Sign In Join 



Chrysler Sebring Convertible Top and Sunroof Problems

97 messages,  Last post on Nov 29, 2009 at 3:33 AM

You are in the Chrysler Sebring Forum. Your Host is claires

What is this discussion about? Chrysler Sebring, Convertible, Sedan


Messages Page 9 of 11
1
...
5
6
7
8
9
10
11
Prev
Next
Last
Go To Msg #
Search This Discussion

#74 of 97
Re: Rattling Top [jackieh2] by lmarasca
Jun 20, 2008 (5:33 pm)
Reply

Replying to: jackieh2 (Jun 20, 2008 1:28 pm)

no jackie, its a vinyl top. and we bought it used. with 14 on it. we keep getting it can not be fixed from service dept at the dealership. would the can not be fixed come under the lemon law? like i said, we were told it is characteristic of the vehicle, but anyone i've spoken to has not a rattle in theirs. does your new car rattle.? what really bothers me is no one has even bothered to attemt to look at what the problem might be.
#75 of 97
Re: Rattling Top [lmarasca] by jackieh2
Jun 21, 2008 (5:53 am)
Reply

Replying to: lmarasca (Jun 20, 2008 5:33 pm)

Imarasca: I have a "cloth" top and, no, I have no rattles, squeeks, or such. In fact, my Sebring, Touring model, is unusually quiet for a convertible. Everything works exactly as it should--so far. With only 1800 miles on it in seven months (I'm retired), I don't want to speak too soon. If I could change anything, I'd have selected white. The inferno red is rather macho. This is my third Chrysler convertible, a 1990 LeBaron, a 2001 Sebring Touring, and the new one.
 
Re. the Lemon Law. Here in VA the law says the service dept. has to have made at least three unsuccessful attempts to correct the problem and/or, I'm not sure which, have had the vehicle in their shop for a total of 30+ days. Google your state's dept. of consumer services and navigate to vehicle lemon law. I believe every state has such a law. Be sure to document all the activities with dates, length of stay in the shop, etc. Have you complained in writing to Chrysler Corp. and tried to resolve the issued with them? This is a prerequisite before envoking the Lemon Law.
 
Good luck. Jackie h
#76 of 97
Re: Rattling Top [lmarasca] by ricbra
Jun 22, 2008 (6:07 pm)
Reply

Replying to: lmarasca (Jun 20, 2008 5:33 pm)

Imarasca, I am having the same issue right now! I have a Sebring with vinyl top and it is rattling on the rear right side. I went to the dealer this last week and they checked the noise and told me that the top will be replaced but they didn't have it and they will order and call me to bring the vehicle back as soon as it arrives. Let's see how much time it will take! By the way my car might be one of the first produced in April 2007 and it's 4k miles.
#77 of 97
Re: convertable top adjustment on 01 model [fanmannd] by bigeee
Jun 23, 2008 (12:40 pm)
Reply

Replying to: fanmannd (Apr 24, 2006 8:00 pm)

I am having the same problem. Please let me know if you get a response.
#78 of 97
Re: convertable top adjustment on 01 model [bigeee] by tedebear
Jun 23, 2008 (2:00 pm)
Reply

Replying to: bigeee (Jun 23, 2008 12:40 pm)

I am having the same problem. Please let me know if you get a response.
 
That message was from more than two years ago. You might check one reply link shown below that another owner successfully repaired his with.
 
Sebring Convertible Loose Top
#79 of 97
Re: Rattling Top [ricbra] by ricbra
Jun 29, 2008 (6:25 am)
Reply

Replying to: ricbra (Jun 22, 2008 6:07 pm)

The top on my 2008 was replaced and some stoppers were adjusted and the rattle is gone!
#80 of 97
Adjusting the top by slowhand2
Jul 22, 2008 (4:39 pm)
Reply
How do i adjust my convertable top...1997 sebring jxi
#81 of 97
Needed '01 drivers side conv. latch by niki2kids
Sep 27, 2008 (2:22 pm)
Reply
I am a fulltime student and just purchased my first conv. used. I am looking for a used top latch for my '01 sebring LX. Anyone know where to go for good used parts? I went to my local dealership, but the part is almost 300.00 without labor and as I am a poor student I would rather notpay that much.*L*
Thanks for any help.
P.S.
Other than the Latch, I am just loving the car.
#82 of 97
Re: convertable top adjustment on 01 model [ridhill] by jstuart1
Nov 23, 2008 (10:22 am)
Reply

Replying to: ridhill (Dec 25, 2006 11:52 am)

Thank you for the suggestion. I have been having problems with my top rattling. I took your suggestions and went a step further. I applied the Velcro also on the area where the adjustment screw came in contact with the roof frame. This is located at the first hinged openings from the front side. Since I have a 2004 convertible Sebring I figured wear and tear wore out the padding there. I also applied the same type of Velcro on the rubber grommets over the post that guides the roof into the latches. It appeared that the rubber grommets had worn and the metal post may have been hitting the guide holes.
I have also had problems with the latch pins wanting to work loose because the plastic bearings are worn down. I am fortunate to work at a place that I can have new bearings machined. I will probably wait until spring to do this. I took it for a test drive about an hour ago and no rattles, just squeaking between the weather stripping and the windshield. I can live with that.
Also, I happened to have a strip of Velcro that has the soft side on one side and the ‘hooks’ on the other. It is used to wrap around an extension cord for example. I added that to the Velcro on the metal piece that the latch hooks into just for more tension.
#83 of 97
Re: convertable top adjustment on 01 model [fanmannd] by jstuart1
Nov 23, 2008 (10:34 am)
Reply

Replying to: fanmannd (Apr 24, 2006 8:00 pm)

Refer to #28 & #82

Messages Page 9 of 11
1
...
5
6
7
8
9
10
11
Prev
Next
Last
Go To Msg #
Search This Discussion
To POST a message, please Sign In.

New? Join Now!

Forum Tools

Please sign in.
Email Address:

Password:

Forgot Password?

Search Forums

Enter Keyword(s)

Advanced Search

Browse by Vehicle



View All Vehicles
Advertisement
Ask the Community
See What People Are Asking

Browse by Board

Browse by Topic


View All Topics

Today's Chats

Advertisement