Edmunds.com | Inside Line | Auto Observer Your Account | Help | Directory
You are here:
![[F]](http://a332.g.akamai.net/f/332/936/12h/www.edmunds.com/media/townhall/webxicons/site.gif){kind=small}
Forums
SUVs Isuzu Rodeo Isuzu Rodeo Transmission Questions
99 messages, Last post on Nov 03, 2009 at 7:59 AM
You are in the Isuzu Rodeo Forum. Your Hosts are steve_ & tidester
|
|
|---|---|
|
Replying to: fordfan_17 (Apr 16, 2008 11:36 am) |
|
|
Replying to: dorenavant (Feb 23, 2008 2:41 am)
|
|
|
Replying to: soundrms (Apr 20, 2008 3:33 pm) The shop that replaced the tranny checked everything, the wiring, replacing the PCM, range sensor and there are no error codes. The strange thing is that when I bought the Wizard second hand a year ago the D light never came up on the dashboard, but the tranny was switching normally. Two weeks ago it started slipping between 2nd and 3rd gear, which ulitmately resulted in a burnt gearbox, without any warning. It now apppears that the cooler was clogged. In the current situation the AT temp warning is working but the D light still doesn't light up. So what could be the problem? Thanks for reading. |
|
|
I purchased a used 02 Rodeo with an automatic transmission not long ago and tonight the gear shift went on me. I had been driving, went to put the car in to park but my dash indicator said I was still in reverse and when I took my foot off the brake, the car did idle backwards. I shifted all the way down in to low and then tried to go back up to park but to no avail. I tried a second time and then when I put the shifter all the way up to try to get in to park, my dash indicator said neutral. I shifted down in to what was reverse on my gear shift which put the dash indicator and the car itself in drive and I drove home just fine. I parked it with the shifter set to park and the dash indicator and the car itself in neutral with the e brake on. When I drove it the tranny seemed to shift just fine. The trouble is the disagreement between the dash indicator (which seems to agree with the tranny itself) and the gear shift which, as it is, is preventing me from putting the car in reverse or park. Any suggestions?
|
|
|
Replying to: btrcool (Jul 03, 2008 1:33 am) One thing that sometime happens is the tranny will upshift and downshift really hard instead of the normal smooth transition between gears. Sometimes you can kind of clear this up by cycling the shifter completely through the range of gears (while sitting still with the brake on) a number of times..this might clean the contacts at least temporarily. Pictures and description of mode switch http://isuzufaq.ibctech.ca/range.pdf earlier discussions http://forum.planetisuzoo.com/viewtopic.php?t=1707 |
|
|
|
|
Replying to: justanox (Nov 12, 2007 1:13 pm) I've had it checked out for over a year by many... and no one can resolve the issue. Does anyone have a solution??
|
|
|
|
|
Replying to: ericemartin (Apr 16, 2008 11:12 am) |
|
I Have a 2002 Rodeo and having a problem with the trans, it feels like it's stuck in n gear while in drive gear with a high rpm of 4-6 and goes only about 25 mph this morning I was crawling back home over a little hill back to my house when I looked  my mph it barely moved the gears all work fine, so I'm not sure whats going on with my Rodeo can anyone shed some light on this situation?
|
|
| I have a 2002 Rodeo, and I was just wondering if there was a way to check transmission fluid levels without taking it to the dealership, and the process of doing so if doing it on your own? The dealership told me there is no other way, can someone help on this subject? | |
| just got a rodeo man told me trans was bad no pedal pressure so i bled trans master cyl it got better but still not enough pressure to put in gear what is more common master or slave cyl | |
You are here:
Forums
SUVs Isuzu Rodeo Isuzu Rodeo Transmission Questions
New? Join Now!
Forum Tools
Search Forums
Browse by Vehicle
2003 Isuzu Rodeo Sport
Browse by Board
Browse by Topic
Today's Chats
