You are here: Forums Wagons Chrysler Pacifica Chrysler Pacifica Maintenance & Repair Chrysler Pacifica Transmission Problems

Chrysler Pacifica Transmission Problems

742 messages,  Last post on Nov 20, 2009 at 5:32 AM

You are in the Chrysler Pacifica Maintenance & Repair Forum. Your Host is kcram

What is this discussion about? Chrysler Pacifica, Transmission, Wagon

Messages Page 70 of 75 1 ... 67 68 69 70 71 72 73 ... 75 Prev Next Last

Go To Msg # Search This Discussion

#683 of 742 Re: Hard shifting into 2nd gear [rhollis] by farout May 22, 2009 (4:13 pm)
Replying to: rhollis (May 22, 2009 4:05 pm) I was saying that in a joking way. Howerver I have heard of a person getting hit against a wall in just one instance just as I warned against.   I remember you got your money back, or some of it on a PAC, what is your ride now? I sure hope you are having better luck with the new ride.   farout Replies to this message: rhollis (May 23, 2009 3:56 am)
#684 of 742 Re: Hard shifting into 2nd gear [farout] by rhollis May 23, 2009 (3:56 am)
Replying to: farout (May 22, 2009 4:13 pm) Years ago when vehicles had points and distributors, a friend of mine was tuning up his tow truck. He tapped the remote starter buttom to locate the timing mark and the next thing he knew he was being hauled off to the hospital. The truck was in gear and lurched forward pinning him against a work bench. He did not lose any vital parts, but walking is not as easy as it used to be.
#685 of 742 Re: Hard shifting into 2nd gear [brusterm] by kims3 Jul 16, 2009 (11:16 am)
Replying to: brusterm (May 18, 2009 4:37 am) I have an 04 with 150K miles on it...I was having the same issue as you stated and I took it to a mechanic and my upper and lowe motor mounts were broken. The mechanic had a hard time finding them as Chryslers situation. No one wanted to sell the parts. It was not cheap to fix...it cost about 400 for the top ones and another $400 for the bottom ones. It was so bad my engine was rubbing on the firewall!! Replies to this message: rhollis (Jul 17, 2009 5:27 am) Biggd1999 (Jul 19, 2009 6:58 am)
#686 of 742 Re: Hard shifting into 2nd gear [kims3] by rhollis Jul 17, 2009 (5:27 am)
Replying to: kims3 (Jul 16, 2009 11:16 am) My car went back to Chrysler over a year ago. I loved the car but was extremely unhappy with it. The '06, which mine was, and the 04' are different cars in many respects. My motor mounts, right strut, steering rack and sway bar bushings were all replaced to resolve a clunk. None of this made any difference. My daughter brought in her '05 recently (I am in the business) for an identical clunk. I replaced the sway bar links and it was gone. If Chrysler had done that, I might still be driving my Pacifica. I do not know what the problem was but they seem to keep their techs from thinking. Replies to this message: Biggd1999 (Jul 19, 2009 6:58 am)
#687 of 742 Re: Hard shifting into 2nd gear [rhollis] by Biggd1999 Jul 19, 2009 (6:58 am)
Replying to: rhollis (Jul 17, 2009 5:27 am) Well I finally couldn't take it any longer.. the clunking and the transmission was getting worse and was afraid of getting stuck with a huge repair bill so as of Friday I now own a '09 Charger SXT.. I absolutely LOVE it.... It doesn't have all the bells and whistles the Pac had but I will gladly trade that all for a mechanicaly sound car that doesn't vibrate and clunk... I wish you all good luck with your Pac's...
#688 of 742 front motor mount by 07_pacowner Aug 14, 2009 (3:25 pm)
If anyone is interested, I have a video of my front motor mount seperating under load. I have been complaining to my local dealer about drivability issues that they say is normal. Pulling to the right, hard shifting, slamming into drive or reverse from park.....normal my ass! I even asked my dealership to check the motor mounts and they said they are fine. Just give me your email address. Replies to this message: farout (Aug 16, 2009 1:55 pm)
