You are here:
Forums
SUVs
Toyota Sequoia
2008 Toyota Sequoia

1870 messages, Last post on Nov 11, 2009 at 8:40 AM
You are in the Toyota Sequoia Forum. Your Hosts are steve_ & tidester
|
Replying to: sinecure (Jan 22, 2009 12:49 pm) I am curious about how confident you are in your diagnosis? I still haven't had a chance to investigate yet. Also, do you have any experience at all with dealers taking care of these type of things? I have no idea how intrusive of a fix this is, or how willing dealers are to address items like this...anyone with any experience on these types of things? I wonder how easy it is to get into that space... Thanks for the feedback, much appreciated...
|
|
|
Replying to: bogartd (Jan 22, 2009 6:20 pm)
|
|
|
Replying to: kiiwii (Jan 22, 2009 8:56 pm) |
|
|
Replying to: bogartd (Jan 22, 2009 6:20 pm) Sometimes rattles and squeeks can be perplexing, but I'm confident that we've isolated our rattle. Just a little pressure on the duct stops the rattle and I can easily make the duct tap the steel roof. Dealers will fix easy to isolate squeeks and rattles, but aren't too keen on tracking down and fixing the tougher cases. For example, I bought a 95 Avalon new - drove it 236,000 miles then gave it to my nephew - that had a wind noise problem the dealer was not able to fix. The dealer made two bona fide efforts (unfortunately, not without some firm encouragement) I just decided to accept this defect and appreciate the car as a whole. |
|
|
Hi, I have a couple of blank spots on my dash where factory switches can be mounted. I have a loaded Platinum, so I assume these must be for options in Japan or something that is not offered in the US. I need to mount a switch for a project I am working on and am looking for options. I would like to find something aftermarket that would mount into those panels. The toyota switches are all prelabeled and really would not do what I want. I want to put a simple toggle switch in but I would like for it to look as professional as possible. Anyone have a line on a good dealer for something like this? Chris |
|
|
Ha - speaking about extra blank spots on the dash - I was just commenting on the ONE that I have on my dash - Same here - loaded 4X4 Plat but I have one blank spot to the right of the passenger heated seat scroll wheel. TO the left I have the AUX switch - so possible an additinal Aux Switch. Does anyone know what this blank is for? |
|
|
Replying to: sinecure (Jan 22, 2009 12:49 pm) |
|
|
Replying to: jomer001 (Feb 03, 2009 11:02 am) My biggest fear is having the dealer address it, and them attempting to do so (with all good intention) and either making the problem worse or introducing other problems. |
|
|
Replying to: jomer001 (Feb 03, 2009 11:02 am) It turned out to be the front passenger shoulder strap buckle which was flipped upside down and gently banging (rattling) against the seat. It was left rubbing against the upper side of the seat and simply needed to be flipped down flat against the strap. Problem solved...sound gone. May or may not be your issue however I thought it was worth sharing. |
|
|
Replying to: hdfatboy (Feb 03, 2009 5:36 pm) I honestly haven't gotten in the back seat with someone else is driving to really isolate it...but I can fairly confidently say it is coming from the ceiling, just behind the driver's seat...and I can also reach back and by applying a very small amount of pressure in the right spot on the ceiling actually eliminate/stop the noise. So I am pretty confident there is something loose up there... We have only had the vehicle a short period, and just haven't had a chance to get back there while someone else is driving to really search it out yet. I am definitely anxious to hear peoples experience getting this addressed...
|
|
You are here:
Forums
SUVs
Toyota Sequoia
2008 Toyota Sequoia
New? Join Now!
Forum Tools
Search Forums
Browse by Vehicle
2010 Toyota Sequoia



Browse by Board
Browse by Topic
Today's Chats