You are here: Forums Coupes & Convertibles Chrysler Sebring Chrysler Sebring Electrical Problems

Chrysler Sebring Electrical Problems

120 messages,  Last post on Nov 27, 2009 at 1:33 PM

You are in the Chrysler Sebring Forum. Your Host is claires

What is this discussion about? Chrysler Sebring, Convertible, Sedan

Messages Page 11 of 13 1 ... 7 8 9 10 11 12 13 Prev Next Last

Go To Msg # Search This Discussion

#93 of 120 Anyone else ever heard of this before? by bobnjenn Mar 26, 2009 (8:25 pm)
I have an 08 Chrysler Sebring soft top convertible 4cyl. it drives ok other then when i am stopped for a minute in traffic and the car completely stalls out on me... no lights come on and there is no indication of any problems... the car has been in a few times for this and they cant even tell me whats wrong! gotta love dealerships!
#94 of 120 Re: RPM Gauge Won't Work [bernman402] by emanofoz Mar 28, 2009 (7:29 am)
Replying to: bernman402 (Mar 30, 2008 3:38 pm) Had same problem with a 96 Sebring. Cold solder joints on the back side of the instrument cluster. You will need to remove the instrument cluster and heat up a soldering iron. Touch each solder joint just long enough to melt the solder then remove the iron, so as not to damage the electonics behind the joint. I found a Haynes Motor manual very helpful in explaning how to remove the dash and instrument cluster.
#95 of 120 Re: tail lights [racnocdeb] by uccmember Apr 05, 2009 (4:40 pm)
Replying to: racnocdeb (Nov 28, 2008 5:13 pm) Don't know for sure how to asolve your problem but my 96 Convertible interior lights stay on and will only go out when I turn the ignition key. Maybe itwill work for you. When I exit the car the lights go out, but if I open a door again all the lights go on, and will not go out until I insert the key in the ignition. Anyone know why? Replies to this message: vwebex (Nov 25, 2009 6:37 am)
#96 of 120 horn issue by jpii Apr 11, 2009 (9:32 pm)
My 2000 chrysler sebring JXI convertible horn won't sound when I depress the proper area in the center of the steering wheel. But it does sound when I lock-arm alarm with the remote key fob. Anybody know why this is?
#97 of 120 Re: Cruise control-horn-airbag light [capt1014] by ritzcrker Apr 20, 2009 (3:26 pm)
Replying to: capt1014 (Dec 12, 2006 6:27 am) I have a 2001 Sebring and I have the same thing happening, airbag light on, cruise control and horn not working. I heard a crack when this began. Did you find out what was wrong and what did it cost to fix it? Replies to this message: 2001_sebring (Jun 20, 2009 7:03 am) ritzcrker (Jun 23, 2009 5:38 pm)
#98 of 120 Cruise control-horn-airbag light by ritzcrker Apr 20, 2009 (3:39 pm)
Anyone who can answer #97, please do...any help would be appreciated.
#99 of 120 Re: airbag light [austingirl] by 06beetleowner May 06, 2009 (6:55 pm)
Replying to: austingirl (Sep 05, 2008 10:49 am) I just had the exact thing happen to my 2006 Chrysler Sebring Convertible! What ended up being wrong with yours? Replies to this message: ritzcrker (May 07, 2009 3:36 pm)
#100 of 120 Re: airbag light [06beetleowner] by ritzcrker May 07, 2009 (3:36 pm)
Replying to: 06beetleowner (May 06, 2009 6:55 pm) I actually haven't had it checked out yet and am driving it as is. Did you get yours fixed? If so, what did they say it was and what did it cost you?
#101 of 120 ddtd1992 by ddtd1992 May 09, 2009 (6:41 pm)
The problem is the pollution control computer, I have a 2001 sebring and would just die no codes nothing. Dealer insisted nothing was wrong and acted like I was nuts. They did work with me had to leave it there for 2 Weeks , They would start it every day and finally repeated the problem, They never catch because it clears the code immediatly when it starts, only way to catch it is to have it under a monitor when it happens, Good news was that it has a special warrenty because it was a pollution controll comp. I had 65000 on it
#102 of 120 stalling out by hummingbirdz May 19, 2009 (8:15 am)
I have a 1999 Chyrsler Sebring Convertible. I resolved the flooding problems by reading other posts. My car randomly stalls out while driving 60mph or while idling in traffic. I will take up to one hour or that day to restart. It has been on every diagnostic machine and nothing shows up. It will cut off in the morning, the evening or not at all for a day or so. My mechanic tells me that they can't fix what they can't find. I have a new distributor, harmonic balance, fuel pump, My car in now just sitting in my driveway because I'm afraid to drive it. You just don't know when it will cut off. Has this happened to anyone else? How did you fix the problem? Replies to this message: ritzcrker (May 23, 2009 7:11 am)

Messages Page 11 of 13 1 ... 7 8 9 10 11 12 13 Prev Next Last

Go To Msg # Search This Discussion

You are here: Forums Coupes & Convertibles Chrysler Sebring Chrysler Sebring Electrical Problems