You are here: Forums Sedans Nissan Maxima Nissan Maxima Electrical Issues

Nissan Maxima Electrical Issues

47 messages,  Last post on Sep 21, 2009 at 6:49 PM

You are in the Nissan Maxima Forum. Your Hosts are pat & karens

What is this discussion about? Nissan Maxima, Electrical, Sedan

Messages Page 2 of 5 1 2 3 4 5 Prev Next Last

Go To Msg # Search This Discussion

#8 of 47 Re: Disable window opening [damnyankee44] by dgr008 Jan 17, 2007 (8:26 pm)
Replying to: damnyankee44 (Dec 16, 2006 10:12 am) My 2003 Maxima doesn't have this feature but I wonder if setting the power window lock out button (the one that prevents anyone other than the driver from lowering the windows)might prevent this from happening?
#9 of 47 95 maxima. how to install ignition switch by donniemc Mar 31, 2007 (5:07 am)
My 95 Maxima won't start in hot weather until several turns of the key.I believe(hopefully), that it's the ignition switch. I bought the little harness assembly and am in the process of trying to put it on.My mechanic experience is very limited.I have a couple of things off under the steering column and I have spotted the old harness.It looks pretty simple to change out.Any advice?Do I need to detach the negative cable from the battery?   Thanks, Donnie Replies to this message: masetime (Jun 17, 2007 1:44 pm) mdww (Nov 02, 2008 9:44 am) andy100 (Aug 26, 2009 5:13 pm)
#10 of 47 Re: 95 maxima. how to install ignition switch [donniemc] by masetime Jun 17, 2007 (1:44 pm)
Replying to: donniemc (Mar 31, 2007 5:07 am) Hi Donnie, did you ever figure out the cause of your ignition problem? or how to solve it?   I'm having a very similar problem, but am not sure if it has to do with the hot weather or not. My '97 Maxima has always been stubborn about turning over. It has often not turned over on the first try, but then after I push the brake down or turn the steering wheel and try again it has always started up just fine.    Today it won't budge. It just makes that clicking sound and I see a little pulley move near the engine, but that's it.    Any ideas?
#11 of 47 Power Seat issue by pep59 Jun 22, 2007 (2:54 pm)
I have a '02 GLE that recently the power seat won't move the seat forward or back. The other power adjustments work fine. My guess is it's a bad switch??? any ideas? Replies to this message: liaison (Feb 21, 2008 6:29 pm)
#12 of 47 Check Engine Light by pep59 Jun 22, 2007 (2:58 pm)
Check Engine light came on and I brought it to my mechanic. He used the computer, got an error code and replaced the malfunctioning switch- day later came back on. Everytime he hooks to computer he gets a different error code. Hate to bring to the dealer - theyve screwed me bad in the past and my guy is pretty good. This is the 2nd Maxima that this has happenned. Last one (97) he found a bad wire in the harness. I cant imagine that this would be the case again. Car has only 65K on it. anybody else experience this?
#13 of 47 Nissan daytime light control unit by airzak Jun 25, 2007 (3:32 am)
My left headlight has only high beam. Bulb is OK. wiring diaagram shows that low and high beams get ground from daytime light control unit (canadian version). I cannot find this unit. Can somebody help me?
#14 of 47 Re: sunroof woes [dgr008] by yungmaxboi23 Jul 20, 2007 (3:17 pm)
Replying to: dgr008 (Sep 29, 2006 6:18 pm) Hello I had this same problem with my 03 Maxima after the battery went dead, but it has been about 2 weeks and I try it everyday but it still won"t open for me. So by any chance you know what it was that your mechanic did to get it back working? Also does anyone know where I can get hyper white fog lights for the MAX? Thanx!
#15 of 47 '99 Maxima Electrical (ECM/Harness) Problems by ammorrossa Jul 26, 2007 (8:23 am)
Hi, I need help and advice. My Maxima would not start suddenly about a week ago so I had it towed to a local mechanic. That mechanic couldn't figue it out so I had it towed to another mechanic, and finally I had it towed to the dealer.    After an extensive diagnosis, the Nissan dealer service rep said that the problem is that my main electrical harness had been cut and that my ECM needed to be replaced. Now prior to this current problem, my car was running fine.    So I'm thinking that one of the mechanics previous to the dealer cut the harness because my car probably would not run with the cut harness, right? Anyhow, I need to know my options because my dealer said that the ECM unit is $880 and the harness is $1,800, plus another few senors and with labor, my total cost would be $3,900, which I definately don't have.    What options do I have? Can I buy the ECM and harness somewhere else and have an Electrical mechanic put it in? Is this a difficult job to do? Please help! Any advice would be so appreciated! By the way, for reference, I live in Temple City, CA. Thanks so much for your help!!!
#17 of 47 Remote Key Fobs Won't stay programmed by sherrieg Aug 02, 2007 (5:55 am)
Has anyone had trouble with keeping remote keyless entry fobs programmed. My husband and I have to reprogram them starting every 6 weeks. Now we are having to program them every 3-4 days. Any suggestions? Replies to this message: pat (Aug 02, 2007 9:37 am) sherrieg (Aug 02, 2007 10:39 am) pat (Aug 02, 2007 1:55 pm) and 1 more...

Messages Page 2 of 5 1 2 3 4 5 Prev Next Last

Go To Msg # Search This Discussion

You are here: Forums Sedans Nissan Maxima Nissan Maxima Electrical Issues