Last post on Mar 23, 2013 at 3:30 PM
You are in the Chrysler Sebring
What is this discussion about?
Chrysler Sebring, Convertible, Sedan
#95 of 149 Re: 2006 Chrysler Convertible Sebring Window Shattered [cheriey]
Nov 19, 2009 (7:19 pm)
I had an 1986 Lebaron convertible and the window shattered. I replaced it with a plastic window (no redefogger). I had to go to a custom shop to have the work done. It cost approximately $300 to have it done. The plastic was sewed to the canvas convertible top. Plastic is O.K if you don't need the rear defogger and don't want to worry about a glass window shattering again. Good luck.
#97 of 149 Re: Convertable top problems [tom259]
Nov 29, 2009 (4:33 am)
I have a 1995 Lebaron and had the same problem. The roof would go down and not come back up. You need to replace the convertible relay switch.
#98 of 149 Re: 2002 Sebring lxi convert top rattles on right side [charlessr]
Dec 04, 2009 (1:11 pm)
we have the same issue with our top. Did you ever get an answer?
#99 of 149 Re: 2002 Sebring lxi convert top rattles on right side [menyou1]
Dec 04, 2009 (1:22 pm)
I did not get an answer...but taking a hint from another post...i put some Velcro in the actual cavity (where the pin fits into as weel as a couple of pieces around the outside of that cavity...took the car on the roads around my house where the rattles were most present and guess what..it works.....
now I ( and my b-in -law who also has one) have to find out how to correct where the issue where a portion of the top where it connects to the rear window is pulling away....
#100 of 149 Re: 2002 Sebring lxi convert top rattles on right side [menyou1]
Dec 04, 2009 (1:26 pm)
our vinyl came loose there as well. I super glued it back down and it holds really well. I thought there would be some sort of adj. for the hooks to tighten them up
#101 of 149 Re: 2002 Sebring lxi convert top rattles on right side [menyou1]
Dec 04, 2009 (1:49 pm)
thanks me too but I did not see an adjustment...the black Velcro really works and one can really not see it as an appearance detractor...and , in any case, the absence of noise is worth it..in my case we has some circular pieces of sticky back Velcro the is used to hang pictures and other objects.....I just cut them into halves and placed inside the cavity where the top pin fits..with of course the soft side out....and to ensure that there was not "bumping" from around the pin I placed a couple of pieces on the top of the cavity...works. fine
will try the super glue on the top
#102 of 149 thinking of buying a 2000 jxi
Dec 11, 2009 (7:39 am)
hello... i am thinking of buying a 2000 jxi convertible. has about 88k on it. i kinda would like a general opinion from owners of the car on how it runs and problems around that milage area. honesty good and bad please would be appreciated. thanks all
#104 of 149 Re: thinking of buying a 2000 jxi [manutd1]
Jan 12, 2010 (9:16 am)
I have owned 3 of these ..and although the mileage did not exceed 50K on any ( my wife's cars) I have had no problems, major or minor, with any....so in spite of all of the consumer reports, etc critical comments about the Chrysler convertibles...I have had great experiences...I also had a valiant and dodge polara convertible..I have found them the best for the money...I would suggest you have a local trusted mechanic check the car for the obvious big ticket items...