Last post on May 24, 2009 at 5:05 PM
You are in the Subaru B9 Tribeca
What is this discussion about?
Subaru B9 Tribeca, Performance Mods, SUV
#140 of 148 Re: Door edge molding Protectors [flgirlaol]
Jan 13, 2009 (8:38 pm)
if dings in your door are the issue, look at body side molding, I found aftermarket kit at mycarworx.com , they have color match and just matte black. I haven't put it on yet, but that would help avoid people dinging your door.
#141 of 148 Door Edge Moldings
Feb 07, 2009 (3:00 pm)
Here are some pictures of the Tribeca door moldings I bought. I had a guy come out to first fix the dings that were in my doors then he applied these easy moldings. Hopefully they'll keep the dings away. They don't look too bad either!
Hopefully these pics will come up
#142 of 148 Re: Door Edge Moldings [flgirlaol]
Feb 09, 2009 (10:14 am)
What stands out to me are those mesh grille inserts - very nice with that black.
#143 of 148 Re: Door Edge Moldings [flgirlaol]
Feb 09, 2009 (10:19 am)
I suspect those will help for larger vehicles, but not the smaller ones where the contact point is low on your Tribeca's door. I cannot quite tell if there is a factory-mounted strip low on the door panel, but if not, you may end up with dings continuing in that area. It looks nice, though.
#144 of 148 Re: Door Edge Moldings [xwesx]
Feb 09, 2009 (12:10 pm)
Thanks for the compliments. I put those moldings where I'm always getting dings. From big SUVs!!!
This was my second time I've had to get ding removal and they are always high up. Seems like everyone here in South FL loves big old cars.
#145 of 148 Re: Door Edge Moldings [flgirlaol]
Feb 09, 2009 (6:39 pm)
You should be good to go, then! I notice that trucks and (large) SUVs tend to be the door-ding culprits around here (Alaska) as well. Those of us who drive small cars are far more considerate.
Feb 28, 2009 (6:41 am)
We just purchased a new 2008 Tribeca (2/26/09) and so far are very happy. We take several road trips per year and like to have a clothes hanging rod across the rear end of the cargo area. There are what appear to be access plugs near the hatch opening in a position that would allow hanging of a rod.
Do these "pop" out? If so, what's behind them?
#147 of 148 iso non oem crossbar for 2008 tribeca roof rail
Apr 25, 2009 (8:01 am)
have a 2008 tribeca with roof rail installed
where can i get best price for a set of crossbars for this model
please reply with cc to netcommuner at gmail dot com
May 24, 2009 (5:05 pm)
Any suggestions as to where to pick up unswitched 12 volt power in or near the center console? The existing accessory outlets have power available only when the ignition switch is on or in "accessory" positions. This is a pain.
I found the fuse that supplies the outlets but the power goes through a relay between the fuse and the outlet that interrupts power when the ignition switch is not on.