You are here: Forums SUVs GMC Jimmy GMC Jimmy ABS Sensor

GMC Jimmy ABS Sensor

39 messages,  Last post on Nov 16, 2009 at 3:44 PM

You are in the GMC Jimmy Forum. Your Hosts are steve_ & tidester

What is this discussion about? GMC Jimmy, Brakes, SUV

Messages Page 5 of 5 1 2 3 4 5 Prev Next Last

Go To Msg # Search This Discussion

#36 of 39 Re: 2001 CHEVY BLAZER ABS [diablo3] by rybeck3 Jul 04, 2009 (1:02 pm)
Replying to: diablo3 (Jan 25, 2007 2:43 am) I had the same problem and replaced the abs unit that I picked from the junk yard. This did help but I still get that groaning noice. I tried to clean the sensor myself but it was pretty rusted. I think I will try this next. Thanks
#37 of 39 Re: ABS AND BRAKE LIGHT [mcg24] by salvadorjimmy Oct 07, 2009 (6:52 pm)
Replying to: mcg24 (Jul 01, 2008 5:45 am) HAVE A 2001 GMC JIMMY 4X4 THE BRAKE LIGHT AND THE ABS LIGHT COMES ON SOMETIMES. WHEN THE LIGHTS ARE ON I HAVE NO PROBLEM WITH THE BRAKES AT ALL THE VEHICLE STOPS LIKE NORMAL. I CHECKED THE FLUID IT FULL. I'M THINKING IT MAY BE A ABS SENSOR GOING OUT OR I KNOW IN SOME VEHICLE THESE LIGHT COMES ON WHEN THE SPEED SENSOR GOES OUT. CAN THIS BE CHECKED WITH THE LIGHTS NOT BEING ON ALL THE TIME.
#38 of 39 ABS and Radio by harvm Oct 08, 2009 (3:04 am)
My 2001 Tahoe LE has brake and ABS dash lights on. Gotta get the thing state (TX) inspected asap. Also, radio speakers quit speaking. Are the two problems, ABS and speakers, related?
#39 of 39 Re: abs brakes [rbonham44] by rsher0001 Nov 16, 2009 (3:44 pm)
Replying to: rbonham44 (Apr 27, 2008 6:31 pm) Had the same issue sort of, found a service bulletin from Chevy ... there is a plate on the wheel hub between the sensor and the hub, rust builds up under the plate and raises the sensor too high .... I disassembled, removed the sensor, scraped out the rust (becareful to not get loose rust in the hub) and the problem disappeared...

Messages Page 5 of 5 1 2 3 4 5 Prev Next Last

Go To Msg # Search This Discussion

You are here: Forums SUVs GMC Jimmy GMC Jimmy ABS Sensor