Last post on Jun 16, 2013 at 11:36 AM
You are in the Chrysler 300M
What is this discussion about?
Chrysler 300M, Sedan
This topic covers any issues related to hard starting, no starts, stalling and erratic idling problems.
#83 of 207 99' 300m starting problems
Jun 30, 2010 (8:02 pm)
I recently bought a 1999 chrysler 300m. The first day i had it i drove it well over 200 miles without a problem. The next day i went 2 blocks to the store and it stalled when i put it in park. I got it started and while driving it stalled again. When i got to start it now it does not turn over at all. All interior lights and accessories work. After a couple hours it starts. I take it around the block to see how it runs and it works fine until i park it and shut it off. Then it does not turn over at all again. Can ne one help let me know what exactly it might be causing the problem?
#84 of 207 Re: 99' 300m starting problems [jdgear]
Jul 14, 2010 (8:39 pm)
I am having a similar problem (same make and model) and have had the PCM replace, the crankshaft sensor replaced, the battery and positive cable replaced, but still have starting issues. I took it to another mechanic and he is looking at it now (and I trust him more than I do Chrysler) and is scratching his head over it. I was initially asked about the alarm system and told them I thought it was stock and so they looked at other things. However, when I was looking into things, it reminded me of my daughters truck and similar issues five years ago. It was an aftermarket alarm, but the symptoms were similar, so I'm going to have them look at the alarm system because nothing else is making sense because I'm thinking the system is failing...part of that is because I have noticed the system has occasionally faulted out on me in the last year, so I'm thinking it could be the problem. I'm checking in with my mechanic tomorrow and see what happens with it...
I have been struggling with this for over a month now and it is driving me crazy...
#85 of 207 Same 300M Starting Problem
Aug 12, 2010 (4:58 pm)
Hi JDGear - I'm having the same issue with my 2001 300M. Stalls at idle and then won't start. I took it to the mechanic (after the tow truck driver started it no kidding!!!) and it proceeded to die in front of the mechanic's shop. Battery tested good, lights, gauges all work (leading me to think the battery is okay) but it won't crank or solenoid click. After 30 minutes of dinking around -- it started. We're baffled. Can you tell me what the outcome was on your 300M in order to get it up and running?
Thanks -- and I owe you a beer!
#86 of 207 Re: 2002 300M wont start after 3 attempts [Shananndora]
Aug 13, 2010 (9:48 am)
Can someone tell me what happens to these cars and how do they fix this problem. for real.
I dont want to start hanging parts and guessing, It seems alot of 300 m folks have the same 3 starts and then NO CRANK issue. I have seen no resolution unless I missed it.
I replaced the evaporator core, now I have the same no start problem, It started 3 times dies quickly, now wont crank at all.
#87 of 207 Re: 99 wont start when hot [steveaaaaa]
Aug 13, 2010 (11:28 am)
A possible fix I heard on an auto talk show was when cars get old(er) they require having the intake system cleaned with a system like from your Chrysler dealer. I was beginning to experience stumbling etc. Had that done several years ago and have had no problems with my '99 300M outside of an occasional high RPM upon start-up but goes away to normal idle after a little while. Up to 1700 RPM...
#88 of 207 Re: 99 wont start when hot [dgrams1]
Aug 13, 2010 (11:46 am)
Pardon me but my car WONT START , it worked fine before I took the dashboard apart.
It started 3 times at idle, and quit quickly. Then after 3 times restarting it will no longer even crank with hte key.
I can get it to crank over by jumping across the start relay, but it will not run, just cranks.
This 2000 300 m will NOT TURN OVER using the ignition key.
Wont work with the remote start system either.
Wished I could disable it to be sure ther eis no conflict.
I removed the intake a yr ago and cleaned it while doing head gaskets.
I left the battery unhooked for a couple days, could this have caused the ecm to need re programed?
#89 of 207 Re: Same 300M Starting Problem [omahadb]
Aug 13, 2010 (11:23 pm)
I went through the same issue on my car and after much research and replacing the cam sensor crank sensor and it still happened I made them replace the PC ($600) but it did the trick. No more stalling. I will never buy a Chrysler again, but plan on driving the wheels off this one
#90 of 207 Re: Same 300M Starting Problem [Shananndora]
Aug 13, 2010 (11:59 pm)
Your telling me out of the blue clear sky your car developed an issue like this? It started up and would idle only for a few seconds, then would stall in park, cold, sitting still.
Then after 3 times it would NO longer crank over with the key anymore?
I could replace cam and crank sensors all day long that will not enguage the starter when the key is turned. This car will not crank. It seems the red light on the dash is flashing different than ever before and I do have a code P1685. Something about faulty key.
I would like to know how to rest the theft system and allow the car to start with my key I normally use. I cant help but think this is a security system issue.
#91 of 207 Reset theft security system 20000 300 m
Aug 14, 2010 (12:05 am)
Does anyone know how to bypass or rest the security system on this type car?
Seems several have had simular isses but I see no solutions. Surely someone has had this problem and knows the proper resolution.
Car started 3 times and stalled. Then would not crank using the key. All systems seem good, The red dash light flashes differently than ever before.
it had a code p1685, Skim,,,, How can I reset the system????????
#92 of 207 2000 300m code p1685 SKIM key issue
Aug 14, 2010 (5:56 am)
I had a 3 start tries and now this car will not crank . everything is in good order but I cannot figure out why It will not turn over.
The red light on dash is flashing much more than before.
The code i have says It could be a key issue. YES I tried an old key as well as the normally used key.
Now I need to know how to reset the system. So when I turn the key something happens.
Can someone help with how the security system works, and what the dealership does to reset the code/ system. Re program it so it starts.