Last post on Jan 28, 2013 at 5:28 PM
You are in the Chrysler Sebring
What is this discussion about?
Chrysler Sebring, Convertible, Sedan
#67 of 99 Another Blower Motor Question. 01 sedan
May 28, 2009 (3:30 am)
Hi all. I have an issue with my fan speeds. 1 & 2 blows virtually nothing, but the fan is running. on 3, it blows a bit harder. Maybe about like it should on 1 or 2. Then on 4 its like a hurricane. Could this be the resistor? The blower is working on speeds 1,2 & 3, but just barely. From the other posts I have read, if it were the resistor then 1, 2, & 3 would be dead and only 4 would blow. Any ideas?
#68 of 99 95 Sebring, Always blows hot air
May 29, 2009 (3:21 pm)
I have a 95 Sebring, the temperature control doesn't seem to change the air coming out the vents at all. It's always hot. Is there a valve that should close off coolant to the heater core? Could it be a vacuum problem with the controls? Is there a flap that should close off the heater core? Any help would be greatly appreciated. Thanks
#69 of 99 2000 sebring convertable
Jun 08, 2009 (10:44 am)
i have a problem where the radiator fan doesnt kick in even whe the AC is on. There is no water in the return line to the radiator. How do you know if its the temp sensor. Even if the fan motor was blown there should be water flowing thru the line. I replaced the thermostat. any suggestions
#70 of 99 A/C, Heater Blower Resistor problem
Jul 23, 2009 (7:10 am)
I've got what appears to be the same problem with my 2008 Sebring Touring sedan with 16K miles, but in my case it's the high speed setting that works intermittently. Sometimes I have to play with the control knob to get the high speed to work and sometimes it will turn off by itself where I then have to jiggle the knob to get it to work.
Since it's so intermittent I don't want to take it to the dealer just yet.
#71 of 99 Fan/ Blower Switch Resistor
Aug 07, 2009 (6:45 pm)
Could you please tell me where or which website I can buy the Fan/Blower Switch Resistor for the Chrysler Sebring 2001 sedan with the price around $12 to $24 that you have told above?
Tks in advance
#72 of 99 Heating / cooling blower fan
Sep 07, 2009 (10:38 am)
2002 Chrysler sebring sedan - Heating cooling fan is oscillating. The air coming out of the vents will stop then come back on after a few moments. This will happen in all speed settings. While in the lowest speed the air seems to oscillate down to near nothing then back to speed settings? Seems kind of like a fan going out or ??
Sep 25, 2009 (7:40 pm)
can anyone tell me the right way to hot wire the fan with either a toggle switch or directly to the ignition or starter please in detail im not to mechanical incline thanks
#75 of 99 Re: Another Blower Motor Question. 01 sedan [hawker95]
Oct 01, 2009 (1:34 pm)
This is the blower motor resistor going. I've had to replace this twice on my 02 Sebring. The latest ones are made better than the previous types so it shouldn't go anymore. The only issue you may have with the newer resistors is that you will have to cut a larger hole to fit it in as they've changed the size slightly.
#76 of 99 2002 sebring cooling fan
Oct 03, 2009 (11:55 am)
2002 Sebring sedan, just had blower motor replaced then it stopped working. Back to the shop this time they replaced resistor,. Now the AC works but the damper opens and closes at will shifting the ac from floor level to face level to defrost at will? any suggestions.