You are here:
Forums
Sedans
Chrysler 300M
Chrysler 300M Starting/Stalling problems

70 messages, Last post on Nov 19, 2009 at 8:16 PM
You are in the Chrysler 300M Forum. Your Hosts are pat & karens
This topic covers any issues related to hard starting, no starts, stalling and erratic idling problems.
|
|
|---|---|
|
Replying to: rugga56 (Jul 21, 2009 7:35 am) good luck |
|
|
|
|
Replying to: dsisco (Aug 10, 2008 11:01 am) Anyone ever figure it out? |
|
|
Replying to: rnaples (Nov 16, 2008 5:07 am) |
|
| My car warms up and stall and will not restart till engine is cool. Code say manifold tuning valve. rplaced mtv and also the thing next to it that works off vacuum. I have also had a part changed in the transmissin because it was stuck in gear. the junck yard part are 10 a piece. What part next can you help Rich | |
| car was running fine all day, I came out the store after about 10 minutes and started it, it turned off immediately, no choking before doing so. It did this 3 times before it finally would not crank at all. The neutral switch and steering column have been replaced, battery has been checked, and I don't know what else to do. If the cam sensor is bad, would it be causing this? That is where I'm leaning right now, i will have to take it to a dealership soon if i can't figure it out. | |
|
Replying to: maizenblue989 (Jun 30, 2009 5:25 pm) |
|
You are here:
Forums
Sedans
Chrysler 300M
Chrysler 300M Starting/Stalling problems
New? Join Now!
Forum Tools
Search Forums
Browse by Vehicle
2004 Chrysler 300M



Browse by Board
Browse by Topic
Today's Chats