Sign In Join 



Chevrolet Malibu Electrical/Lighting

186 messages,  Last post on Sep 23, 2009 at 10:20 AM

You are in the Chevrolet Malibu Forum. Your Hosts are pat & karens

What is this discussion about? Chevrolet Malibu, Lights, Electrical, Sedan


Messages Page 15 of 20
1
...
12
13
14
15
16
17
18
...
20
Prev
Next
Last
Go To Msg #
Search This Discussion

#132 of 186
Re: 2000 Malibu ower need help [lliu] by dnadle
Sep 30, 2007 (1:26 pm)
Reply

Replying to: lliu (Aug 30, 2007 6:28 am)

Hi,
 
I have the identical problem (already swapped the computer (ECM) with no success). Have you gotten a response to your post? Thanks much in advance for any help on this.
 
Dave
#133 of 186
04 Classic ignition switch coming out of car by 04cad
Sep 30, 2007 (4:18 pm)
Reply
Daughter's 04 Malibu Classic has an ignition switch glitch...... Occasionally when she turns the ignition key off, the switch assembly pops out of the car. I talked to the dealership who said something about a keeper up under the dash. I am not sure how this would work since the ignition switch is sort of a module that slips into the hole in the dash and there are four prongs that fit into four holes for the electrical connections. It isn't a problem to stick it back in, but why does it come out and what is supposed to hold it into the dash? thanks
#134 of 186
Re: 04 lt brake light and cruise control issues [mom2drew07] by e2helper
Oct 01, 2007 (5:49 pm)
Reply

Replying to: mom2drew07 (Sep 25, 2007 2:18 pm)

It sounds like your brake apply position sensor calibration might need to be reset. Unfortunately this is something only the dealer can do with service tool.
#135 of 186
Malibu Electrical Problem by egarrido
Dec 11, 2007 (9:52 pm)
Reply
Recently my malibu 98 2.4 gave a faulty engine,I change a lot of parts,and continue the same ,today we notice that when we unscrew the coil cap cover the problem desapear and the car beguins working as new,Is there any electrical part,ground or any thing related to the coil fuctioning,or the ignition module that when the cap touch ground give that engine fault?I am mad with this ,please anybody who has had this problem,plese give a little help,THANK YOU.
#136 of 186
Malibu Electrical problem - Service Vehicle Soon by sgz1
Jan 12, 2008 (9:35 am)
Reply
Recently my daughters 2004 Malibu Classic has been having the following problem. When the ignition is turned on, there is a delay from the engine start until the dash instruments start working along with the radio. Has anyone else experienced this problem? This has started at about the same time the Service Vehicle Soon light started coming on at times.
#137 of 186
Re: 2000 Malibu ower need help [lliu] by caddev
Jan 16, 2008 (5:36 pm)
Reply

Replying to: lliu (Aug 30, 2007 6:28 am)

I was hoping someone could help me figure out my 2000 Malibu!!! It is having a complete melt down, well ok, I am over this car. Each time I start the car it is something different and in different combinations. It all includes: no daytime running lamps, the heat will not work, the gas gauge and oil pressure gauges will not work, the engine light comes on time to time or the service engine light soon comes on time to time. Sometimes they all happen at the same time then the next time maybe just the gauges and the engine light. I was hoping someone had an idea of where to start with this car, besides the junk yard. I constantly have problems with the brake light and back turning signals burning out. Please help!!
#138 of 186
Turn Signal Keeps Clicking by johngod
Jan 28, 2008 (12:36 pm)
Reply
I'm new here, so please bare with me.
I have a 2001 Chevy Malibu.
The turn signal keeps tapping,
 even when the signal is off.
The light doesn't light, only the noise.
Any Help.
Thanks John
#139 of 186
Re: Turn Signal Keeps Clicking [johngod] by 03maliboo
Feb 19, 2008 (1:45 pm)
Reply

Replying to: johngod (Jan 28, 2008 12:36 pm)

I had the same exact problem with my 03 so I ripped the dash apart and accidentally broke the switch. Went to the dealer, bought a new one, put it in and now nothing works at all...I'm assuming I blew a fuse or something but maybe someone can shed some light?
#140 of 186
Re: Turn Signal Keeps Clicking [03maliboo] by pao
Feb 21, 2008 (4:29 am)
Reply

Replying to: 03maliboo (Feb 19, 2008 1:45 pm)

not sure about the older models....but the 04 and beyond are all controlled by the ECM I beleive...it may require a reflash to the control module.....

Messages Page 15 of 20
1
...
12
13
14
15
16
17
18
...
20
Prev
Next
Last
Go To Msg #
Search This Discussion
To POST a message, please Sign In.

New? Join Now!

Forum Tools

Please sign in.
Email Address:

Password:

Forgot Password?

Search Forums

Enter Keyword(s)

Advanced Search

Browse by Vehicle



View All Vehicles
Advertisement
Ask the Community
See What People Are Asking

Browse by Board

Browse by Topic


View All Topics

Today's Chats

Advertisement