Last post on Dec 04, 2012 at 1:35 PM
You are in the Infiniti Q45
What is this discussion about?
Infiniti Q45, Sedan
#289 of 318 Re: Q45 1994 - lost all power windows. [dmikulcik]
Nov 30, 2010 (3:49 pm)
#290 of 318 Re: 03 Q45 Navigation and Info screen went dark. [cobrapc]
Dec 20, 2010 (11:20 am)
I'm having the same issue with my 02 Q45. Screen went dark while heat and stereo was working. I re-started the car and now only heat is working - no more stereo. Can you please tell me what did you end up doing to fix the issue?
Thanks in advance.
My e-mail address is yaaar10yahoo.com
#291 of 318 Re: Navigation screen goes blank [mlarkin1]
Dec 20, 2010 (11:34 am)
I'm having the same issue with my 02 Q45. But my screen is completely out and doesn't come back upon re-starting the car.
Would you please let me know what did you do to fix this issue and how much did it cost you?
Thanks in advance.
My e-mail is yaaar10yahoo.com
#292 of 318 Re: Do you have a question about Q45s? I can help you! [elwesso]
Dec 20, 2010 (5:46 pm)
please can you help my 91 q45a all of a sudden wont start it recently snowed where i live i parked my car for 5 days it has anti-freeze in it i went to get in it and it wouldn't start it made a strange higher pitched noise everyone said its the starter well 3 starters later still wont start same sound checked the teeth on the fly wheel their fine it turns battery is new and strong someone said fuel line another said starter relay ????/ any ideas without a manual its hard to find anything we normally own fords and pontiacs
Jan 06, 2011 (8:51 pm)
Hello, recently my water pump/power steering belt snapped in half on my 1994 Q45. I went to go and replace the belt and noticed my Idler Pulley wasn't spining freely. From what i've learned that's not good. So im looking to replace the Idler Pulley. Is this an easy fix. What steps would i need to take? Your help would be greatly appreciated. Thank you.
Jan 07, 2011 (5:48 am)
As long as you can get under your car...even a jack will work. It's quite straight forward. You will need metric wrenches. Loosen the nut on the pulley first then back out the tension bolt and back to the pulley bolt remove the whole assembly.
#295 of 318 warning lights
May 13, 2011 (12:45 pm)
i have a 2002 q45 recently it was raining very hard and my vdc abs and slip light came on said malfunction what could cause this problem all of a sudden
#296 of 318 Steering won't go "down"
Jul 22, 2011 (5:00 am)
'97 Q45 bought recently appx 150,000 miles, the telescopic antenna adjusted for driver access ease (went up, seat went back) a few times and then the steering goes all the way up and gets stuck there, a thousand down keypresses and the steering control yield to nothing, does move forward and backward but is stuck in an unsightly pose, need it lowered, any DIY? Is it a computer problem? cancelled the memory function, even then... has the motor suddenly gone bad? then why the forward / backward? or are their two motors inside the steering wheel?
#297 of 318 Re: Steering won't go "down" [imranokazmi]
Jul 22, 2011 (9:22 am)
I have a related problem with my 2002 Q45. - The steering colume will go up and down when entering/exiting the car and the up and down feature works when I use the control on the steering colume, but it will no longer telescope in and out. - I cannot find a dedicated fuse so I am thinking it must be in the control switch. Any thoughts?
#298 of 318 Re: warning lights [thall8]
Sep 26, 2011 (4:02 pm)
Did you ever resolve the issue? I now have the same problem...thanks...