Sign In Join 



Chrysler Sebring Audio System Questions

48 messages,  Last post on Oct 17, 2009 at 11:48 AM

You are in the Chrysler Sebring Forum. Your Host is claires

What is this discussion about? Chrysler Sebring, Convertible, Sedan


Messages Page 5 of 5
1
2
3
4
5
Prev
Next
Last
Go To Msg #
Search This Discussion

#39 of 48
Re: Moving single songs from an iPod to the MyGig. [bustabubba] by tedebear
Jun 04, 2008 (11:00 am)
Reply

Replying to: bustabubba (Jun 03, 2008 10:11 pm)

Is there any way for me to transfer selected song files from my iPod? I only seem to be able to copy the entire playlist using a USB connection.
 
The only options for adding music to the hard drive are via disc or USB flash drive. You don't have to copy the entire playlist from a USB device.
 
Copying audio files using the USB port:
 
1. Lift USB cover and insert the USB device. Select MY MUSIC.
2. Select IMPORT MUSIC FILES. Select FROM USB.
3. Select individual files or ALL. Select DONE to begin copying.
 
There's a demo of this on the Chrysler MyGIG website. Click on "Copy Audio Files" on the left side of the screen.
#40 of 48
Re: cd player [pkgman2] by djdrummernick
Aug 02, 2008 (3:41 pm)
Reply

Replying to: pkgman2 (Jun 11, 2007 10:03 pm)

buy kenwood cd player best buy instaled 129 ok lol easy
#41 of 48
Easy radio fix by 41coupe4me
Oct 04, 2008 (2:40 pm)
Reply
When a radio will only work intermitly you most likely have a ground or power issue. This can be fixed by finding the power/ground wire on the wires on the rear of the radio. Start with the ground wire (usually black) and splice into it and run to a good known ground (metal under the dash or firewall,and do the same for the power on except you will connect this to a power source that powers up with the key in the on position ( you will need a 12 volt test light for this) this will fix any power or ground issues if not you will have to replace the radio unit. This is not a difficult repair but if you are unsure any mechanic can do this in 30 minuites or so.
#42 of 48
Re: Setting the clock [mikebuckley] by drex936
Nov 23, 2008 (9:10 am)
Reply

Replying to: mikebuckley (Nov 27, 2007 9:57 pm)

my clock is on the navigation screen, will mikebuckley's clock re-set solution work for this set-up?
#43 of 48
2008 Sebring - Standard Radio - Random Play? by clearlyrobert
Dec 02, 2008 (7:50 pm)
Reply
Just bought a 2008 Sebring Touring with the Standard 6 CD/MP3/Sat radio....I cannot see any way to go to random play....am I missing something? Surely, it has this feature...but not covered in the manual...and can't find anything via Google or Yahoo....
 
Also, anyone used a Data DVD for MP3s? Manual implies it will work...but also says there is a file limit of just 256 files...is this total file limit or is it per folder? I can usually get about 1,000 MP3s on a data DVD....
 
Anyone know of more info on this radio besides the standard car manual?
 
Thanks!
 
Robert
#44 of 48
No sound in speakers by nkephart
Jan 10, 2009 (1:20 pm)
Reply
I bought a new radio and am trying to install it into my 97. i have full power to the radio and it is working, but am getting no sound through the speakers. what do I need to do.
#45 of 48
99 Sebring Convertible, NO sound from radio by qballn92
Jan 11, 2009 (8:12 am)
Reply
I had a dead battery, got it jumped and now have no sound coming from the radio, the radio powers on, any ideas?
 
and how to fix them?
#46 of 48
Planing to install 5.2 stereo system in 08 Sebring Sedan... by 08_slvr_sea
Oct 12, 2009 (1:05 pm)
Reply
I have about 75% of the equipment on hand and am just waiting for the rest to come in before I start. First I will be putting a Alpine IVA-D310 single din head unit and a center channel speaker in the double din opening... what adapter have other owners used to install a double din head unit? Has anyone installed a din head unit as well as a Alpine SBS-05DC center channel speaker and if so how did you go about it? Has anyone used the Scosche CR1291 dash kit? (see link below) It is two brackets instead of a complete box frame. I suspect that this may work better than the box frame for what I am trying to accomplish. And what harness adapter do you use? If anyone has installed an Alpine TV head unit please give the part number so I can l look to see if that will work for my install.
 
The IVA-D310 is a DVD/TV head unit and I have heard that there are issues with installing a TV head unit in the 07 & 08 Sebring... has anyone encountered any wiring problems while attempting to install a TV head unit in either of these years models? If so what was it and how did you end up solving the problem?
 
I will be replacing the stock speakers in the front doors and in the rear deck. 6.5" coaxial Focal's in the doors and 6"x9" Boston Acoustics in the deck. These will be driven by a Rockford Fosgate T400-4 amp. As well as 2 Boston Acoustics G2 12" dual voice coil subs in a custom designed ported box in the trunk driven by a Sony XM-SD51X running at 2 Ohm putting out 500W. I will be running the amps thru a dual 1 Farad capacitor set-up from Audiobahn. All power and ground connections will be thru 1/0 AWG and interc">link titleonnections will be 16 AWG wires... all copper is 100% pure crystal-oxygen free. When the time comes to replace the battery it will be replaced with an Optima and the alternator will be replaced with a high output model for high amp usage. Distribution block and positive battery terminal will be gold plated and digital displayed to monitor current and fuse blocks will also be gold plated.
 
If anyone has any input or suggestions please feel free to! I look forward to any help that anyone can give1 Thanks for taking the time to look this over ! ~Fatalii
 
#47 of 48
Re: Chrysler Sebring MyGIG Multimedia Infotainment System [tedebear] by bitburger1
Oct 14, 2009 (11:26 am)
Reply

Replying to: tedebear (Sep 29, 2007 4:42 pm)

Hello,
 
Did you find a solution to enable the DVD player in Drive position, If so can you help me to do it .
 
Thank you
#48 of 48
Re: Chrysler Sebring MyGIG Multimedia Infotainment System [bitburger1] by tedebear
Oct 17, 2009 (11:48 am)
Reply

Replying to: bitburger1 (Oct 14, 2009 11:26 am)

Did you find a solution to enable the DVD player in Drive position, If so can you help me to do it .
 
There are several aftermarket hardware devices that you can install to enable DVD in motion. The one I recommend is called ALLGIG-USB (do a Google search). I don't work for them, I just surf many MyGIG forums and the feedback I've read from ALLGIG owners is very positive. Apparently they have great customer support.
 
There was once a bug in one release of the MyGIG without nav (REN) where you could press a combination of buttons and get it to play a DVD while in motion. It was fixed on later releases but you might be able to find a video of how to do it if you do a Google search.

Messages Page 5 of 5
1
2
3
4
5
Prev
Next
Last
Go To Msg #
Search This Discussion
To POST a message, please Sign In.

New? Join Now!

Forum Tools

Please sign in.
Email Address:

Password:

Forgot Password?

Search Forums

Enter Keyword(s)

Advanced Search

Browse by Vehicle



View All Vehicles
Advertisement
Ask the Community
See What People Are Asking

Browse by Board

Browse by Topic


View All Topics

Today's Chats

Advertisement