Ask the Car People.SM


Pontiac Grand Am Security Passlock Problems

1230 messages,  Last post on Jun 14, 2013 at 12:34 PM

You are in the Pontiac Grand Am Forum.

What is this discussion about? Pontiac Grand Am, Security System, Sedan

    
Go to NHTSA to file a safety complaint.
Or call Monday-Friday (8 am to 8 pm ET) (888) 327-4236 TTY: (800)424-9153
 
    For those experiencing the security passlock problem, please see long-time member lovemygrandam's GM Security Passlock Fix tutorial.

Messages Page 88 of 123

#870 of 1230 Re: 1994 Pontiac Grand Prix SE 3.1 V6 138,000 mi. [matrixsc] by lovemygrandam

Aug 27, 2010 (6:34 am)

Replying to: matrixsc (Aug 26, 2010 9:20 pm)
This is a very good suggestion. Many times, the Passlock problem arises because after years of service, metal filings build up around the magnet that is used to activate the hall effect switch in the ignition module. I actually helped someone temporarily relieve a Passlock problem on an Alero by blowing high pressure air into the ignition key opening, thus cleaning the filings away from the magnet.
It is also possible to fix the problem by removing the lock cylinder and cleaning it out with a solvent and shop air. Just remember that you need to get all the metal filings away from around the magnet.
There is a post in this thread that tells you how to remove and clean the lock cylinder. It's worth your time to go through all the posts to find it. Good luck.

#871 of 1230 Re: Any ideas for this situation... [milwrig] by milwrig

Aug 30, 2010 (4:40 pm)

Replying to: milwrig (Aug 25, 2010 5:31 pm)
Follow Up question and steaming mad- So I broke down and took it to a dealer- explained what I had done already- after 3 days he calls me and says that it is the ignition switch- which I just replaced and is charging me $407 what can I do? Please help.........

#872 of 1230 clean the ignition switch by tommyo1

Aug 30, 2010 (5:34 pm)

Not sure if my eyes are starting to show their age but I skimmed over this long thread to try and find that posting on how to take out the ignition switch and clean it. I can't seem to find it... Does anyone happen to know where it went?
 
Thanks....

#873 of 1230 Re: Any ideas for this situation... [milwrig] by nobullchitbids

Aug 30, 2010 (8:28 pm)

Replying to: milwrig (Aug 30, 2010 4:40 pm)
When is everyone going to realize that GM dealers are running a racket on these PassLock problems? The silliness of it all is reflected by prices all over the place in terms of what it takes to make a claimed fix. I've heard every number under the sun from $189.95 to almost $800 -- every dealership has a different price for something that really costs less than $5 and a half hour of work!
 
Tell the dealer that it cannot be the ignition switch, that you just replaced the ignition switch, that he needs to hire a new head mechanic, and that you want your car back. If he's recalcitrant, threaten him with a lawsuit for civil fraud (that might help) or report him to your state "lemon law" administrator.
 
Then, go back in this thread and find the entries re resetting the PassLock codes, bridging the system with a resistor, or cutting it out entirely by installing a Radio Shack SPST switch for $1.99. That's what I did, and my car has not failed to start since (3.5 years).

#874 of 1230 Re: clean the ignition switch [tommyo1] by lovemygrandam

Sep 03, 2010 (7:34 pm)

Replying to: tommyo1 (Aug 30, 2010 5:34 pm)
Tommy01,
That post is somewhere before post 599.

#875 of 1230 Re: Any ideas for this situation... [nobullchitbids] by milwrig

Sep 05, 2010 (9:43 am)

Replying to: nobullchitbids (Aug 30, 2010 8:28 pm)
Yeah it sure seems like it- I ended up being told that the switch I installed was defective- which is why I was having problems after I installed it. They replaced the switch and charged me 250 bucks for labor (which was bull because I already had the radio out and the lock removed- all they did was unplug it and put a new one in and all they did was put the lock back) 150 for the switch which was 50 more than the parts store. I took the switch back to the parts store, got my money back and turned in all the dealer paperwork to them to test the switch and possible get some money back from them for selling me a defective part that cost me more money. If it was defective and they fork over some store credit I'll gladly sing their praises... I'll continue with this later. Thanks to all

#876 of 1230 Re: clean the ignition switch [lovemygrandam] by tommyo1

Sep 05, 2010 (10:13 am)

Replying to: lovemygrandam (Sep 03, 2010 7:34 pm)
Thanks so much lovemygrandam; I will locate it this afternoon. I'm going to tinker around with it before the cold winter season sets in here in Massachusetts.
Thanks again my friend...

#877 of 1230 Re: clean the ignition switch [tommyo1] by lovemygrandam

Sep 05, 2010 (6:35 pm)

Replying to: tommyo1 (Sep 05, 2010 10:13 am)
Tommy,
The post is #59, but unfortunately, the links on that post don't work any more. When I first read the post, there were photos showing the various parts of the ignition switch after disassmebly, and how to clean out the fine metal filings and put it back together. Those links are now empty.
Here is a photo of my dash board, with the radio bezel removed.

Note that there are two hex-head screws above and below the ignition switch, and slightly to the right of the centerline of the switch. These hold the switch in place. I think you can remove them and slide the switch assembly out through the radio hole. ">

#878 of 1230 same passlock problem? by poppyken1

Sep 23, 2010 (6:55 pm)

2005 grand am start problem same as all above.. Ihave no interior lights or other dash gauge functions.changed bcm still nothing. engine cranks buy wont start need help thanks

#879 of 1230 Re: same passlock problem? [poppyken1] by burdawg

Sep 24, 2010 (9:24 am)

Replying to: poppyken1 (Sep 23, 2010 6:55 pm)
"Ihave no interior lights or other dash gauge functions" So the security light is not coming on and flashing?

Messages Page 88 of 123

To POST a message, please Sign In.

Advertisement

Browse by Category

Browse by Vehicle
   View All Vehicles

Browse by Board
Browse by Topic
View All Topics

Edmunds Community

Advertisement