You are here: Forums Pickups Chevrolet S-10 & GMC S15 Sonoma Chevy S10 - GMC S15 and Sonoma Electrical Problems

Chevy S10 - GMC S15 and Sonoma Electrical Problems

322 messages,  Last post on Dec 08, 2009 at 10:42 AM

You are in the Chevrolet S-10 & GMC S15 Sonoma Forum. Your Host is kcram

What is this discussion about? Chevrolet S-10, GMC S-15, GMC Sonoma, Electrical, Truck

Messages Page 31 of 33 1 ... 27 28 29 30 31 32 33 Prev Next Last

Go To Msg # Search This Discussion

#297 of 322 A/C Issue by gthang2008 Sep 18, 2009 (2:46 pm)
I have a 95 S-10 ZR2 and have changed the blower motor and the interior blower switch but still cannot get it to blow on the highest setting. I am wondering if it is the relay or not, and if so, whereabouts is it located on the truck? Thanks, Eddie Replies to this message: the_big_al (Sep 18, 2009 10:50 pm)
#298 of 322 Re: A/C Issue [gthang2008] by the_big_al Sep 18, 2009 (10:50 pm)
Replying to: gthang2008 (Sep 18, 2009 2:46 pm) Is the motor not blowing on the highest setting, or is it blowing on the highest setting (you can hear the motor blowing), but aren't getting the proper air volume??
#299 of 322 throttle position sensor by k8v Sep 22, 2009 (2:29 pm)
I would like to know where is the throttle position sensor located on my 97 gmc sonoma and how hard is it to replace? Replies to this message: biomed86 (Sep 23, 2009 5:33 am)
#300 of 322 Re: throttle position sensor [k8v] by biomed86 Sep 23, 2009 (5:33 am)
Replying to: k8v (Sep 22, 2009 2:29 pm) That sensor is on the opposite side of the cable coming from the accelerator pedal, it should be pretty easy to replace !!
#301 of 322 Re: 99 s10 V6 electrical stall [meate] by holy_roller Sep 23, 2009 (11:53 am)
Replying to: meate (Sep 10, 2009 8:23 pm) No solutions yet...as soon as I get some cash saved up I'm buying something else and selling it, sigh.
#302 of 322 1994 Sonoma Eletrical Problem by pinksonoma1994 Sep 30, 2009 (4:57 pm)
I have a 1994 2.2L 5 Speed Manual Sonoma, I bought it used and it ran fine for the first year I owned it. One day driveing home from work the truck's RPM's droped slightly and when I tried to push on the gas the truck had little to no power. Since then i've tried many things such as a tune up and checking all basic tests. I found out that if you unplug the altenator or the fuse that it is hooked to the truck will run fine but die as soon as the battery runs out. I replaced the altenator it wasn't it. I replaced alot of sensors the only thing else i could think of is a short. IF ANYONE HAS ANY IDEA OF WHAT IT COULD BE PLEASE REPLY IVE DRIVIN LIKE THIS FOR 8 MONTHS. Replies to this message: gonogo (Oct 01, 2009 9:18 am) pinksonoma1994 (Oct 01, 2009 4:52 pm) gonogo (Oct 02, 2009 6:55 am)
#303 of 322 Re: 1994 Sonoma Eletrical Problem [pinksonoma1994] by gonogo Oct 01, 2009 (9:18 am)
Replying to: pinksonoma1994 (Sep 30, 2009 4:57 pm) Only thing I can think of is the ignition module or the PCM can't handle 14 volts anymore, just a guess though. Replies to this message: pinksonoma1994 (Oct 01, 2009 4:52 pm) gonogo (Oct 02, 2009 6:55 am)
#304 of 322 Re: 1994 Sonoma Eletrical Problem [gonogo] by pinksonoma1994 Oct 01, 2009 (4:52 pm)
Replying to: gonogo (Oct 01, 2009 9:18 am) Checked Position Censor already but i will have to check the ignition module thanks. Replies to this message: gonogo (Oct 02, 2009 6:55 am)
#305 of 322 Re: 1994 Sonoma Eletrical Problem [pinksonoma1994] by gonogo Oct 02, 2009 (6:55 am)
Replying to: pinksonoma1994 (Oct 01, 2009 4:52 pm) PCM Power Train Control Module. It's the engine computer.
#306 of 322 1994 Sonoma Eletrical Problem by pinksonoma1994 Oct 03, 2009 (7:49 am)
That was one of things we were looking at but for some reason never checked I guess I should then.

Messages Page 31 of 33 1 ... 27 28 29 30 31 32 33 Prev Next Last

Go To Msg # Search This Discussion

You are here: Forums Pickups Chevrolet S-10 & GMC S15 Sonoma Chevy S10 - GMC S15 and Sonoma Electrical Problems