Ford Escape Audiophile Radio & MP3

101 messages,  Last post on Mar 25, 2013 at 10:34 AM

You are in the Ford Escape Forum.

What is this discussion about? SUV

#96 of 101 no display on the radio/cd by jaydee10

Apr 23, 2012 (6:09 pm)

I have a 2006 ford esacpe with q audiophile cd 6 changer am/fm system. I have no display on the screen. Has anyone experienced this problem before

#97 of 101 2010 Ford Escape radio reception by ae7ki_gerry

May 23, 2012 (1:21 pm)

has anyone tried to improve reception of FM / AM by installing a booster..we live 45 miles north of Spokane and reception is patchy of the main Spokane stations

#98 of 101 Re: 2008 escape radio problem [njmazdaguy] by rmielnichuk

May 24, 2012 (9:31 pm)

Replying to: njmazdaguy (Oct 26, 2010 6:13 pm)
This problem is still there and I have talked to Ford and a couple of stereo installation shops and they don't know what is causing this issue. anyone else have any ideas?

#99 of 101 Re: no display on the radio/cd [jaydee10] by dunk20001

Jun 03, 2012 (8:01 pm)

Replying to: jaydee10 (Apr 23, 2012 6:09 pm)
I have a 2006 Limited with the same problem. If I tap the display sharply, in comes on for for a while then shuts down again.
 
I just finished pulling the radio and taking taking the front off. Once the lens is off, you can see the digital display unit. It would appear that there is a loose connection in the top right corner of the display. There is a silvery mark on the inside of the glass similar to what you see on a blown fuse.
 
I found your complaint while googling the code number on the P.C. board, with no luck.
 
May somebody knows if a new board is available, otherwise I guess we'll both be on e-bay looking for new radios.

#100 of 101 2002 Ford Escape CD player by shelcrone

Oct 05, 2012 (5:31 pm)

The 6 CD exchanger did not work when I bought the truck. I've tried fixing it, but it doesn't work. How do I find a single CD player that will work with the radio?

#101 of 101 Re: ford escape radio problems [spudwalker] by dunzung

Mar 25, 2013 (10:34 am)

Replying to: spudwalker (Feb 13, 2012 8:09 am)
I know this is a year old issue. But I just saw this. There is probably a moisture settlement on the SJB and you MAY have to replace the sJB. After replacing the SJB you will have to to a GEM self test which requires a code scanner. You should then fix and reset the problems suggested by the code. This should help.
To POST a message, please Sign In.

Advertisement

Browse by Category

Browse by Vehicle
   View All Vehicles

Browse by Board
Browse by Topic
View All Topics

Edmunds Community

Advertisement