Edmunds.com | Inside Line | Auto Observer Your Account | Help | Directory
You are here:
![[F]](http://a332.g.akamai.net/f/332/936/12h/www.edmunds.com/media/townhall/webxicons/site.gif){kind=small}
Forums
SUVs Isuzu Rodeo Isuzu Rodeo Transmission Questions
99 messages, Last post on Nov 03, 2009 at 7:59 AM
You are in the Isuzu Rodeo Forum. Your Hosts are steve_ & tidester
|
Replying to: tidester (Feb 10, 2007 6:08 pm)
|
|
|
Replying to: elayer (Oct 03, 2006 4:06 pm) Any ideas of what the problems is from previous experience?
|
|
|
Replying to: oylime17 (Feb 26, 2007 8:54 am) I wanted to know when is the transmission maintenance sue. The manual is not clear on this. It only suggest when to check the fluid not when it should be changed. I have asked the dealer they said every 30K. I use to have a 2000 Amigo wich has the same engine and that had a sealed transmission and had to be changed at 120,000 miles. The Rodeo I have now does not have a sealed transmission. Im also about to hit 42K.
|
|
|
Replying to: dj2big (Feb 10, 2007 7:20 am)
|
|
|
Replying to: cvieth (Mar 02, 2007 5:11 pm) Anyway, once the repair shop relaced the transmission, it seemed to be okay. Of course my bank account is $4k lighter. So much for the 10 year warranty.
|
|
|
I was wondering is there a dip stick in these rodeos? I can't find one and 4 mavchanics said I had to take it a Isuzuz dealer to have it fixed and they would just adjust it with a key. Is this true? Also when I put it in drive I can't move. Alls my car does is rev the engine up and then it jumps and then I can move again. Until I come to a complete stop and then we do it all over again. It is almost like the feeling of hitting a patch of ice. U go skating and revving the engine up only u are not moving. Now it is doing the same thing in reverse too. So what is going on here and what do I need to do. Thanks |
|
|
Hi, I'm new to this form. I'm trying to remove my manual transmission off of a 95 Rodeo V6. The orginal problem is that it got stuck in second gear. Meaning that the stick is in neutral and when I let the clutch out it goes and I cannot shift into any other gears other than 5th and reverse but when I do this I cannot move. So all of my bellhousing bolts are off and the transmission is loose but will not come off. I tried raising it and lowering in different positions but no luck. Also triple checked for any missed bolts. My guess is that it is still connected to the engine via 2nd gear. The only thing I can think to do at this point is mount the slave cylinder and have sombody push on the clutch. While I pull it out until it unlocks then remove the slave. Any suggestions? |
|
Hello fellas, just bought a 02 Rodeo Sport, When I get to an almost complete stop and let off the brake pedal there is a clunk coming out of underneath the car. Not sure if it is an mounting point, tranny or driveshaft, but at any other speeds it is just smooth. Any ideas?
|
|
In year 02 what was the factory warranty on Isuzu Rodeo's. Last time I remembered seeing like a 7/70.
|
|
|
Replying to: mvega (Apr 04, 2007 4:52 pm) 2003 warranty changed to 7/70. |
|
You are here:
Forums
SUVs Isuzu Rodeo Isuzu Rodeo Transmission Questions
New? Join Now!
Forum Tools
Search Forums
Browse by Vehicle
2003 Isuzu Rodeo Sport
Browse by Board
Browse by Topic
Today's Chats
