Sign In Join 



Chrysler Pacifica Transmission Problems

722 messages,  Last post on Oct 20, 2009 at 11:59 AM

You are in the Chrysler Pacifica Maintenance & Repair Forum. Your Host is kcram

What is this discussion about? Chrysler Pacifica, Transmission, Wagon


Messages Page 69 of 73
1
...
66
67
68
69
70
71
72
73
Prev
Next
Last
Go To Msg #
Search This Discussion

#678 of 722
Re: Best deals on max care warranties? [tlars] by jtg61
Apr 25, 2009 (2:45 am)
Reply

Replying to: tlars (Apr 01, 2009 7:14 pm)

Here is the link to the military offer.
 
www.jeep.com/en/incentives/programs/military/rules.html
#679 of 722
Hard shifting into 2nd gear by brusterm
May 18, 2009 (4:37 am)
Reply
I have an '04 Pac with 130k miles. It has started a problem where it sometimes shifts hard into 2nd gear. After that it is smooth in the upper gears. The mechanic doesn't seem to have an idea yet. Reading through these posts, now I'm worried about motor mounts and transmission fluid. Is there a way to check the motor mounts are good. He checked the trans fluid and the level is OK.
 
Another problem is that it seems to shudder sometimes when going about 60mph. Dropping to 55 or increasing to 65, the shudder will go away. I'm worried these sound like expensive problems....
#680 of 722
Re: Hard shifting into 2nd gear [brusterm] by rhollis
May 18, 2009 (5:01 am)
Reply

Replying to: brusterm (May 18, 2009 4:37 am)

I believe that the majority of the problems were with the 4.0 engine and the 6spd transmission. One way to check the motor mounts is to have someone put the car in gear with their foot firmly on the brake and accelerate while someone else is watching the engine. It if lifts up substantially, you have a motor mount problem.
#681 of 722
Re: Hard shifting into 2nd gear [rhollis] by farout
May 22, 2009 (1:21 pm)
Reply

Replying to: rhollis (May 18, 2009 5:01 am)

DO NOT STAND IN FRONT OF THE VEICHELE WHEN YOU HAVE SOME ONE ACCELERATE THE MOTOR.
#682 of 722
Re: Hard shifting into 2nd gear [farout] by rhollis
May 22, 2009 (4:05 pm)
Reply

Replying to: farout (May 22, 2009 1:21 pm)

I do not believe that is what I said.
#683 of 722
Re: Hard shifting into 2nd gear [rhollis] by farout
May 22, 2009 (4:13 pm)
Reply

Replying to: rhollis (May 22, 2009 4:05 pm)

I was saying that in a joking way. Howerver I have heard of a person getting hit against a wall in just one instance just as I warned against.
 
I remember you got your money back, or some of it on a PAC, what is your ride now? I sure hope you are having better luck with the new ride.
 
farout
#684 of 722
Re: Hard shifting into 2nd gear [farout] by rhollis
May 23, 2009 (3:56 am)
Reply

Replying to: farout (May 22, 2009 4:13 pm)

Years ago when vehicles had points and distributors, a friend of mine was tuning up his tow truck. He tapped the remote starter buttom to locate the timing mark and the next thing he knew he was being hauled off to the hospital. The truck was in gear and lurched forward pinning him against a work bench. He did not lose any vital parts, but walking is not as easy as it used to be.
#685 of 722
Re: Hard shifting into 2nd gear [brusterm] by kims3
Jul 16, 2009 (11:16 am)
Reply

Replying to: brusterm (May 18, 2009 4:37 am)

I have an 04 with 150K miles on it...I was having the same issue as you stated and I took it to a mechanic and my upper and lowe motor mounts were broken. The mechanic had a hard time finding them as Chryslers situation. No one wanted to sell the parts. It was not cheap to fix...it cost about 400 for the top ones and another $400 for the bottom ones. It was so bad my engine was rubbing on the firewall!!
#686 of 722
Re: Hard shifting into 2nd gear [kims3] by rhollis
Jul 17, 2009 (5:27 am)
Reply

Replying to: kims3 (Jul 16, 2009 11:16 am)

My car went back to Chrysler over a year ago. I loved the car but was extremely unhappy with it. The '06, which mine was, and the 04' are different cars in many respects. My motor mounts, right strut, steering rack and sway bar bushings were all replaced to resolve a clunk. None of this made any difference. My daughter brought in her '05 recently (I am in the business) for an identical clunk. I replaced the sway bar links and it was gone. If Chrysler had done that, I might still be driving my Pacifica. I do not know what the problem was but they seem to keep their techs from thinking.
#687 of 722
Re: Hard shifting into 2nd gear [rhollis] by Biggd1999
Jul 19, 2009 (6:58 am)
Reply

Replying to: rhollis (Jul 17, 2009 5:27 am)

Well I finally couldn't take it any longer.. the clunking and the transmission was getting worse and was afraid of getting stuck with a huge repair bill so as of Friday I now own a '09 Charger SXT.. I absolutely LOVE it.... It doesn't have all the bells and whistles the Pac had but I will gladly trade that all for a mechanicaly sound car that doesn't vibrate and clunk... I wish you all good luck with your Pac's...

Messages Page 69 of 73
1
...
66
67
68
69
70
71
72
73
Prev
Next
Last
Go To Msg #
Search This Discussion
To POST a message, please Sign In.

New? Join Now!

Forum Tools

Please sign in.
Email Address:

Password:

Forgot Password?

Search Forums

Enter Keyword(s)

Advanced Search

Browse by Vehicle



View All Vehicles
Advertisement
Ask the Community
See What People Are Asking

Browse by Board

Browse by Topic


View All Topics

Today's Chats

Advertisement