Sign In Join 



Mazda CX-7 OEM and Aftermarket Accessories

65 messages,  Last post on Jul 22, 2009 at 5:39 PM

You are in the Mazda CX-7 Forum. Your Hosts are steve_ & tidester

What is this discussion about? Mazda CX-7, SUV


Messages Page 5 of 7
1
2
3
4
5
6
7
Prev
Next
Last
Go To Msg #
Search This Discussion

#36 of 65
Re: Roof Rack and/or Yakimas [maltb] by rex10
Feb 15, 2007 (12:13 pm)
Reply

Replying to: maltb (Jan 23, 2007 5:30 pm)

I saw a post elsewhere that the correct mightymounts for Yakima are 10V and 24H. Yesterday I went and bought the 10V and they fit the factory rack perfectly (don't know about the 24H).
 
I agree with other posts that the factory rack is very easy to install by yourself. The little tabs slide off or can be gently pried in the correct direction with a tiny screwdriver, then you just put the racks on and screw them into the mounting posts.
 
I'd like to see if Yakima ever makes a "landing pad" that works with the posts on the CX-7. That would be a very nice way to have Yakimas attach to the car. All of the "landing pad" bases I've seen so far have two mounting holes, not one.
#37 of 65
Re: Roof Rack and/or Yakimas [rex10] by defreitasm
Feb 15, 2007 (6:51 pm)
Reply

Replying to: rex10 (Feb 15, 2007 12:13 pm)

I considered adding a rack but until I see an OEM in person I'm not sure I want one. I'm not crazy about the way it looks in pictures and it has to kill the aerodynamics. If I had a real use for it I might cave in. Truthfully I only ever used a roof rack once to attach a cargo carrier because I overpacked for a family vacation and to transport some ladders when I bought a house. Other than that I really only need roof rails so I can tie a xmas tree to like I had on my Odyssey minivan. They did have cross bars available for the minivan but the van roof was pretty sturdy. On the other hand the CX7 roof is smooth and not ribbed so it may not be as solid. I guess one option might be to install it only as needed and remove it when not.
#38 of 65
Re: Roof Rack and/or Yakimas [defreitasm] by vbbuilt
Feb 16, 2007 (5:20 am)
Reply

Replying to: defreitasm (Feb 15, 2007 6:51 pm)

For some reason, the CX-7 just wouldn't look right with a roof rack! The essence of Zoom-Zoom would be lost
#39 of 65
Re: Roof Rack and/or Yakimas [vbbuilt] by defreitasm
Feb 16, 2007 (9:32 am)
Reply

Replying to: vbbuilt (Feb 16, 2007 5:20 am)

I agree, but if it had rails it wouldn't be so bad. The OEM rack on the hand kills the look and I just couldn't deal with except for functionality.
#40 of 65
Re: Roof Rack and/or Yakimas [defreitasm] by maltb
Feb 16, 2007 (10:18 am)
Reply

Replying to: defreitasm (Feb 16, 2007 9:32 am)

The OEM racks are very easy to install and remove, but I tend to keep mine on about 50% of the time as I practically live at Home Depot. I don't get much wind noise so I assume they don't spoil the airflow too much. However, if I put a ladder on the roof it howls like a mofo.
 
Also, some have commented to me that the CX-7 looks better with the racks.
#41 of 65
Re: Roof Rack and/or Yakimas [maltb] by defreitasm
Feb 16, 2007 (11:49 am)
Reply

Replying to: maltb (Feb 16, 2007 10:18 am)

OK if you practically live at Home Depot then tell me what isle number I can find shear pins for snow blowers. LOL
 
Looks are subjective and I'm sure it looks fine with the rack and probably makes it look unique. Hell... I may even end up with one so that I can use it as needed.
#42 of 65
Re: Roof Rack and/or Yakimas [defreitasm] by maltb
Feb 16, 2007 (1:27 pm)
Reply

Replying to: defreitasm (Feb 16, 2007 11:49 am)

Snow blowers....I've seen pictures of those before but never seen one in real life.
 
But back to shear pins: I frequent 5 different Home Depots with 5 different layouts, so would that be Orange 1, Orange 2, Anaheim Hills, Tustin or El Toro?
 
And looks: No doubt we all like different things, but I think most in here agree that the CX-7 is quite good looking.
#43 of 65
Bluetooth Integration by blstanle
Feb 16, 2007 (3:33 pm)
Reply
Has anyone come across or heard of a rear view mirror for the CX-7 with Bluetooth integration?
#44 of 65
Re: Bluetooth Integration [blstanle] by defreitasm
Feb 17, 2007 (12:02 am)
Reply

Replying to: blstanle (Feb 16, 2007 3:33 pm)

I believe the ones I've seen on the web fit any car
#45 of 65
New badging by vbbuilt
Feb 18, 2007 (12:16 pm)
Reply
Some new pics. Notice the new Turbo badge
 

 

 

 
Got the turbo badge from a local Acura dealer. Found their website which allowed you to order online and then pick up at their dealership. Unfortunately, they don't ship to the house. Cost about $19 with tax.
 
Vince.

Messages Page 5 of 7
1
2
3
4
5
6
7
Prev
Next
Last
Go To Msg #
Search This Discussion
To POST a message, please Sign In.

New? Join Now!

Forum Tools

Please sign in.
Email Address:

Password:

Forgot Password?

Search Forums

Enter Keyword(s)

Advanced Search

Browse by Vehicle



View All Vehicles
Advertisement
Ask the Community
See What People Are Asking

Browse by Board

Browse by Topic


View All Topics

Today's Chats

Advertisement