You are here:
Forums
Coupes & Convertibles
Chrysler Sebring
Chrysler Sebring Brake Problems

96 messages, Last post on Aug 12, 2009 at 3:36 AM
You are in the Chrysler Sebring Forum. Your Host is claires
| My car was in the shop [Fitzgeralds Auto Mall where I in fact purchased the car]for brake problems....several times to the extent I wrote BBB regarding same. I was reimbursed however, this situation cropped up since there [btw oil was put in the car Sprint prior to being at the dealership] I am finding a lot of problems with the 2.7 motor-type at google-even class action suits. another site autosafety.org is attempting to have Chrysler extend the warranty. I still have a Powertrain warranty [7years/70]but they are not honoring it per above. I have found on the net several stories very similiar. In fact when I called DOT Transportation saftey commission, I was advised there are so many problems with this engine they should recall it. I am becoming a consumer advocate re: this motor-it is a safety issue as well as economical-the complaints are similiar in nature-low milage; gunked oil-engine fails-dealership/chrysler puts onus on the owner-usually with 36,000 milage used. btw-I finally got an address in Elkridge for the zone manager but I am not feeling very positive. | |
| Any Sebring sedan owners have problems with turning and braking crunching noises in the front? How did you fix it? Service hears it....can't fix it. | |
|
Since I bought my Sebring, sometimes when I come to a stop and brake, the car jets forward. This has happened at Stops and is very dangerous. When I take it back, they say because they cannot replicate the problem, they cannot fix it. Has anyone had this problem? I never heard of not being able to check on a problem through being told what the problem is. This is the second time I have it in and they are saying the same. "We can't replicate the problem, therefore we cannot diagnose and fix it." Is that true?
|
|
|
|
|
Replying to: daleastar (Apr 18, 2005 10:30 am)
|
|
|
|
|
Replying to: newconvert (Apr 20, 2005 12:04 pm) |
|
I recently changed the brake pads and turned the rotors on my Sebring and now the braking is almost zero. Help! Is there something that I missed, never had this problem when changing brake pads/rotors on other cars. If anyone has experienced this please let me know how you fixed it! Thanks
|
|
|
Replying to: sidonie (May 16, 2005 5:31 am) |
|
hi i have a problem with my brake lights they dont come on. Now as far as i know i did check the fuses in the fuse panel in the engine compartment. Does any one know of any other possibilitys? I have also checked all the bulbs to!! please help!!!
|
|
|
Replying to: jforzetti (Jun 04, 2005 11:57 am) Hope this helps. Mykee |
|
|
Cause i'm the proud owner of an '01 Sebring Coupe (with the 5 speed) ... with over 40,000 miles and almost no problems . Had an issue with both rear wheel bearings ... the left one was replaced at 25k (under warranty) and the right one just went (cost my ~$300) ... and for some reason, the front rotors have warped twice ... once they cannot be "turned" i will replace with bigger, aftermarket ones. But other than those 2 things, the coupe's been great.
|
|
You are here:
Forums
Coupes & Convertibles
Chrysler Sebring
Chrysler Sebring Brake Problems
New? Join Now!
Forum Tools
Search Forums
Browse by Vehicle
2010 Chrysler Sebring



Browse by Board
Browse by Topic
Today's Chats