#689 of 742 Re: front motor mount [07_pacowner] by farout Aug 16, 2009 (1:55 pm)
Replying to: 07_pacowner (Aug 14, 2009 3:25 pm) 07 pcowner: You need to go to another dealership that knows what the heck they are doing! WHAT YOU DESCRIPE IS 100% FIXABLE! In fact everyone of the issues you speak of except the pulling to the right, I have experienced and had fixed.   Go to a larger more equiped dealer, and this should be resolved easly.   farout
#690 of 742 Re: Hard shifting into 2nd gear [rhollis] by kerri2201 Aug 27, 2009 (8:03 am)
Replying to: rhollis (May 18, 2009 5:01 am) I have a 07 Pacifica - and have been basically chased out of the 2 local dealerships when I have complained about the clunking and the transmission changing hard - my 07 is still under warranty and all they have offered is to change the tie rod - but only the part is covered and we have to pay labour, and for the transmission was a transmission service at 52000 km and yet our book says not until 100000km - what can I do?
#691 of 742 I think I hate my car by hollybarry Aug 27, 2009 (4:19 pm)
Okay, it's brand new. 2008. 5k miles now. I love the car if I'm on the highway but in town? It clunks all the time. Like when I go from park to reverse or when I go from reverse to drive. It makes this awful sounds and jerks a little. Sometimes it does it, too, when I'm coasting along about 30 mph and hit the gas peddle. Clunk.   I've had it to the dealership and of course it doesn't really do it when they're in the car, not very loud anyway. They "updated" the transmission via a computer program but ??   If the gas mileage (14.2) wasn't enough to tick me off the clunking sure is. At $520/month for 6 years I'm gonna be one sad, sad woman.   If anyone can help me I'd really appreciate it!!!!! Replies to this message: farout (Sep 04, 2009 9:32 am) hollybarry (Sep 04, 2009 2:55 pm)
#692 of 742 Re: I think I hate my car [hollybarry] by farout Sep 04, 2009 (9:32 am)
Replying to: hollybarry (Aug 27, 2009 4:19 pm) I hate to say this, but my guess is they are taking advantage of you being of the female gender. That should mean they would treat you better, so listen to you gut is this is the issue. Go directly to to the General Manager or owner of the dealership and tell her or him whats going on with the Pac and ask the GM to help you.   What you are describing is not unheard of. We has to have the torque converter replaced to take care of this problem. The problem I have seen with others is that when they get problems like you have they make a huge mistake. Do not jump to several other dealers until you have gone as far as the dealer will go.   Is the dealer your going to the one who sold the Pac to you> If not that's where you need to go. If you want call 1 800 992 1997 and speak to a customer care rep. That works. Above all do not get snippy or angry or spout off. These dealers hear crap all the time. So be polite, respectful, and tell them you appreciate their help. Always be positive. If all else fails you can ask the Service manager to get the Zone rep involved, these reps have complete power to even buy back you Pac if they can't fix it to your liking.   Oh One other point you did buy this PAC new right? If not you are limited to the dealersships good will. A Chrysler Service Contract (extended warranty) will sometimes pay for it's self. I have bought over 11 new Chrysler products and I have had a service contract on all but the first Plymouth I bought. I learned then I would always buy one. I have never lost money on. The Max Care $ 100. deductable is the best and has more useable things you can use.   Hope this helps, pray before you phone or go in, be calm and peaceful.   justme Replies to this message: hollybarry (Sep 04, 2009 2:55 pm)

Messages Page 70 of 75 1 ... 67 68 69 70 71 72 73 ... 75 Prev Next Last

Go To Msg # Search This Discussion

You are here: Forums Wagons Chrysler Pacifica Chrysler Pacifica Maintenance & Repair Chrysler Pacifica Transmission Problems