You are here:
Forums
Coupes & Convertibles
Chrysler Sebring
Chrysler Sebring Audio System Questions

48 messages, Last post on Oct 17, 2009 at 11:48 AM
You are in the Chrysler Sebring Forum. Your Host is claires
|
|
|---|---|
| When a radio will only work intermitly you most likely have a ground or power issue. This can be fixed by finding the power/ground wire on the wires on the rear of the radio. Start with the ground wire (usually black) and splice into it and run to a good known ground (metal under the dash or firewall,and do the same for the power on except you will connect this to a power source that powers up with the key in the on position ( you will need a 12 volt test light for this) this will fix any power or ground issues if not you will have to replace the radio unit. This is not a difficult repair but if you are unsure any mechanic can do this in 30 minuites or so. | |
|
Replying to: mikebuckley (Nov 27, 2007 9:57 pm) |
|
|
|
|
Just bought a 2008 Sebring Touring with the Standard 6 CD/MP3/Sat radio....I cannot see any way to go to random play....am I missing something? Surely, it has this feature...but not covered in the manual...and can't find anything via Google or Yahoo.... Also, anyone used a Data DVD for MP3s? Manual implies it will work...but also says there is a file limit of just 256 files...is this total file limit or is it per folder? I can usually get about 1,000 MP3s on a data DVD.... Anyone know of more info on this radio besides the standard car manual? Thanks! Robert |
|
| I bought a new radio and am trying to install it into my 97. i have full power to the radio and it is working, but am getting no sound through the speakers. what do I need to do. | |
|
I had a dead battery, got it jumped and now have no sound coming from the radio, the radio powers on, any ideas? and how to fix them? |
|
|
|
|
I have about 75% of the equipment on hand and am just waiting for the rest to come in before I start. First I will be putting a Alpine IVA-D310 single din head unit and a center channel speaker in the double din opening... what adapter have other owners used to install a double din head unit? Has anyone installed a din head unit as well as a Alpine SBS-05DC center channel speaker and if so how did you go about it? Has anyone used the Scosche CR1291 dash kit? (see link below) It is two brackets instead of a complete box frame. I suspect that this may work better than the box frame for what I am trying to accomplish. And what harness adapter do you use? If anyone has installed an Alpine TV head unit please give the part number so I can l look to see if that will work for my install. The IVA-D310 is a DVD/TV head unit and I have heard that there are issues with installing a TV head unit in the 07 & 08 Sebring... has anyone encountered any wiring problems while attempting to install a TV head unit in either of these years models? If so what was it and how did you end up solving the problem? I will be replacing the stock speakers in the front doors and in the rear deck. 6.5" coaxial Focal's in the doors and 6"x9" Boston Acoustics in the deck. These will be driven by a Rockford Fosgate T400-4 amp. As well as 2 Boston Acoustics G2 12" dual voice coil subs in a custom designed ported box in the trunk driven by a Sony XM-SD51X running at 2 Ohm putting out 500W. I will be running the amps thru a dual 1 Farad capacitor set-up from Audiobahn. All power and ground connections will be thru 1/0 AWG and interc">link titleonnections will be 16 AWG wires... all copper is 100% pure crystal-oxygen free. When the time comes to replace the battery it will be replaced with an Optima and the alternator will be replaced with a high output model for high amp usage. Distribution block and positive battery terminal will be gold plated and digital displayed to monitor current and fuse blocks will also be gold plated. If anyone has any input or suggestions please feel free to! I look forward to any help that anyone can give1 Thanks for taking the time to look this over ! ~Fatalii |
|
|
|
|
Replying to: tedebear (Sep 29, 2007 4:42 pm) Did you find a solution to enable the DVD player in Drive position, If so can you help me to do it . Thank you
|
|
|
Replying to: bitburger1 (Oct 14, 2009 11:26 am) There are several aftermarket hardware devices that you can install to enable DVD in motion. The one I recommend is called ALLGIG-USB (do a Google search). I don't work for them, I just surf many MyGIG forums and the feedback I've read from ALLGIG owners is very positive. Apparently they have great customer support. There was once a bug in one release of the MyGIG without nav (REN) where you could press a combination of buttons and get it to play a DVD while in motion. It was fixed on later releases but you might be able to find a video of how to do it if you do a Google search. |
|
You are here:
Forums
Coupes & Convertibles
Chrysler Sebring
Chrysler Sebring Audio System Questions
New? Join Now!
Forum Tools
Search Forums
Browse by Vehicle
2010 Chrysler Sebring



Browse by Board
Browse by Topic
Today's Chats