- #136 of 259
-
Re: PT missfiring, engine bucking [kidcruiser]
by fatdawgy
-
Nov 25, 2007 (3:50 pm)
-
|
|
Replying to: kidcruiser (Jul 25, 2005 6:18 pm)
The 1682 and 1684 codes are factory codes the p0700 is a speed sensor code. The speed sensors are easy to replace yourself their right under the battery box. Hurry and replace them if not youll be doing what I have to do now to my kids car and replace the trans. control module. Once you've replaced the sensors the codes will erase and also check the EAXT fuse which is in the same area, most likely thats blown.
|
- #137 of 259
-
Re: PT missfiring, engine bucking [fatdawgy]
by chdabren
-
Nov 26, 2007 (6:09 pm)
-
|
|
Replying to: fatdawgy (Nov 25, 2007 3:50 pm)
Reference to a reply by "fatdawgy" on Nov. 25, 2007 about "Re:PTmisfiring, engine bucking". I don't know where u got the information on 1682 and 1684 for "factory codes, much less telling someone that the speed sensors are located under the battery box. At this point, which speed sensors are u talking about? Input/Output speed sensors or wheel speed sensors? Second...why would u tell someone that if they don't replace these sensors in a "hurry" they'll have to replace the trans. control module? This is so not true. The speed sensors, do not harm the EATX module. They simply use a magnetic field to tell the module what speed the input and output clutch turbines are spining at. The EATX uses this information to determine shift points and actuate the solenoids in the trans soleniod pack as well as operate the speedometer. Wheel speed sensors simply tell the ABS module what speed each wheel is turning at. And simply replacing the Input/Output speed sensors DOES NOT clear codes. Codes don't clear on their own. Please don't give out misinformation. That is worse than misdiagnosing a problem that can ultimately cost ALOT of $$ for a simple problem. Failure of Input/Output speed sensors ONLY affects shift points and does NOT ruin an EATX module. IF the sensors fail OR if the EATX module does go bad, the trans usually will go into "limp in" mode which means only 2nd gear is available. Take this info and use it as u wish but it's info that is clear, concise and on the money. Not to mention it comes from a Master Certified Chrysler tech. It's also available on an exclusive Daimler/Chrysler website dedicated to Chrysler vehicles and available only to Chrysler Employees.
|
- #138 of 259
-
2001 cruiser with 2003 engine ?? won't run, help
by muledr
-
Nov 27, 2007 (2:13 pm)
-
|
HELP ME CHRIS (chdabren) I BOUGHT A 2001 CRUISER WITH A 2003 ENGINE INSTALLED AND NOT RUNNING. I HAVE NOT BEEN ABLE TO GET IT RUNNING OR FIND THE RIGHT PERSON TO TELL ME WHAT TO DO TO CORRECT THE PROBLEM. I CAN'T BELIEVE THAT I HAVE TO REPLACE THE ENGINE WITH A 01.DEALER SAID CRANK SENSOR IS DIFFERENT AND WON'T WORK. CAN,T THINK SOMEONE HAS NOT RAN INTO PROBLEM THIS BEFORE. THANK YOU HELP TURN MY  CRUISER INTO A
|
- #139 of 259
-
Re: 2001 cruiser with 2003 engine ?? won't run, help [muledr]
by chdabren
-
Nov 27, 2007 (2:35 pm)
-
|
|
Replying to: muledr (Nov 27, 2007 2:13 pm)
ok.......first of all...u can't swap an '03 engine into an '01 PT. The controllers are different (computer), the crank sensor is different. The ground locations for the engine wiring harness are different. Why did u need to replace the motor? Or why was the motor replaced? You, my friend now have a 2,500 lb. paper weight. You can however, excersise a few options here. If you're lucky, you can swap in an '03 engine harness and MAYBE everything will match up, but you'll have to pay xtra special attention to little things....like the connectors for sensors. They have to be the same. The engine comptuers from year to year are different in that the software is different and you cannot "reprogram" them. On top of that, you can't just swap in an '03 computer because a "used" computer already has a VIN# programmed in from the vehicle it came out of. My advice? Simple, get a used 2001 engine and do a swap again OR get another car. You cannot swap engines like that. The dealership is right....it won't work!! If I can help further....just let me know. Good luck!
|
- #140 of 259
-
Re: 2001 cruiser with 2003 engine ?? won't run, help [chdabren]
by muledr
-
Nov 28, 2007 (3:24 pm)
-
|
|
Replying to: chdabren (Nov 27, 2007 2:35 pm)
I bought the PT with the engine installed and thought I could make it run, I like a challenge, but not this much....... Don't know what happened to the engine that was in it. The harness that is in it is from the '03 and all connectors hook up. I compared a 2001 DCX service manual (8W-30-6) FUEL/IGN SYS to a 2003 DCX 2003 service manual (8W-30-21) and found the pin locations and voltage at the supply different and was hoping I could change the power control module. looks like I will be looking for a '01 2.4 to swap or buy. thank you for the quick response and information.
|
- #141 of 259
-
chdabren 06 CROSSFIRE DASH NOISE/FAN
by muledr
-
Nov 28, 2007 (3:34 pm)
-
|
|
I just bought a new '06 Crossfire and on occasion have a dash noise that sounds like a circuit breaker coming on and off' and the blower motor fan does what it wants to whenever it wants to , its still under warranty but would like your opinion. Great car though. THANKS AGAIN
|
![[F]](http://a332.g.akamai.net/f/332/936/12h/www.edmunds.com/media/townhall/webxicons/site.gif){kind=small}
Forums
Wagons 
