Sign In Join 



GMC Jimmy Fuel System

93 messages,  Last post on Aug 17, 2009 at 8:23 AM

You are in the GMC Jimmy Forum. Your Hosts are steve_ & tidester

What is this discussion about? GMC Jimmy, GMC, Fuel System, Truck


Messages Page 10 of 10
1
...
4
5
6
7
8
9
10
Prev
Next
Last
Go To Msg #
Search This Discussion

#91 of 93
Fuel pump problems with 99 jimmy by schwor
Jul 22, 2009 (3:40 pm)
Reply
Hi everyone
 
A week ago truck wouldnt start. Fuel pump would not run.Changed fuel pump....Ran for about a week or so and then stalled again while driving. Had towed and then started again. stalled again....When I play around with the electrical connectors, it will start....Is it the connectors or something else. Thanks!
#92 of 93
Re: Fuel pump problems with 99 jimmy [schwor] by tech1help
Jul 22, 2009 (4:31 pm)
Reply

Replying to: schwor (Jul 22, 2009 3:40 pm)

It is recommended by GM that when replacing the fuel pump you also replace the weather pack connector.GM sells the connector preassembled, You just have to cut and splice. Sometimes the connector pins get worn and become loose. You can tug on the wires and feel if they are loose. I have seen it before where the connector was the problem and not the pump itself. Best of luck
#93 of 93
Heat soak problem by huntertb1
Aug 17, 2009 (8:23 am)
Reply
I have a 93 Jimmy with a 4.3 cmfi. during the summer months this has happened for 3 rd year in a row. It will start perfect in the morning. I can drive it all day long until I shut it off. When I try to restart it, it almost starts then it just turns into a dead crank. It is getting great spark at all plugs. But the fuel rail is no longer getting fuel.
 
I replaced the Temp sensor switch (the one that goes to the computer, not the gauge) I though sure it was telling the engine it was to hot, but that wasn't it.
 
Thing is it has to REALLY cool down to restart, like over night.
 
Now, the other 3 seasons I NEVER have a problem, starts 100% of the time. That's the only reason I still have it.
 
I am thinking oil pressure sending unit, but not sure how to test? Is it possible that when it gets hot it could be failing? If so can I unhook the connector and will it go into limp mode and start?
 
Any ideas on this are greatly appreciated, I am at my wits end with this.

Messages Page 10 of 10
1
...
4
5
6
7
8
9
10
Prev
Next
Last
Go To Msg #
Search This Discussion
To POST a message, please Sign In.

New? Join Now!

Forum Tools

Please sign in.
Email Address:

Password:

Forgot Password?

Search Forums

Enter Keyword(s)

Advanced Search

Browse by Vehicle



View All Vehicles
Advertisement
Ask the Community
See What People Are Asking

Browse by Board

Browse by Topic


View All Topics

Today's Chats

Advertisement